Comparison of ALAD activities of Citrobacter and Pseudomonas strains and their usage as biomarker for Pb contamination

Delta-aminolevulinate dehydratase (ALAD) activity has been used in prokaryotes and eukaryotes as a biomarker for environmental lead (Pb) exposure and toxicity. Microorganisms are sensitive indicators of toxicity at the fundamental level of ecological organization, but bacterial biomarker studies are focused on the Pseudomonas strains in Group I and E coli. The objectives of the present work were to determine if Burkholderia gladioli belonging to group II, due to its 16SrRNA similarity, can be used as biomarker in metal contamination and compare its possible usage with Pseudomonas aeruginosa and Citrobacter freundii (previously known as Esherichia freundii) and Bacterium freundii which are classified in Group I. In this study, ALAD activity in an environmental strains of Burkholderia gladioli, Pseudomonas aeruginosa, Citrobacter freundii were investigated to evaluate potential inhibition by Pb and other toxic metals. When the ALAD activity of Burkholderia gladioli was tested, Co and Pb decreased activity by 27 and 71%, respectively. In addition to these findings, Zn increased the activity up to 26%. These effects were found to be statistically meaningful (p < 0.05). It was determined that the increase of lead concentration inhibites the ALAD activity at each of the three strains. There was a statistically significant dose–response relationship between ALAD activity in cells of Burkholderia gladioli and Pb (Pearson correlation coefficent = −0.665; r ² = 0.665, and p < 0.001). The strongest ALAD inhibition which was measured was 90% at Burkholderia gladioli when protein extracts were incubated with 750 μM of Pb. The relationship between Pb and ALAD activity was statistically described by [ALAD Activity] = 0.476−0.000597 × [Pb]. According to the obtained results, we suggest that the ALAD of Burkholderia gladioli can be used as a biomarker for lead contamination in the environment.     

Multi-stand Forest Management under a Climatic Risk: Do Time and Risk Preferences Matter?

We propose a stochastic dynamic programming framework to model the management of a multi-stand forest under climate risk (strong wind occurrence). The preferences of the forest-owner are specified by a non-expected utility in order to separately analyze intertemporal substitution and risk aversion effects. A numerical method is developed to characterize the optimal forest management policies and the optimal consumption-saving strategy. The stochastic dynamic programming framework is applied to a non-industrial private forest-owner located in North-East of France. We show that the optimal decisions both depend upon risk and time preferences. The authors would like to thank participants at the international conference on Economics of Sustainable Forest Management in Toronto, at the PARIS 1 seminar on Environmental and Natural Resource Economics, at the 2004 Applied Microeconomics Conference in Lille and at the 13th annual conference of the European Association of Environmental and Resource Economists at Budapest.     

Characteristics of dwellings contaminated by moulds

Dwellings showing a presence of moulds are considered to be unhealthy both by the inhabitants and by sanitary authorities. Although the thresholds of pathogenicity have not yet been established, the toxic, allergic and infectious risk of indoor moulds is better understood today. A study on indoor fungi contamination for 128 dwellings was done between October and May in France. It concerned 69 dwellings, the occupants of which either complained to the sanitary authorities about problems of moulds and humidity or consulted a doctor who related their symptoms to housing conditions. Fifty-nine other dwellings, the occupants of which were healthy, constituted the control group. We present the statistical analysis of questionnaires, which aimed to clarify characteristics of dwellings associated with high concentrations of airborne moulds. Air samples were taken with an impactor in 500 rooms. On visiting dwellings, investigators obtained answers to 25 questions concerning characteristics of inhabitants and living space, as well as the presence of mould indicators. Indoor and outdoor temperature and indoor relative humidity of air measurements were taken. The total concentration of fungi in the air was significantly higher in ground floor apartments versus those on other floors (p = 0.047), in small and highly occupied dwellings (p = 0.03 and 0.003), in dwellings with electric heating (p = 0.04), without a ventilation system (p = 0.003), with water damage (p = 0.003), and finally, in those where the investigator noted an odour of moisture or visible moulds (p < 0.001). The efficacy of the latter criteria in the evaluation of insalubrity is discussed.     

Spatial variation in soil carbon in the organic layer of managed boreal forest soil—implications for sampling design

We studied within-site spatial variation of the carbon stock in the organic layer of boreal forest soil. A total of 1,006 soil samples were taken in ten forest stands (five Scots pine stands and five Norway spruce stands). Our results indicate that the spatial autocorrelation disappears at a distance of 75-225 cm. This spatial autocorrelation should be taken into account in the sampling design by locating the sampling points at adequate intervals. With a sample size of over 20-30 samples per site, additional soil samples do not notably improve the precision of the site mean estimate. An adequate sample size is dependent on the purpose of sampling and on the site-specific soil variation. Our results on the dependence between sample size and precision of the mean estimates can be applied in designing efficient soil monitoring in boreal coniferous forests.     

The impact of the tunnel exhausts in terms of heavy metals to the surrounding ecosystem

Samples of soil, plants, and lichens were analysed for heavy metal content (Cd, Cr, Cu, Ni, Pb, and Zn) in relation to different distances from the tunnel ventilation systems in order to evaluate the environmental pollution caused by car exhausts pollution from the Tauerntunnel and the Katschbergtunnel (Austria). Results show that the extent of heavy metal pollution is related to the type of tunnel ventilation system. The vertical ventilation system which ends in an exhaust air tower in the alpine pasture of Mosermandl 1,900 m above sea level contaminates soils and plants up to a distance of 750 m from the exhaust source. The dispersion of metals in front of the horizontal ventilation systems, which are located next to the tunnel portals, exhibits a rapid decrease with distance. Lichen transplants placed in front of the horizontal ventilation systems show very high metal accumulation, which gradually declines with the distance from the emitter source, therefore the lichen species Pseudevernia furfuracea can be used as a very efficient biomonitor for monitoring heavy metal pollution caused by tunnel exhausts over time. Data from former years (1986, 1988, 1990 and 1992) and from this present research suggest that the contamination of heavy metals at Mosermandl has decreased slightly in soil samples, except for Cu, but increased in plant samples, whereas a significant increase of Pb was observed.     

Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.     

Techniques for the stabilization and assessment of treated copper-, chromium-, and arsenic-contaminated soil

Remediation mainly based on excavation and burial of the contaminated soil is impractical with regard to the large numbers of sites identified as being in need of remediation. Therefore, alternative methods are needed for brownfield remediation. This study was conducted to assess a chemical stabilization procedure of CCA-contaminated soil using iron (Fe)-containing blaster sand (BS) or oxygen-scarfing granulate (OSG). The stabilization technique was assessed with regard to the feasibility of mixing ameliorants at an industrial scale and the efficiency of the stabilization under different redox conditions. The stability was investigated under natural conditions in 1-m3 lysimeters in a field experiment, and the effect of redox conditions was assessed in a laboratory experiment (10 L). The treatments with high additions of ameliorant (8% and 17%) were more successful in both the laboratory and field experiments, even though there was enough Fe on a stochiometric basis even at the lowest addition rates (0.1% and 1%). The particle size of the Fe and the mixing influenced the stabilization efficiency. The development of anaerobic conditions, simulated by water saturation, increases the fraction of arsenic (AsIII) and, consequently, As mobility. The use of high concentrations of OSG under aerobic conditions increased the concentrations of nickel (Ni) and copper (Cu) in the pore water. However, under anaerobic conditions, it decreased the As leaching compared with the untreated soil, and Ni and Cu leaching was not critical. The final destination of the treated soil should govern the amendment choice, that is, an OSG concentration of approximately 10% may be suitable if the soil is to be landfilled under anaerobic conditions. Alternatively, the soil mixed with 1% BS could be kept under aerobic conditions in a landfill cover or in situ at a brownfield site. In addition, the treatment with BS appeared to produce better effects in the long term than treatment with OSG.     

Integrated catalytic wet air oxidation and aerobic biological treatment in a municipal WWTP of a high-strength o-cresol wastewater

This study examines the feasibility of coupling a Catalytic Wet Air Oxidation (CWAO), with activated carbon (AC) as catalyst, and an aerobic biological treatment to treat a high-strength o-cresol wastewater. Two goals are pursued: (a) To determine the effect of the main AC/CWAO intermediates on the activated sludge of a municipal WasteWater Treatment Plant (WWTP) and (b) To demonstrate the feasibility of coupling the AC/CWAO effluent as a part of the influent of a municipal WWTP. In a previous study, a high-strength o-cresol wastewater was treated by AC/CWAO aiming to establish the distribution of intermediates and the biodegradability enhancement. In this work, the biodegradability, toxicity and inhibition of the most relevant intermediates detected in the AC/CWAO effluent were determined by respirometry. Also, the results of a pilot scale municipal WWTP study for an integrated AC/CWAO-aerobic biological treatment of this effluent are presented. The biodegradation parameters (i.e. maximum oxygen uptake rate and oxygen consumption) of main AC/CWAO intermediates allowed the classification of the intermediates into readily biodegradable, inert or toxic/inhibitory compounds. This detailed study, allowed to understand the biodegradability enhancement exhibited by an AC/CWAO effluent and to achieve a successful strategy for coupling the AC/CWAO step with an aerobic biological treatment for a high-strength o-cresol wastewater. Using 30%, as COD, of AC/CWAO effluent in the inlet to the pilot scale WWTP, the integrated AC/CWAO-biological treatment achieved a 98% of total COD removal and, particularly, a 91% of AC/CWAO effluent COD removal without any undesirable effect on the biomass.     

Persistent organic pollutants in atmospheric deposition and biomonitoring with Tillandsia usneoides (L.) in an industrialized area in Rio de Janeiro state, southeast Brazil--Part II: PCB and PAH

Monitoring of immission of persistent organic pollutants in the industrialized area of Volta Redonda (V.R.) and in the National Park of Itatiaia (PNI) in southeast Brazil was performed using an endemic bromeliad species as biomonitor and measuring bulk deposition rates of polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH). For the sum of PCB, overall deposition rates were between 17 and 314 ng/(m2 day) in winter and between 43 and 81 ng/(m2 day) in summer, respectively. Deposition rates of dioxin-like PCBs ranged from 0.14 to 2.8 pg WHO-TEQ/(m2 day) in winter and from 0.90 to 4.3 pg WHO-TEQ/(m2 day) in summer. PCB deposition rates (total PCB and WHO-TEQ) were in the same range in winter in V.R. and PNI. In summer, contamination levels in V.R. were 6-10-folds higher than in PNI. PCB concentrations in biomonitor samples from V.R. and PNI were in the same range in summer and in winter. Concentrations of total PCB ranged from 14 to 95 microg/kg dry matter (d.m.) in winter and from 18 to 27 microg/kg d.m. in summer, respectively. The TEQ values were between 1.7 and 4.1 ng WHO-TEQ/kg d.m. in winter and between 1.9 and 2.9 ng WHO-TEQ/kg d.m. in summer. PCB concentrations of di-ortho PCB but not of non-ortho PCB were a factor of 2-4 lower in summer in both areas. PCB congener profiles resembled those from technical formulations. The profiles shifted to the higher chlorinated congeners in summer, probable due to revolatilisation of the lighter components at higher temperatures. PCB profiles in biomonitor resembled those from deposition samples and the shift to the heavier congeners in summer was even more pronounced. PAH deposition rates were in a similar range in both areas (131-2415 ng/(m2 day)). PAH levels in biomonitor samples from V.R. were about one order of magnitude higher than in samples from PNI indicating the impact of local sources. PAH profiles revealed stationary thermal processes as main source of contamination in V.R. whereas in PNI, biomass burning seems to be the main contamination source.     

Exemplifying whole-plant ozone uptake in adult forest trees of contrasting species and site conditions

Whole-tree O3 uptake was exemplified for Picea abies, Fagus sylvatica and Larix decidua in stands at high and low altitude and contrasting water availability through sap flow measurement in tree trunks, intrinsically accounting for drought and boundary layer effects on O3 flux. O3 uptake of evergreen spruce per unit foliage area was enhanced by 100% at high relative to low elevation, whereas deciduous beech and larch showed similar uptake regardless of altitude. The responsiveness of the canopy conductance to water vapor and, as a consequence, O3 uptake to soil moisture and air humidity did not differ between species. Unifying findings at the whole-tree level will promote cause-effect based O3 risk assessment and modeling.