Value of information analysis in remedial investigations

Site investigations of contaminated land are associated with high costs. From a societal perspective, just enough economic resources should be spent on investigations so that society's limited resources can be used optimally. The solution is to design investigation programs that are cost effective, which can be performed using value of information analysis (VOIA). The principle of VOIA is to compare the benefit at the present state of knowledge with the benefit that is expected after an investigation has been performed. A framework for VOIA of site investigations is presented based on Bayesian risk-cost-benefit decision analysis. The result is an estimate of the value of an investigation program and, for specific problems, the optimal number of samples. The main strength of the methodology is that it promotes clear thinking and compels the decision maker to reflect on issues that otherwise would be ignored. The main weakness is the complexity of VOIA models.     

The use of respirometric measurements to determine the toxicity of textile dyes in aqueous solution and after oxidative decolourisation processes

Selected results from the degradation of reactive-dye hydrolysates after UV irradiation, ozonation and sodium peroxodisulphate (NaPS) treatment are presented. Reactive dyes with representative chromophores and anchor groups were chosen for the research project. Different stages of oxidative decolourisation were examined and determined by water parameters for biological degradation (BOD). The paper focuses on toxicity tests with Pseudomonas putida to consider whether the oxidative treatments result in products with a risk for the environment. Tests were performed with the AQUALYTIC^® Sensomat System, which measures biological oxygen demand (BOD). It was determined that the chosen oxidative treatments had as a rule no bearing on respiration of P. putida. Experiments with hydrolysates after short-term UV irradiation resulted in a slightly increased but not long-lasting toxicity in comparison with treatments with ozone or NaPS. Toxic effects were found in tests with hydrolysates of metalliferous dyes. During oxidative treatment, metals were liberated from the chromophores. This did cause complete inhibition of respiration of P. putida. Dye Blue E, a member of a dye class with chlorotriazine anchor groups, was itself found to be toxic, caused by the reactivity of the anchor group. The hydrolysate is only of minor toxicity.     

Single and double metallothionein knockout in the nematode C. elegans reveals cadmium dependent and independent toxic effects on life history traits

The genome of the nematode Caenorhabditis elegans contains two metallothionein genes, both involved in metal homeostasis and/or detoxification. Single metallothionein knockout mutants have been created and now, for the first time, a double mutant has been isolated. Life history studies in the presence or absence of cadmium showed that all metallothionein mutants are viable. Although cadmium did not influence longevity, a dose dependent reduction in total brood size and volumetric growth was observed in wild type animals, which was magnified in single knockouts and further exacerbated in the double knockout. However, the metallothionein deletion caused two effects that are independent of cadmium exposure, namely all knockout strains displayed a reduced total brood size and the deletion of both metallothionein loci caused a significant reduction in volumetric growth. In summary, metallothionein is undoubtedly an important player in cadmium detoxification, but evidently also an important factor in cadmium independent pathways.     

Assessment of in situ biodegradation of monochlorobenzene in contaminated groundwater treated in a constructed wetland

The degradation of monochlorobenzene (MCB) was assessed in a constructed wetland treating MCB contaminated groundwater using a detailed geochemical characterisation, stable isotope composition analysis and in situ microcosm experiments. A correlation between ferrous iron mobilisation, decreasing MCB concentration and enrichment in carbon isotope composition was visible at increasing distance from the inflow point, indicating biodegradation of MCB in the wetland. Additionally, in situ microcosm systems loaded with 13C-labelled MCB were deployed for the first time in sediments to investigate the biotransformation of MCB. Incorporation of 13C-labelled carbon derived from the MCB into bacterial fatty acids substantiated in situ degradation of MCB. The detection of 13C-labelled benzene indicated reductive dehalogenation of MCB. This integrated approach indicated the natural attenuation of the MCB in a wetland system. Further investigations are required to document and optimise the in situ biodegradation of MCB in constructed and natural wetland systems treating contaminated groundwater.     

Assessment of global bioenergy potentials

So far, various studies assessed global biomass potentials and came up with widely varying results. Existing potential estimates range from 0 EJ/a up to more than 1,550 EJ/a which corresponds to about three times the current global primary energy consumption. This paper provides an overview of the available research on bioenergy potentials and reviews the different assessments qualitative way with the objective to interpret previous research in an integrated way. In the context of this paper we understand bioenergy as energy from biomass sources including energy crops, residues, byproducts and wastes from agriculture, forestry, food production and waste management. In this review special attention was paid to the difference between residue and energy potentials, land availability estimates, and the geographical resolution of existing potential estimates. The majority of studies concentrate on energy crop potentials retrieved from surplus agricultural land and only few publications assess global potentials separated by different world regions. It results that land allocated to the exclusive production of energy crops varies from 0 to 7,000 ha, depending on land category and scenario assumptions. Only a small number of available potential assessments consider residue potentials as well as energy crop potentials from degraded land. Future energy crop potentials are assumed to vary in the mean from 200 to 600 EJ/yr. In contrast residue potentials are expected to contribute between 62 and 325 EJ/yr. The highest potentials are assigned to Asia, Africa and South America while Europe, North America and the Pacific region contribute minor parts to the global potential.     

Determination of total chlorine and bromine in solid wastes by sintering and inductively coupled plasma-sector field mass spectrometry

A sample preparation method based on sintering, followed by analysis by inductively coupled plasma-sector field mass spectrometry (ICP-SFMS) for the simultaneous determination of chloride and bromide in diverse and mixed solid wastes, has been evaluated. Samples and reference materials of known composition were mixed with a sintering agent containing Na₂CO₃ and ZnO and placed in an oven at 560 °C for 1 h. After cooling, the residues were leached with water prior to a cation-exchange assisted clean-up. Alternatively, a simple microwave-assisted digestion using only nitric acid was applied for comparison. Thereafter the samples were prepared for quantitative analysis by ICP-SFMS. The sintering method was evaluated by analysis of certified reference materials (CRMs) and by comparison with US EPA Method 5050 and ion chromatography with good agreement. Median RSDs for the sintering method were determined to 10% for both chlorine and bromine, and median recovery to 96% and 97%, respectively. Limits of detection (LODs) were 200 mg/kg for chlorine and 20 mg/kg for bromine. It was concluded that the sintering method is suitable for chlorine and bromine determination in several matrices like sewage sludge, plastics, and edible waste, as well as for waste mixtures. The sintering method was also applied for determination of other elements present in anionic forms, such as sulfur, arsenic, selenium and iodine.     

Comparison of oxygen-transfer measurement methods under process conditions.

The objective of this paper is to compare the following four methods of measuring oxygen transfer in wastewater treatment plants under process conditions: the offgas, hydrogen peroxide (H2O2), reaeration, and in situ oxygen uptake rate (OUR) methods. Comparative tests were performed under controlled conditions in a pilot column and in six full-scale oxidation ditches equipped with fine-bubble diffusers and slow-speed mixers. The offgas and H2O2 methods give similar results (differences between the oxygen-transfer coefficients under field conditions [k(L)a(f)] from each method lower than 10%). The reaeration procedure gives more random results (differences from -5 to -43% compared with values obtained using the offgas method). The in situ OUR method, in the presence of a horizontal flow of mixed liquor, leads to an estimate of k(L)a(f) to within 15% of the offgas value.     

Individual changes in human EEG caused by 450 MHz microwave modulated at 40 and 70 Hz

This study was aimed to investigate the changes in the human electroencephalographic (EEG) signal caused by modulated low-level microwaves. The 450 MHz microwave exposure modulated at 40 Hz and 70 Hz frequencies was applied to a group of 15 volunteers. The field power density at the scalp was 0.16 mW/cm². Ten cycles of the exposure (1 min on and 1 min off) at both modulation frequencies were applied. Analysis of the EEG signal was performed using three different methods: nonlinear method of scaling analysis for length distribution of low variability periods (LDLVP), relative changes in EEG energy (S-parameter) and beta ratio (H-parameter). The analysis revealed significant changes caused by microwave for the whole group (H-parameter method). The exposure caused increase of the EEG beta power (S-parameter method). Statistically significant changes in EEG were detected for four subjects (26.7%) at 40 Hz modulation frequency (LDLVP method).