土壤对铜和镉的静态吸附研究

通过静态吸附实验研究了德兴矿区大坞河下游下沽口土壤对铜和镉的吸附特点并采用Freundlich等温吸附方程进行拟合,探讨了pH值变化对铜和镉在土壤样品中分配系数的影响。结果表明：土壤铜和镉的吸附特性均符合Freundlich等温吸附方程,得到的金属铜和镉的Kf值分别为354．08、34．132;随着pH值的升高,铜和镉在土壤中的分配系数逐步增大,随后降低,pH值与分配系数关系曲线为单峰曲线。     

广州轨道交通三号线高速行驶条件下对安全限界的影响研究

给出了轨道交通车辆横向偏移量的计算方法 ,并应用列车 -线路动力耦合模型 ,分析了广州地铁三号线的安全限界变化问题。确定了当前按 80km/h行车速度设计的建筑限界能满足 13 0km/h行车速度的要求 ,限界尺寸不需改动可保证列车运行安全平稳     

2012年上半年我国南方地区极端阴雨天气评价——以湖南省为例

基于湖南省97个地面气象观测站观测资料,根据所选定的阴雨天气评价指标,运用数理统计方法,对2012年上半年湖南省阴雨天气特征及强度进行分析评估,结果表明,阴雨天气阶段性特征显著,属隆冬至初春历史罕见的寡照低温多雨事件与初春至初夏的极端多雨寡照事件的组合。同时根据社会调查数据对阴雨天气的影响展开多方位分析,得出低温阴雨天气不仅对农业造成了重大影响,而且对水利、交通、建筑业等多行业和人们身体健康也有较大影响,以此提出了应对极端天气气候事件的对策建议。     

船舶塑料垃圾热解特性及动力学分析

利用热重分析(TGA)研究船舶塑料垃圾在不同升温速率和不同气氛下的热解特性,并得到了热解动力学参数。结果表明,船舶塑料垃圾的热解过程主要有3个阶段,比一般塑料热解复杂;随着升温速率增大,最大热解速率和最大热解速率温度等热解特性参数也增大,反应变得更剧烈;N2/CO2比为4∶1时,热解反应进行得最完全,固体残留率最少。动力学分析表明,采用3个连续一级反应模型能很好地拟合实验数据;不同的升温速率和气氛比对反应各阶段活化能均有不同程度的影响。     

邻苯二甲酸二丁酯的微生物降解

通过驯化富集培养,从处理石化厂废水的活性污泥中分离出１株邻苯二甲酸酯降解菌ＦＳＩ,研究了邻苯二甲酸酯菌ＦＳＩ对邻苯二甲酸二丁酯的生物降解特性。邻苯二甲酸酯降解菌ＦＳＩ降解最适酸度为ｐＨ６．５～８．０,温度为２０～３５℃。菌株ＦＳＩ对邻苯二甲酸二丁酯的生物降解反应速率遵循一级反应动力学模式。试验结果表明,菌株ＦＳＩ对邻苯二甲本二丁酯具有高效降解作用。     

中国乳腺癌与土壤环境中化学元素的相关性研究

利用土壤元素资料２０６９４４８个数据、乳腺癌死亡调查资料３１３２０例，研究了乳腺癌死亡率与人群生存的土壤环境中64个元素的相关性。结果表明，砷、汞、钡、铊、钕、铀、锆、锑等元素与乳腺癌死亡率有相关性。等级相关系数分别为－０．６８２０（Ｐ〈０．０００５）、０．４５６７（Ｐ〈０．０１）、－０．３７７３（Ｐ〈０．０２５）、－０．３８５２（Ｐ〈０．０２５）、０．３１７９（Ｐ〈０．０５）、－０．４３７７（Ｐ〈     

Short-range transport of contaminants released from e-waste recycling site in South China

The transport behaviors of a suite of contaminants released from electronic waste (e-waste) recycling operations, including polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), and heavy metals, were evaluated by analyzing the contaminant residues in surface soils sampled in the surrounding area of an e-waste recycling site in South China. Concentrations of PBDEs and PCBs in the soil samples ranged from 0.565 to 2908 ng g(-1) dw and from 0.267 to 1891 ng g(-1) dw, respectively, while soil residues were 0.082-2.56, 3.22-287, and 16.3-162 μg g(-1) dw for Cd, Cu, and Pb, respectively. Concentrations of PBDEs and PCBs in soil decreased with increasing distance from the source of pollution, indicating possible PBDE and PCB contamination in the surrounding areas due to the short-range transport of these compounds from the e-waste recycling site. Although no significant difference in the short-range transport potential among PBDE and PCB congeners was observed, reductions in concentrations of the highly-brominated-BDEs and highly-chlorinated-CBs were slightly quicker than those of their less-halogen-substituted counterparts. Conversely, heavy metals showed the lowest transport potential due to their low vapor pressure, and results showed metals would remain near the pollution source instead of diffusing into the surrounding areas. Finally, mass inventories in areas near the e-waste site were 0.920, 0.134, 0.860, 4.68, 757, and 673 tons for BDE209, PBDEs (excluding BDE209), PCBs, Cd, Cu, and Pb, respectively.     

The concentrations, distribution and sources of PAHs in agricultural soils and vegetables from Shunde, Guangdong, China

The concentrations, distribution and sources of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in 30 agricultural soil and 16 vegetable samples collected from subtropical Shunde area, an important manufacturing center in China. The total PAHs ranged from 33.7 to 350 μg/kg in soils, and 82 to 1,258 μg/kg in vegetables. The most abundant individual PAHs are phenanthrene, fluoranthene, chrysene, pyrene and benzo(b)fluoranthene for soil samples, and anthracene, naphthalene, phenanthrene, pyrene and chrysene for vegetable samples. Average vegetable–soil ratios of total PAHs were 2.20 for leafy vegetables and 1.27 for fruity vegetables. Total PAHs in vegetable samples are not significantly correlated to those in corresponding soil samples. Principal component analyses were conducted to distinguish samples on basis of their distribution in each town, soil type and vegetable specie. Relatively abundant soil PAHs were found in town Jun’an, Beijiao, Chencun, Lecong and Ronggui, while abundant vegetable PAHs were observed in town Jun’an, Lecong, Xingtan, Daliang and Chenchun. The highest level of total PAHs were found in vegetable soil, followed by pond sediment and “stacked soil” on pond banks. The PAHs contents in leafy vegetables are higher than those in fruity vegetables. Some PAH compound ratios suggest the PAHs derived from incomplete combustion of petroleum, coal and refuse from power generation and ceramic manufacturing, and paint spraying on furniture, as well as sewage irrigation from textile industries. Soil PAHs contents have significant logarithmic correlation with total organic carbon, which demonstrates the importance of soil organic matter as sorbent to prevent losses of PAHs.     

城市污水处理厂化学除磷工艺精确控制技术研究进展

现今自动控制系统已经广泛应用于城市污水处理厂。总结归纳了污水处理厂的化学除磷工艺,重点对加药过程控制的类型,包括手动控制系统、自动控制系统、智能控制系统进行较为详细的论述。最后针对传统污水处理厂存在的问题和不足,提出研究污水处理厂化学除磷工艺精确控制系统技术的必要性。     

An integrated fuzzy-stochastic modeling approach for risk assessment of groundwater contamination

An integrated fuzzy-stochastic risk assessment (IFSRA) approach was developed in this study to systematically quantify both probabilistic and fuzzy uncertainties associated with site conditions, environmental guidelines, and health impact criteria. The contaminant concentrations in groundwater predicted from a numerical model were associated with probabilistic uncertainties due to the randomness in modeling input parameters, while the consequences of contaminant concentrations violating relevant environmental quality guidelines and health evaluation criteria were linked with fuzzy uncertainties. The contaminant of interest in this study was xylene. The environmental quality guideline was divided into three different strictness categories: "loose", "medium" and "strict". The environmental-guideline-based risk (ER) and health risk (HR) due to xylene ingestion were systematically examined to obtain the general risk levels through a fuzzy rule base. The ER and HR risk levels were divided into five categories of "low", "low-to-medium", "medium", "medium-to-high" and "high", respectively. The general risk levels included six categories ranging from "low" to "very high". The fuzzy membership functions of the related fuzzy events and the fuzzy rule base were established based on a questionnaire survey. Thus the IFSRA integrated fuzzy logic, expert involvement, and stochastic simulation within a general framework. The robustness of the modeling processes was enhanced through the effective reflection of the two types of uncertainties as compared with the conventional risk assessment approaches. The developed IFSRA was applied to a petroleum-contaminated groundwater system in western Canada. Three scenarios with different environmental quality guidelines were analyzed, and reasonable results were obtained. The risk assessment approach developed in this study offers a unique tool for systematically quantifying various uncertainties in contaminated site management, and it also provides more realistic support for remediation-related decisions.