Influence of natural events on the concentration and composition of atmospheric particulate matter

A ten-month field study aimed to determine the contribution of natural events (i.e. sea-salt and mineral dust events) to urban PM concentration was carried out at six sampling sites in Central Italy (Lazio region). Four indicators have been used to identify natural events during the period of the study. The first one is constituted by the ratio between number of particles in the coarse to the accumulation mode. It is simple, cheap, and the information are given in quasi-real time, but the nature of the event (sea-salt or mineral dust) is not detectable. The second indicator relies on the chemical analysis of the collected PM by X-ray fluorescence (XRF) and allows a robust identification of sea-salt and crustal components. The third one is based on diagnostic ratios of elemental fractions: Mg_extractable/Ti_residue for sea-salt and Ti_residue/Sb_residue for mineral dust. It requires skilled staff but it is most accurate and sensible. The last indicator, constructed on the basis of natural radioactivity data, is not diagnostic for the nature of the event but it is able to estimate the increase in PM concentration with respect to the expected concentration in the absence of natural events.The relevance of natural events and the variations in PM concentration and composition during the study are discussed. The joined use of the four indicators allowed the identification of about 20 natural PM episodes. In general, sea-salt aerosol events did not cause exceedance of the daily EU limit value for PM₁₀. Saharan dust events, instead, were in most cases responsible for the exceedance of the limit value at all stations.     

PBDEs and PCBs in sediments of the Thi Nai Lagoon (Central Vietnam) and soils from its mainland

Concentration and distribution of PCBs, PCB 11, and PBDEs in both surficial sediment and soil samples, taken from a zone subject to recent accelerated development, were investigated to assess the environmental quality and understand both natural and anthropogenic processes that influence contaminant behaviors. Values of PCB and PBDE are in the lower range of those reported in literature, typical of low impacted coastal zones. This could be due to efficient processes of resuspension and removal. Contaminants in the lagoon showed higher concentrations in sediments from sites close to the city and the outfalls of the industrial area, while soils showed maximum values in the northern samples. In addition, congener patterns and statistical analyses suggest the presence of effective degradation processes, especially for PBDEs, with the exception of the most concentrated samples that may indicate a direct input. PCB 11 is a significant component (up to 18%) in most lagoon sediments. Its presence is strongly associated with fine particles, thus the distribution seems to be driven mainly by the system hydrodynamic and does not trace the sources. Due to evaporation, only flooded agricultural soils show a similar relative abundance of this congener.     

Occurrence and congener specific profiles of polybrominated diphenyl ethers and their hydroxylated and methoxylated derivatives in breast milk from Catalonia

The presence of polybrominated diphenyl ethers (PBDEs) from mono to hepta brominated and 11 hydroxylated (OH-) and methoxylated (MeO-) PBDEs was examined in 37 breast milk samples collected from 11 mothers living in Barcelona. An extraction method based on accelerated solvent extraction followed by gas chromatography coupled to high resolution mass spectrometry was used to inequivocally identify all target compounds at the low pg g(-1) lw level. Data obtained were examined for absolute and relative concentrations and specific PBDE, OH- and MeO-PBDE congener patterns. Sigma PBDE concentration ranged between 1,161 and 1,372,797 pg g(-1) lw and BDEs 47, 99, 100, 153 and 183 accounted for more than 80% of the total PBDEs. All tri and tetra OH- and MeO-PBDEs compounds were detected at levels between 6 and 14,984 pg g(-1)lw. The median ratio OH/PBDE and MeO-PBDEs/PBDEs was from 2.9% to 1.6%, respectively, suggesting either that PBDE metabolism to OH- and MeO- derivatives is not an important degradation route in humans or either OH- and MeO-PBDEs are rapidly excreted. No significant correlation was observed between PBDEs and OH- and MeO-PBDE, although OH- and OMe-PBDEs co-occurred in mothers' milk (R(2)=0.5349). According to the daily intake of PBDEs and OH- and MeO-PBDEs, which was between 0.47 and 363 ng d(-1) (excluding a smoking donor), potential health risks associated with these compounds are assessed.     

Evaluation of concentration efficiency of the Pseudomonas aeruginosa phage PP7 in various water matrixes by different methods

Enteric viruses monitoring in surface waters requires the concentration of viruses before detection assays. The aim of this study was to evaluate different methods in terms of recovery efficiencies of bacteriophage PP7 of Pseudomonas aeruginosa, measured by real-time PCR, using it as a viral control process in water analysis. Different nucleic acid extraction methods (silica–guanidinium thiocyanate, a commercial kit (Qiagen Viral RNA Kit) and phenol–chloroform with alcohol precipitation) exhibited very low recovery efficiencies (0.08–4.18 %), being the most efficient the commercial kit used for subsequent experiments. To evaluate the efficiency of three concentration methods, PBS (as model for clean water) and water samples from rivers were seeded to reach high (HC, 10⁶ pfu ml^?1) and low concentrations (LC, 10⁴ pfu ml^?1) of PP7. Tangential ultrafiltration proved to be more efficient (50.36?±?12.91, 17.21?±?9.22 and 12.58?±?2.35 % for HC in PBS and two river samples, respectively) than adsorption–elution with negatively charged membranes (1.00?±?1.34, 2.79?±?2.62 and 0.05?±?0.08 % for HC in PBS and two river samples, respectively) and polyethylene glycol precipitation (15.95?±?7.43, 4.01?±?1.12 and 3.91?±?0.54 %, for HC in PBS and two river samples, respectively), being 3.2–50.4 times more efficient than the others for PBS and 2.7–252 times for river samples. Efficiencies also depended on the initial virus concentration and aqueous matrixes composition. In consequence, the incorporation of an internal standard like PP7 along the process is useful as a control of the water concentration procedure, the nucleic acid extraction, the presence of inhibitors and the variability of the recovery among replicas, and for the calculation of the sample limit of detection. Thus, the use of a process control, as presented here, is crucial for the accurate quantification of viral contamination.     

Kinetic behavior of anti-inflammatory drug ibuprofen in aqueous medium during its degradation by electrochemical advanced oxidation

The electrochemical abatement of the drug ibuprofen (2-(4-isobutylphenyl)propionic acid) from aqueous solution has been carried out by anodic oxidation. The electrolyses have been performed at constant current using a small, undivided cell equipped with a Pt or thin-film boron-doped diamond (BDD) anode and a carbon-felt cathode. The results have shown that ibuprofen has been destroyed under all the conditions tested, following pseudo-first-order kinetics; however, BDD enables higher removal rates than Pt, because the former produces greater quantity of ^?OH. Using BDD anode, the pseudo-first-order rate constant increased with applied current and when NaCl replaced Na₂SO₄ as supporting electrolyte, while it is almost unaffected by ibuprofen concentration. Mineralization of ibuprofen aqueous solutions was followed by total organic carbon (TOC) measurements. After 8 h of electrolysis, TOC removal varied from 91 % to 96 % applying a current in the range of 50–500 mA. The reaction by-products were quantified by chromatographic techniques, and in particular, aliphatic acids (oxalic, glyoxylic, formic, acetic, and pyruvic) have been the main intermediates formed during the electrolyses. The absolute rate constant for the oxidative degradation of ibuprofen have also been determined, by competition kinetic method, as 6.41?×?10⁹ M^?1?s^?1.     

Application of membrane bioreactor technology for wastewater treatment and reuse in the Mediterranean region: Focusing on removal efficiency of non-conventional pollutants

The Mediterranean Region is a semi-arid area whose land is facing serious erosion, causing adverse impacts on agriculture. To improve the water availability, researchers have proposed the reclamation and reuse of treated wastewater. In this paper, we report the main findings of 10 years of research on the efficiencies of a conventional activated sludge process and a submerged membrane bioreactor, with particular emphasis on the removal of non-conventional pollutants. The studies showed that the membrane bioreactor produced a virtually solids-free, high-quality permeate: most nutrients, heavy metals, and persistent organic pollutants were removed, and in particular, dioxins, furans, and polychlorinated biphenyls were typically present at concentrations below the detection limit. Moreover, the total coliforms count decreased by 4–5 log and Escherichia coli was absent from the membrane bioreactor permeate. These results, combined with the continuing reduction of the capital and operating costs for this approach, suggest that membrane bioreactors are an increasingly cost-effective technology to produce treated effluents that are suitable for reuse.