Directions of Change in Land Cover and Landscape Patterns from 1957 to 2000 in Agricultural Landscapes in NW Spain

The aim of this work is the analysis of the dynamics in cultural landscapes, focused on the spatial distribution of changes in land cover and landscape patterns, and their possible linkages. These dynamics have been analyzed for the years 1957 and 2000 in a sector of the north of Galicia (NW Spain) characterized with diverse landscapes. Afforestation processes linked to agriculture abandonment and forestry specialization were the main processes observed in the study area, with the exception of the southern mountainous sector that was dominated by ploughing of scrubland for conversion into grassland, reflecting a specialization in livestock production. The structural changes that have taken place in most of the study area were related to the heterogeneity aspects, although the mountainous sectors were characterized by changes in heterogeneity and fragmentation. According to the tests performed, the comparison of the spatial distribution of both dynamics showed a certain statistical significance, reflecting the interrelationship between patterns and processes. This approach could be useful for the identification of areas with similar characteristics in terms of spatial dynamics so as to define more effective and targeted landscape planning and management strategies.     

Evaluation of an Exposure Assay to Measure Uptake of Sediment Pah by Fish

The ecological risks of polynuclear aromatic hydrocarbons (PAH) in aquatic sediments will vary with both toxicity and bioavailability to aquatic biota. While there are standardized protocols to test the acute toxicity of sediment-borne compounds to aquatic invertebrates, there are none for assessing bioavailability to fish. We found that sediment-borne PAH caused an exposure-dependent induction of cytochrome P450 (CYP1A) enzymes in rainbow trout (Oncorhynchus mykiss) fingerlings exposed in semi-static 96 h bioassays, as shown by increased activity of ethoxyresorufin-o-deethylase (EROD). Assuming that PAH are taken up by trout due to partitioning from organic and inorganic constituents of sediments, we tested the effect of different test variables on bioaccumulation using induction as an index of exposure. EROD activity increased with exposure of fish to increasing volumes of sediments containing PAH, i.e., with increasing ratios of sediment to water. Uptake of single compounds from sandy sediments did not differ from uptake from clay or low organic (7% LOI — loss on ignition) sediments, but decreased when organic content was very high (58% LOI). Maximum induction was observed within 24~h of exposure and at 7.5^C relative to 15, 22, or 28^C. Storage and handling techniques had minor effects on sediment EROD induction potency. Absolute EROD activity was greater in white sucker (Catostomus commersoni) a benthic species, than in trout, a pelagic species. However, when basal (negative control) activity was accounted for, there was no difference in response between the species. Together, these experiments provide a basis for developing a standard protocol to test the bioavailability to fish of sediment-borne PAH.     

Contamination Levels and Preliminary Assessment of the Technical Feasibility of Employing Natural Attenuation in 5 Priority Areas of Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil

Five priority areas of potential impact by contaminants (API) were investigated at the Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil with the following aims: (i) to identify both organic and inorganic contaminants present in soil and groundwater; (ii) to define the environmental conditions relevant for microbial activity at the site and (iii) to evaluate the feasibility of employing natural attenuation for treatment of the hydrocarbon contamination. One area (API 1) was an uncontrolled landfill, where waste materials from the refinery were deposited between 1954 and 1986, and four areas (API 4, 5, 7 and 11) were located in the operational section of the refinery. Soil contamination by regulated BTEX compounds (benzene, toluene, total xylenes) was restricted to two samples from API 1. Nonregulated ethylbenzene was detected in one soil sample from API 4, one from API 5 and two from API 1. No soil contained regulated PAH above threshold levels. Several nonregulated PAHs were found in 6 soil samples from API 1, 3 soil samples from API 4 and 1 soil sample from API 5. Site soils contained very high aluminium concentrations, but metal contamination was restricted to one soil sample from API 1, which contained nickel above threshold limits. BTEX contamination of groundwater was due mostly to benzene. Of the 17 PAH molecules tested, only naphthalene and 2-methylnaphthalene occurred in groundwater. The sum of total BTEX and total PAH exceeded 200 μg/L in only a few monitoring wells in API 4, 5 and 11 and was always below 2.640 μg/L. Be, Cd, Cr, Cu, Hg, Ni, Se, Ag, Tl and Zn were not detected in groundwater, which was contaminated in a few locations by aluminium (mostly below 1 mg/L), lead (<0.066 mg/L) and arsenic (<0.056 mg/L). S, K, Ca, Mg and Fe were present in groundwater in excess of physiological requirements for microbial growth, but low concentrations of N and P could become growth limiting. However, BTEX were efficiently degraded in saturated and unsaturated zone microcosms and nutrient amendments did not stimulate biodegradation rates measurably. The inorganic carbon pool in groundwater was up to one order of magnitude larger than the organic carbon pool. Total inorganic carbon (TIC) in API groundwater exceeded TIC of clean groundwater by factors of 2 (API 4), 6 (API 5, 7 and 11) or 10 (API 1). Most of the inorganic carbon incorporated into groundwater beneath the refinery originated from biodegradation in the unsaturated soil, which contained a microbiota (10⁶ cells/g on average) capable of growth with most of the pure (benzene, toluene, ethylbenzene and xylene) and mixed hydrocarbons tested (diesel oil, gasoline, naphtha, condensate, aromatic residue and fuel oil). A viscous hydrocarbon paste uncovered in API 1 was insoluble in water but dissolved in dichloromethane. Many organic components of this paste were biodegradable as evidenced by weight reduction of the hydrocarbon paste and by the growth of suspended and attached biomass in saturated zone microcosms, where the paste was the only carbon source. This study indicates that monitored natural attenuation may be a technically feasible and efficient means for plume control in API 1, 4 and 5, provided the plumes in API 4 and 5 are not expanding. This technique is not suitable for contaminant reduction in API 11.     

Analysing demand for environmental quality: a willingness to pay/accept study in the province of Siena (Italy)

The province of Siena, Italy, enacted a new garbage plan (NGP) with the objective of increasing separate waste collection (SWC), shutting down six landfills and increasing incineration. The aim of the paper is to evaluate costs and benefits of the NGP. The hypothesis is that willingness to pay (WTP) should reflect the value to the community of having better environmental quality, according to the Contingent Valuation literature. The paper reports the results of a contingent valuation (CV). The sample was divided into two subsets: firms and households. Through the information gathered via a detailed questionnaire, parametric and non-parametric estimates were elaborated to analyse the WTP of the population for the benefits flowing from increased SWC, increased incineration and shutting down of landfills. These values were expressed as a share of the tax actually paid. Although a small subset of firms and households valued increasing incineration less positively, requesting compensation, on the whole interviewees (with large differences between firms and households) had a net positive WTP for the provisions included in NGP. Parametric estimation procedures enabled us to analyse the economic as well as social and demographic factors affecting these results. These elements are useful for computing a value for the waste charge that also reflects external effects. Finally, we estimated household income elasticity of WTP for the increase in SWC and found less than one: environmental quality is not a luxury good.     

Degradation of atrazine using solar driven fenton-like advanced oxidation processes

Atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) was degraded using cobalt-peroximonosulfate (Co/PMS) advanced oxidation process (AOP). Three Co concentrations (0.00, 0.25 and 0.50 mM) and five peroximonosulfate (PMS) concentrations (0, 5, 8, 16 and 32 mM) were tested. Maximum degradation reached was 88% using dark Co/PMS in 126 minutes when 0.25 mM of cobalt and 32 mM of PMS were used. Complete atrazine degradation was achieved when the samples were irradiated by the sun under the same experimental conditions described. Tests for identification of intermediate products allowed identification and quantification of deethylatrazine in both dark and radiated conditions. Kinetic data for both processes was calculated fitting a pseudo-first order reaction rate approach to the experimental data. Having kinetic parameters enabled comparison between both conditions. It was found that the kinetic approach describes data behavior appropriately (R2 > or = 0.95). Pseudo-kinetic constants determined for both Co/PMS processes, show k value of 10(-4) for Co/PMS and a k value of 10(-3) for Co/PMS/ultraviolet (UV). This means, that, with the same Co/PMS concentrations, UV light increases the reaction rate by around one order of magnitude than performing the reaction under dark conditions.     

Synthesis of BiVO4/TiO2 composites and evaluation of their photocatalytic activity under indoor illumination

BiVO₄/TiO₂ composites with different weight ratios have been prepared by coprecipitation-based reactions followed by either thermal or hydrothermal treatment with the aim of evaluating the TiO₂ photosensitization by BiVO₄. The obtained materials present in all cases the desired monoclinic phase of BiVO₄ and anatase phase of TiO₂. Visible light absorption increased with increasing amount of bismuth vanadate. XPS results reveal the surface enrichment of Ti with respect to the bulk composition in samples characterised by a higher content of BiVO₄. The photocatalytic activity of the prepared materials was tested for the degradation of isopropanol in the gas phase under indoor illumination conditions. Although none of the composites was able to improve the activity of TiO₂, the low BiVO₄ containing samples appear as more suitable for further synthesis tuning.     

Biogas from the organic fraction of municipal solid waste: Dealing with contaminants for a solid oxide fuel cell energy generator

The present work investigates electricity production using a high efficiency electrochemical generator that employs as fuel a biogas from the dry anaerobic digestion of the organic fraction of municipal solid waste (OFMSW).The as-produced biogas contains several contaminants (sulfur, halogen, organic silicon and aromatic compounds) that can be harmful for the fuel cell: these were monitored via an innovative mass spectrometry technique that enables for in-line and real-time quantification.A cleaning trap with activated carbons for the removal of sulfur and other VOCs contained in the biogas was also tested and monitored by observing the different breakthrough times of studied contaminants.The electrochemical generator was a commercial Ni anode-supported planar Solid Oxide Fuel Cell (SOFC), tested for more than 300 h with a simulated biogas mixture (CH₄ 60 vol.%, CO₂ 40 vol.%), directly fed to the anode electrode. Air was added to promote the direct internal conversion of CH₄ to H₂ and CO via partial oxidation (POx).The initial breakthrough of H₂S from the cleaning section was also simulated and tested by adding ～1 ppm(v) of sulfur in the anode feed; a full recovery of the fuel cell performance after 24 h of sulfur exposure (～1 ppm(v)) was observed upon its removal, indicating the reliable time of anode exposure to sulfur in case of exhausted guard bed.     

Benthic foraminiferal distribution on the southeastern Brazilian shelf and upper slope

Foraminiferal data were obtained from 66 samples of box cores on the southeastern Brazilian upper margin (between 23.8°–25.9°S and 42.8°–46.13°W) to evaluate the benthic foraminiferal fauna distribution and its relation to some selected abiotic parameters. We focused on areas with different primary production regimes on the southern Brazilian margin, which is generally considered as an oligotrophic region. The total density (D), richness (R), mean diversity ([`(H^￠ )] \overline{{H^{\prime } }} ), average living depth (ALD _X ) and percentages of specimens of different microhabitats (epifauna, shallow infauna, intermediate infauna and deep infauna) were analyzed. The dominant species identified were Uvigerina spp., Globocassidulina subglobosa, Bulimina marginata, Adercotryma wrighti, Islandiella norcrossi, Rhizammina spp. and Brizalina sp.. We also established a set of mathematical functions for analyzing the vertical foraminiferal distribution patterns, providing a quantitative tool that allows correlating the microfaunal density distributions with abiotic factors. In general, the cores that fit with pure exponential decaying functions were related to the oligotrophic conditions prevalent on the Brazilian margin and to the flow of the Brazilian Current (BC). Different foraminiferal responses were identified in cores located in higher productivity zones, such as the northern and the southern region of the study area, where high percentages of infauna were encountered in these cores, and the functions used to fit these profiles differ appreciably from a pure exponential function, as a response of the significant living fauna in deeper layers of the sediment. One of the main factors supporting the different foraminiferal assemblage responses may be related to the differences in primary productivity of the water column and, consequently, in the estimated carbon flux to the sea floor. Nevertheless, also bottom water velocities, substrate type and water depth need to be considered.     

Development of a PCR protocol for the detection of Escherichia coli O157:H7 and Salmonella spp. in surface water

Escherichia coli O157:H7 and Salmonella are pathogenic microorganisms that can cause severe gastrointestinal illness in humans. These pathogens may be transmitted in a variety of ways, including food and water. The presence of Salmonella and E. coli O157:H7 in surface waters constitutes a potential threat to human health when used for either drinking or recreation. As with most waterborne pathogens, Salmonella and E. coli O157:H7 are difficult to detect and enumerate with accuracy in surface waters due to methodological limitations. The aim of this study was to develop a protocol for the detection of Salmonella spp., E. coli O157:H7 and E. coli virulence genes (stx ₁, stx ₂ and eae) in water using a single enrichment step and PCR. In spiked water samples, PCR results showed high sensitivity (<3 CFU/L) for both microorganisms. The protocol developed in this study has been applied in different surface waters in association with microbiological and physical analysis. The frequency of PCR positive samples was 33% for Salmonella and 2% for E. coli O157:H7 producing intimin (eae) and Shiga-like toxin I (stx ₁). Moreover, the finding of amplicons corresponding to eae and stx ₁ genes in the absence of E. coli O157:H7 suggested the possible presence of other pathogenic bacteria that carry these genes (e.g. EHEC, Shigella strains). The results obtained showed that the developed protocol could be applied as a routine analysis of surface water for the evaluation of microbiological risks.     

Anthropogenic contaminants in freshwater from the northern Antarctic Peninsula region

This study aimed to evaluate the presence of ultraviolet filters (UV-Fs), benzotriazoles, pyrethroids and per- and polyfluoroalkyl substances (PFASs) in freshwater and wastewater from the northern Antarctic Peninsula region. All water samples analyzed contained UV-Fs residues and high concentrations were detected in anthropogenic impacted sites (< LOD up to 1300 ng/L). Likewise, benzotriazoles were detected in all water samples (< LOQ–920 ng/L). Regarding suspended particulate matter, almost all UV-Fs and all benzotriazoles were measured at concentrations ranging from < LOQ to 33 µg/g dry weight. Pyrethroids were also detected (< LOQ–250 ng/L) and their presence implies the existence of a gateway to the Antarctica Peninsula from other regions. The data confirmed the presence of PFASs (< LOD–7500 ng/L) in this area, in agreement with previous studies. In light of these results, extended monitoring in Antarctica should be carried out to perform a reliable environmental risk assessment leading to propose recommendations to minimize the anthropic impact.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01404-x) contains supplementary material, which is available to authorized users.