Albatross species demonstrate regional differences in North Pacific marine contamination.

Recent concern about negative effects on human health from elevated organochlorine and mercury concentrations in marine foods has highlighted the need to understand temporal and spatial patterns of marine pollution. Seabirds, long-lived pelagic predators with wide foraging ranges, can be used as indicators of regional contaminant patterns across large temporal and spatial scales. Here we evaluate contaminant levels, carbon and nitrogen stable isotope ratios, and satellite telemetry data from two sympatrically breeding North Pacific albatross species to demonstrate that (1) organochlorine and mercury contaminant levels are significantly higher in the California Current compared to levels in the high-latitude North Pacific and (2) levels of organochlorine contaminants in the North Pacific are increasing over time. Black-footed Albatrosses (Phoebastria nigripes) had 370-460% higher organochlorine (polychlorinated biphenyls [PCBs], dichlorodiphenyltrichloroethanes [DDTs]) and mercury body burdens than a closely related species, the Laysan Albatross (P. immutabilis), primarily due to regional segregation of their North Pacific foraging areas. PCBs (the sum of the individual PCB congeners analyzed) and DDE concentrations in both albatross species were 130-360% higher than concentrations measured a decade ago. Our results demonstrate dramatically high and increasing contaminant concentrations in the eastern North Pacific Ocean, a finding relevant to other marine predators, including humans.     

Mate competition in the velvet swimming crab Necora puber: effects of perceived resource value on male agonistic behaviour

Male velvet swimming crabs [Necora puber (L.)] were observed to engage in long and vigorous agonistic interactions to gain possession of a sexually receptive female. The role of agonistic behaviour in male mate competition in this species was examined by investigating the effect of the perceived presence of sexually receptive females on interactions between males. Exposing male crabs to water conditioned by sexually receptive females resulted in prolonged interactions, with a greater incidence of potentially injurious behaviour than interactions between control crabs, exposed only to sea water. Maleconditioned water also resulted in more offensive behaviour, but these interactions were of shorter duration and not significantly different from sea water controls. Agonistic superiority was strongly correlated with contestant relative size when males were exposed to male-conditioned water or sea water, but not when exposed to female-conditioned water. Overall, the results conformed with the general predictions of game theoretic models in relation to the influence of resource value on agonistic behaviour. Crabs were more persistent and probably incurred greater fitness costs in the perceived presence of a sexually receptive female, when interactions may have been resolved on the basis of factors more closely related to actual fighting ability than the relative body sizes of contestants.     

Design and laboratory testing of a chamber device to measure total flux of volatile organic compounds from the unsaturated zone under natural conditions

To determine if an aquifer contaminated with volatile organic compounds (VOCs) has potential for natural remediation, all natural processes affecting the fate and transport of VOCs in the subsurface must be identified and quantified. This research addresses the quantification of air-phase volatile organic compounds (VOCs) leaving the unsaturated zone soil gas and entering the atmosphere-including the additional flux provided by advective soil-gas movement induced by barometric pumping. A simple and easy-to-use device for measuring VOC flux under natural conditions is presented. The vertical flux chamber (VFC) was designed using numerical simulations and evaluated in the laboratory. Mass-balance numerical simulations based on continuously stirred tank reactor equations (CSTR) provided information on flux measurement performance of several sampling configurations with the final chamber configuration measuring greater than 96% of model-simulated fluxes. A laboratory device was constructed to evaluate the flux chamber under both diffusion-only and advection-plus-diffusion transport conditions. The flux chamber measured an average of 82% of 15 diffusion-only fluxes and an average of 95% of 15 additional advection-plus-diffusion flux experiments. The vertical flux chamber has the capability of providing reliable measurement of VOC flux from the unsaturated zone under both diffusion and advection transport conditions.     

Formation of involatile methylantimony species by Clostridium spp

Trimethylantimony was detected by gas chromatography-mass spectrometry (GC-MS) in the headspace of a soil enrichment culture designed to promote growth of clostridia. Clostridial isolates from the soil enrichment culture were shown to biomethylate inorganic antimony in monseptic culture, using hydride generation-gas chromatographyatomic absorption spectrometry (HG-GC-AAS). GC-MS profiles of headspace gases from soil enrichment cultures shown to generate trimethylantimony, were used to select characterised Clostridium spp for assessment of antimony biomethylation capability. Involatile methylantimony species (up to 21 microg Sb dm(-3)) were detected by HG-GC-AAS in the medium of monoseptic cultures of C. acetobutylicum, C. butyricum and C. cochlearium. The relative quantities of involatile mono-, di- and trimethylantimony species produced over the course of a 28-day cultivation period is consistent with trimethylantimony oxide being a final product of antimony biomethylation by these bacteria, with mono- and dimethylantimony species appearing transiently in the cultures as intermediates of an antimony biomethylation pathway. Clostridia may be the principal agents of antimony biomethylation in methanogenic environments and could give rise to methylated forms of antimony in both the aqueous and gaseous phases.     

The effect of surface-active solutes on water flow and contaminant transport in variably saturated porous media with capillary fringe effects

Organic contaminants that decrease the surface tension of water (surfactants) can have an effect on unsaturated flow through porous media due to the dependence of capillary pressure on surface tension. We used an intermediate-scale 2D flow cell (2.44 x 1.53 x 0.108 m) packed with a fine silica sand to investigate surfactant-induced flow perturbations. Surfactant solution (7% 1-butanol and dye tracer) was applied at a constant rate at a point source located on the soil surface above an unconfined synthetic aquifer with ambient groundwater flow and a capillary fringe of approximately 55 cm. A glass plate allowed for visual flow and transport observations. Thirty instrumentation stations consist of time domain reflectometry probes and tensiometers measured in-situ moisture content and pressure head, respectively. As surfactant solution was applied at the point source, a transient flow perturbation associated with the advance of the surfactant solution was observed. Above the top of the capillary fringe the advance of the surfactant solution caused a visible drainage front that radiated from the point source. Upon reaching the capillary fringe, the drainage front caused a localized depression of the capillary fringe below the point source because the air-entry pressure decreased in proportion to the decrease in surface tension caused by the surfactant. Eventually, a new capillary fringe height was established. The height of the depressed capillary fringe was proportional to height of the initial capillary fringe multiplied by the relative surface tension of the surfactant solution. The horizontal transport of surfactant in the depressed capillary fringe, driven primarily by the ambient groundwater flow, caused the propagation of a wedge-shaped drying front in the downgradient direction. Comparison of dye transport during the surfactant experiment to dye transport in an experiment without surfactant indicated that because surfactant-induced drainage decreased the storage capacity of the vadose zone, the dye breakthrough time to the water table was more than twice as fast when the contaminant solution contained surfactant. The extensive propagation of the drying front and the effect of vadose zone drainage on contaminant breakthrough time suggest the importance of considering surface tension effects on unsaturated flow and transport in systems containing surface-active organic contaminants or systems, where surfactants are used for remediation of the vadose zone or unconfined aquifers.     

Potentially toxic metals in ombrotrophic peat along a 400 km English-Scottish transect

Four samples of ombrotrophic peat were collected from each of 10 upland locations in a transect from the southern Pennines to the Highland Boundary Fault, a total distance of ca. 400 km. Bulk compositions and other properties were determined. Total contents of Al and heavy metals (Ni, Cu, Zn, Cd, Pb) were determined following digestion with hydrofluoric acid, and concentrations of metals extractable with dilute nitric acid were also measured. Supernatants obtained from aqueous extractions of the peat samples were analysed for pH, major cations and anions, dissolved organic carbon and dissolved metals, and concentrations of free metal ions (Al(3+), Ni(2+), etc.) were estimated by applying a chemical speciation model. Both total and HNO(3)-extractable metal concentrations varied along the transect, the highest values being found at locations close to industrial and former mining areas. The HNO(3)-extractable soil metal contents of Ni, Cu and Cd were appreciably lower than lowest-observed-effect-concentrations (LOEC) for toxicity towards microorganisms in acid, organic rich soils. However, the contents of Zn at two locations, and of Pb at five locations exceeded LOECs, suggesting that they may be exerting toxic effects in the peats. Soil solution concentrations of free heavy metal ions (Cu(2+), Zn(2+), Cd(2+), Pb(2+)) were substantially lower than LOECs for toxicity towards vascular plants, whereas concentrations of Al(3+) were near to toxic levels at two locations.     

Models to predict emissions of health-damaging pollutants and global warming contributions of residential fuel/stove combinations in China

Residential energy use in developing countries has traditionally been associated with combustion devices of poor energy efficiency, which have been shown to produce substantial health-damaging pollution, contributing significantly to the global burden of disease, and greenhouse gas (GHG) emissions. Precision of these estimates in China has been hampered by limited data on stove use and fuel consumption in residences. In addition limited information is available on variability of emissions of pollutants from different stove/fuel combinations in typical use, as measurement of emission factors requires measurement of multiple chemical species in complex burn cycle tests. Such measurements are too costly and time consuming for application in conjunction with national surveys. Emissions of most of the major health-damaging pollutants (HDP) and many of the gases that contribute to GHG emissions from cooking stoves are the result of the significant portion of fuel carbon that is diverted to products of incomplete combustion (PIC) as a result of poor combustion efficiencies. The approximately linear increase in emissions of PIC with decreasing combustion efficiencies allows development of linear models to predict emissions of GHG and HDP intrinsically linked to CO2 and PIC production, and ultimately allows the prediction of global warming contributions from residential stove emissions. A comprehensive emissions database of three burn cycles of 23 typical fuel/stove combinations tested in a simulated village house in China has been used to develop models to predict emissions of HDP and global warming commitment (GWC) from cooking stoves in China, that rely on simple survey information on stove and fuel use that may be incorporated into national surveys. Stepwise regression models predicted 66% of the variance in global warming commitment (CO2, CO, CH4, NOx, TNMHC) per 1 MJ delivered energy due to emissions from these stoves if survey information on fuel type was available. Subsequently if stove type is known, stepwise regression models predicted 73% of the variance. Integrated assessment of policies to change stove or fuel type requires that implications for environmental impacts, energy efficiency, global warming and human exposures to HDP emissions can be evaluated. Frequently, this involves measurement of TSP or CO as the major HDPs. Incorporation of this information into models to predict GWC predicted 79% and 78% of the variance respectively. Clearly, however, the complexity of making multiple measurements in conjunction with a national survey would be both expensive and time consuming. Thus, models to predict HDP using simple survey information, and with measurement of either CO/CO2 or TSP/CO2 to predict emission factors for the other HDP have been derived. Stepwise regression models predicted 65% of the variance in emissions of total suspended particulate as grams of carbon (TSPC) per 1 MJ delivered if survey information on fuel and stove type was available and 74% if the CO/CO2 ratio was measured. Similarly stepwise regression models predicted 76% of the variance in COC emissions per MJ delivered with survey information on stove and fuel type and 85% if the TSPC/CO2 ratio was measured. Ultimately, with international agreements on emissions trading frameworks, similar models based on extensive databases of the fate of fuel carbon during combustion from representative household stoves would provide a mechanism for computing greenhouse credits in the residential sector as part of clean development mechanism frameworks and monitoring compliance to control regimes.     

Influence of antecedent water temperatures on standing crop of aSargassum spp.-dominated reef flat in Hawaii

The standing crop of seaweeds was estimated monthly over a 22 mo period from 1971 to 1973 on a reef at Waikiki, Honolulu, Hawaii. Wet and dry standing crops averaged 1.2 and 0.26 kg m^–2, respectively. Approximately 70% of the total biomass was contributed by a single species,Sargassum polyphyllum, and the remainder was contributed by 29 other species. The size of the total standing crop and ofS. polyphyllum in particular was highly correlated with antecedent water temperatures. The highest correlation was with temperatures recorded 3 to 4 wk prior to the estimate of standing crop. Approximately 65% of the variability of the standing crop on the reef was explained by this single variable. Multiple linear-regression analyses did not uncover further significant environmental factors related to theS. polyphyllum standing crop. Temperature may have acted by stimulating the vegetative growth of new plants between the period of minimal abundance in February and maximal abundance in October. The population decline after November relates to the switch to reproductive growth. Total productivity on the reef was estimated to be 16 800 to 19 314 kg dry wt ha^–1 yr^–1, based on the average size of the standing crop and estimates of removal rate and turnover time, respectively.     

Antifouling activity of six nontoxic chemicals on spore attachment of Ulva fasciata

Marine biofouling cause severe damage to all marine technologies. Indiscriminate use of toxic metallic antifouling (AF) chemicals (cuprous oxide and TBT) to control the biofouling in turn greatly affects the flora and fauna of the marine ecosystem. In search of environmentally safe and effective AF agents, six nontoxic AF candidates were studied against the spore attachment of Ulva fasciata. Spore attachment was inhibited at 100 microg of trans-cinnamic acid (TCA) and benzoic acid (BA). Sulfate-coumaric acid (SCA) had no significant effect on the spore attachment. The release rate of BA exhibited a constant release flow. Varied response of U. fasciata spores to AF chemicals and release rate to the surrounding medium are discussed.     

Laboratory and field measurements of aquatic productivity made by a minicomputer employing a dual oxygen electrode system

Rates of change in oxygen concentration can be measured in the laboratory and in natural waters by using a measuring system consisting of two independent oxygen electrodes sending readings to a minicomputer ten times per second. Laboratory and experimental measurements were made under the control of the minicomputer, and differ from those made using standard approaches in two regards. First, the computer removes some of the statistical fluctuation in the data by selectively saving readings only when both electrode readings have changed in the same direction. Second, the computer alters the frequency at which data points are collected during the experiment. A predetermined number of data point pairs consisting of oxygen concentration values and time are collected by the computer. A linear regression analysis is conducted and the values of slope, intercept, sums of squares, and linear correlation coefficient are calculated and printed out. Next, the average of the absolute displacement of the data points about the regression line is calculated. Using the previously acquired value of slope, the computer calculates the length of time required for the change in oxygen concentration to be twice the average dispersion of data points about the regression line. This length of time over which n data points are to be collected is divided by (n-l) to give the waiting period between the samplings in the next round of data acquisition and linear regression. By employing a minicomputer to dynamically alter the experimental sampling frequency and to select the data points to be retained for the subsequent linear regression, it is possible to routinely obtain respiration rate estimates smaller than 20 M (O₂) h^-1 with associated linear correlation coefficients exceeding 0.97. This system has enabled us to measure the rates of oxygen production and consumption in nearshore water samples using light/dark incubations. On 24 March 1981, it was found that following the influex of the kelp Ecklonia radiata (C. Ag.) J. Agardh to nearshore waters off Perth, Western Australia, the rates of oxygen evolution and consumption by the particulate fraction (nominal diam<124 m) increase exponentially for the first 10 h. Subsequently, the rate of change of oxygen in the light decreases to the same negative value as that measured in the dark incubation. This time-varying dark respiration rate, if analyzed as an exponential function, has a doubling time of 8.2 h, a value consistent with bacterial growth rates at the ambient water temperatures (19° to 20°C).