Determination of 5-ethylidene-2-norbornene in industrial emission

A method to measure the emissive concentration of 5-ethylidene-2-norbornene (ENB), a reactive compound used in industrial synthesis of terpolymers, has been developed. The starting points for the development of the presented method are European and Italian reference methods for the quantification of nonreactive volatile organic compounds in industrial emission. In this study, sampling conditions and desorption solvent have been optimized in laboratory and the method was applied in an industrial plant. The laboratory tests showed a good recovery (88–95 %). The concentrations of ENB in industrial emission obtained with the developed method were compared with an online gas chromatography–flame ionization results (R ²?>?0.97). In addition, several manual measurements were performed in parallel, and the resulting %RSD repeatability was <9 %. The developed method provides a discontinuous technique to measure reactive volatile organic compounds using easy-to-use instruments and assures a very good accuracy and precision even with high-humidity gas flows. The method could be extended to other reactive compounds of the same class.     

Performance comparison of commercial TiO2: separation and reuse for bacterial photo-inactivation and emerging pollutants photo-degradation

This research aims to compare the disinfection and degradation effectiveness in water of a commercial suspension of nano-TiO₂ (TiO₂Levenger) with the standard TiO₂Degussa P25. Photo-inactivation and photo-degradation experiments were conducted with UVA-vis light. Concerning the disinfection, the effects of TiO₂ dose (0–2 g/l), water matrix, bacterium type (Gram-positive or Gram-negative), and bacterial regrowth after the photo-treatments were studied for each catalyst. The experimental results show that Enterococcus sp. (Gram-positive) was more resistant to the photo-treatments than Escherichia coli (Gram-negative) for both catalyst; however, postirradiation trends showed similar behavior for both bacteria, favoring regrowth for short-treated cells and decay for longer-treated ones. Caffeine was selected as a model substance of pharmaceuticals and personal care products. In terms of caffeine removal, the effects of TiO₂ dose (0–2 g/l) and water matrix were analyzed. Besides, the comparison between mechanical coagulation-flocculation-decantation and simple decantation of TiO₂ was carried out. The results show that simple decantation allowed the recovery of 97.5% of TiO₂ Degussa P25 and TiO₂ Levenger within 1 day of simple decantation, while applying the proposed mechanical coagulation-flocculation decantation 99.7% of recovery of both catalysts was achieved in 2 hours. Finally, the subsequent reuse of both catalysts was proved with little loss of efficiency in terms of photo-disinfection during the four cycles. Nevertheless, the standard TiO₂ Degussa P25 photo-degradation efficiency of caffeine decreases considerably as compared to commercial suspension of TiO₂ Levenger concerning the reutilization.

     

Fingerprint of polychlorinated biphenyl congeners in samples of human subcutaneous adipose tissue

The concentrations of various PCB congeners as well as the fingerprint of their composition were determined for samples of human subcutaneous adipose tissue. The results indicate the presence of several inducers of MFO activity which are prevalently of PB- and mixed-type inducers. We discuss the possibility that this tissue may represent a “reservoir” which causes a chronic exposure to the organism.     

Occurrence of cyclophosphamide and epirubicin in wastewaters by direct injection analysis–liquid chromatography–high-resolution mass spectrometry

Background, aim, and scope

According to the high incidence of cancer worldwide, the amount of cytostatic drugs administered to patients has increased. These compounds are excreted to wastewaters, and therefore become potential water contaminants. At this stage, very little is known on the presence and elimination of cytostatic compounds in wastewater treatment plants (WWTP). The aim of this study was to develop a liquid chromatography?Chigh-resolution mass spectrometry (LC?COrbitrap?CMS) method for the determination of cyclophosphamide and epirubicin in wastewaters. These compounds represent two outmost used cytostatic agents.

Materials and methods

Extraction and analytical conditions were optimized for cyclophosphamide and epirubicin in wastewater. Both solid-phase extraction using Oasis 200?mg hydrophilic?Clipophilic balanced (HLB) cartridges and direct injection analysis were evaluated. Mass spectral characterization and fragmentation conditions were optimized at 50,000 resolving power (full width at half maximum, m/z 200) to obtain maximum sensitivity and identification performance. Quality parameters (recoveries, limits of detection, and repetitivity) of the methods developed were determined, and best performance was obtained with direct water analysis of the centrifuged wastewater. Finally, this method was applied to determine the presence of cyclophosphamide and epirubicin in wastewaters from a hospital effluent, an urban effluent, and influents and effluents from three WWTP.

Results and discussion

Cyclophosphamide and epirubicin were recovered after 50?mL preconcentration on solid-phase extraction 200?mg Oasis HLB cartridges (87% and 37%, respectively), and no breakthrough was observed by extracting 500?mL of water. Limits of detection were of 0.35 and 2.77?ng/L for cyclophosphamide and epirubicin, respectively. On the other hand, direct injection of water spiked at 1???g/L provided recoveries of 107% for cyclophosphamide and 44% for epirubicin and limits of detection from 3.1 to 85?ng?L^?1, respectively. The analysis of wastewaters using direct injection analysis revealed the presence of cyclophosphamide and epirubicin in WWTP influents and hospital and urban effluents at levels ranging from 5.73 to 24.8???g?L^?1.

Conclusions

The results obtained in this study demonstrate the capability of LC?COrbitrap?CMS for accurate trace analysis of these very polar contaminants. This method permitted to identify cyclophosphamide and epirubicin in wastewaters and influents of WWTP, but no traces were detected in WWTP effluents. The methodology herein developed is sensitive and robust and applicable for screening of a large number of samples since no preconcentration is needed.     

Persistent organochlorine residues in fish and water birds from the Biobio river,Chile

Concentrations of polychlorinated biphenyls (PCBs), DDT and its metabolites, HCH isomers and hexachlorobenzene (HCB) were determined in fish and birds from different locations in the Biobio river basin (central Chile). Samples collected near the mouth of the river contained high concentrations of PCBs, reflecting the massive use of these xenobiotics in the urban and industrial areas of Concepcion and Talcauano. Samples collected in the central part of the basin contained very high concentrations of lindane that coincide with the widespread use of lindane-based pesticides (purified -HCH) in this area. DDT was distributed homogeneously throughout the basin, except at Laguna Icalma, the source of the river in the Andes. Most PCB residues in fish and birds consisted of congeners between penta- and hepta-chlorobiphenyls. In fish, the predominant congeners were the pentachlorobiphenyl 23445 (IUPAC number 118) and the hexachlorobiphenyl 2234455 (PCB-153); in birds 224455 (PCB-180) prevailed.     

Elemental Composition of Urban Aerosol Collected in Florence, Italy

An extensive investigation is in progress aiming at the characterisation of the air particulate composition in Florence. For our investigation, we use the external PIXE-PIGE beam facility of the I.N.F.N. Van de Graaff accelerator at the Physics Department of the Florence University. In order to gather information on both the longer- and shorter-time trends of the aerosol elemental composition, we are analysing both long temporal series (about 1 year) of 24-h Millipore filters collected by the health authorities in 3 different sites, and filters collected simultaneously in two of the above sites for about one month, by two streakers with one-hour resolution, providing size fractionation between particle size smaller than 2.5 µm and from 2.5 µm to 10 µm. The streakers sampling period includes two days during which the Municipality of Florence has banned the circulation of non-catalytic cars, due to the increase of NO₂ above the "recommended safety values". We present here the first obtained results for the sampling site located near a heavy traffic road.     

Costa Rica — Assessing Climate Mitigation Pathways to Support NDC Implementation

Environmental Modeling & Assessment - Costa Rica has set a very ambitious Nationally Determined Contribution (NDC). Despite the low-carbon footprint of its power sector, the goal set in its NDC...     

4-hours resolution data to study PM10 in a “hot spot” area in Europe

Nowadays, high-time resolved aerosol studies are mandatory to better understand atmospheric processes, such as formation, removal, transport, deposition or chemical reactions. This work focuses on PM10 physical and chemical characterisation with high-time resolution: elements (from Na to Pb), ions and OC/EC fractions concentration were determined during two weeks in summer and two in winter 2006 with 4-hours resolution. Further measurements aimed at hourly elemental characterisation of fine and coarse fractions and at the determination of particles number concentration in the 0.25-32 microm size range in 31 bins. The chemical mass closure was carried out in both seasons, enhancing intra-day differences in PM10 composition. In Milan, the highest contribution came from organic matter (34% and 33% in summer and winter, respectively); other important contributors were secondary inorganic compounds (16% and 24% in summer and winter, respectively) and, in summer, crustal matter (14%). Temporal trends showed strong variations in PM10 composition during contiguous time-slots and diurnal variations in different components contribution were identified. Moreover, peculiar phenomena, which would have hardly been detected with 24-hours samplings, were evidenced. Particles removal due to precipitations, aerosol local production and long range transport were studied in detail.     

Soil microarthropod communities from Mediterranean forest ecosystems in Central Italy under different disturbances

The aim of this study is to assess soil quality in Mediterranean forests of Central Italy, from evergreen to deciduous, with different types of management (coppice vs. high forest vs. secondary old growth) and compaction impacts (machinery vs. recreational). Soil quality was evaluated studying soil microarthropod communities and applying a biological index (QBS-ar) based on the concept that the higher is the soil quality, the higher will be the number of microarthropod groups well adapted to the soil habitat. Our results confirm that hardwood soils are characterised by the highest biodiversity level among terrestrial communities and by a well-structured and mature microarthropod community, which is typical of stable ecosystems (QBS value, >200). While silvicultural practices and forest composition do not seem to influence QBS-ar values or microarthropod community structure, the index is very efficient in detecting soil impacts (soil compaction due to logging activities). Several taxa (Protura, Diplura, Coleoptera adults, Pauropoda, Diplopoda, Symphyla, Chilopoda, Diptera larvae and Opiliones) react negatively to soil compaction and degradation (QBS value, <150). In particular, Protura, Diplura, Symphyla and Pauropoda, are taxonomic groups linked to undisturbed soil. This index could also be a useful tool in monitoring soil biodiversity in protected areas and in urban forestry to prevent the negative effects of trampling. QBS-ar is a candidate index for biomonitoring of soil microarthropod biodiversity across the landscape to provide guidance for the sustainable management of renewable resource and nature conservation.