Recycling of tailings from Korea Molybdenum Corporation as admixture for high-fluidity concrete

The main objective of this study is to develop an eco-friendly and a large recycling technique of flotation Tailings from korea (TK) from metal mines as construction materials such as admixtures for high-fluidity concrete (HFC). TK used in this study was obtained from the Korea Molybdenum Corporation in operation. TK was used as the alternative material to adjust flowability and viscosity of HFC in the form of powder agent which enables adjustment of concrete compressive strength. In this study, we have performed concrete rheological tests and concrete flowability tests to obtain the quality characteristics of TK for using as the admixture in producing HFC. The results indicated that the adequate mix ratio of cement to TK should be 8:2 (vol%). It is more effective to use the TK as admixture to control flowability, viscosity and strength of HFC than the normal concrete. It was found that TK could be recycled construction materials in bulk such as admixture for HFC, in terms of the economic and eco-friendly aspects.     

Estimation of the contributions of long range transported aerosol in East Asia to carbonaceous aerosol and PM concentrations in Seoul, Korea using highly time resolved measurements: a PSCF model approach

The contributions of long range transported aerosol in East Asia to carbonaceous aerosol and particulate matter (PM) concentrations in Seoul, Korea were estimated with potential source contribution function (PSCF) calculations. Carbonaceous aerosol (organic carbon (OC) and elemental carbon (EC)), PM(2.5), and PM(10) concentrations were measured from April 2007 to March 2008 in Seoul, Korea. The PSCF and concentration weighted trajectory (CWT) receptor models were used to identify the spatial source distributions of OC, EC, PM(2.5), and coarse particles. Heavily industrialized areas in Northeast China such as Harbin and Changchun and East China including the Pearl River Delta region, the Yangtze River Delta region, and the Beijing-Tianjin region were identified as high OC, EC and PM(2.5) source areas. The conditional PSCF analysis was introduced so as to distinguish the influence of aerosol transported from heavily polluted source areas on a receptor site from that transported from relatively clean areas. The source contributions estimated using the conditional PSCF analysis account for not only the aerosol concentrations of long range transported aerosols but also the number of transport days effective on the measurement site. Based on the proposed algorithm, the condition of airmass pathways was classified into two types: one condition where airmass passed over the source region (PS) and another condition where airmass did not pass over the source region (NPS). For most of the seasons during the measurement period, 249.5-366.2% higher OC, EC, PM(2.5), and coarse particle concentrations were observed at the measurement site under PS conditions than under NPS conditions. Seasonal variations in the concentrations of OC, EC, PM(2.5), and coarse particles under PS, NPS, and background aerosol conditions were quantified. The contributions of long range transported aerosols on the OC, EC, PM(2.5), and coarse particle concentrations during several Asian dust events were also estimated. We also investigated the performance of the PSCF results obtained from combining highly time resolved measurement data and backward trajectory calculations via comparison with those from data in low resolutions. Reduced tailing effects and the larger coverage over the area of interest were observed in the PSCF results obtained from using the highly time resolved data and trajectories.     

Development of PAOT Tool Kit for Work Improvements in Clinical Nursing

The aim of this study was to develop an action checklist for educational training of clinical nurses. The study used qualitative and quantitative methods. Questionnaire items were extracted through in-depth interviews and a questionnaire survey. PASW version 19 and AMOS version 19 were used for data analyses. Reliability and validity were tested with both exploratory and confirmative factor analysis. The levels of the indicators related to goodness-of-fit were acceptable. Thus, a model kit of work improvements in clinical nursing was developed. It comprises 5 domains (16 action points): health promotion (5 action points), work management (3 action points), ergonomic work methods (3 action points), managerial policies and mutual support among staff members (3 action points), and welfare in the work area (2 action points).     

Measurement of flow speed in the channels of novel threadlike structures on the surfaces of mammalian organs

There have been several reports on novel threadlike structures (NTSs) on the surfaces of the internal organs of rats and rabbits since their first observation by Bonghan Kim in 1963. To confirm this novel circulatory function, it is necessary to observe the flow of liquid through the NTS as well as the structurally corroborating channels in the NTS. In this article, we report on the measurement of the flow speed of Alcian blue solution in the NTSs on the organ surfaces of rabbits, and we present electron microscopic images depicting the cribrous cross-section with channels. The speed was measured as 0.3 ± 0.1 mm/s, and the flow distance was up to 12 cm. The flow was unidirectional, and the phase contrast microscopic images showed that the NTSs were strongly stained with Alcian blue. The ultrastructure of the NTSs revealed by cryo-scanning electron microscopy and high-voltage electron microscopy showed that (1) there were cell-like bodies and globular clumps of matter inside the sinus of the channel with thin strands of segregated zones which is a microscopic evidence of the liquid flow, (2) the sinuses have wall structures surrounded with extracellular matrices of collagenous fibers, and (3) there exists a cribriform structure of sinuses. To understand the mechanism for the circulation, a quantitative analysis of the flow speed has been undertaken applying a simplified windkessel model. In this analysis, it was shown that the liquid flow through the NTSs could be due to peristaltic motion of the NTS itself. Baeckkyoung Sung and Min Su Kim contributed equally to this work.     

Vaporization reduction characteristics of aqueous ammonia solutions by the addition of ethylene glycol, glycerol and glycine to the CO2 absorption process

Aqueous ammonia (NH₃) solution can be used as an alternative absorption for the control of CO₂ emitted from flue gases due to its high absorption capacity, fast absorption rate and low corrosion problem. The emission of CO₂ from iron and steel plants requires much attention, as they are higher than those emitted from power plants at a single point source. In the present work, low concentration ammonia liquor, 9 wt.%, was used with various additives to obtain the kinetic properties using the blast furnace gas model. Although a solution with a high ammonia concentration enables high CO₂ absorption efficiency, ammonium ions are lost as ammonia vapor, resulting in reduced CO₂ absorption due to the lower concentration of the ammonia absorbent. To decrease the vaporization of ammonia, ethylene glycol, glycerol and glycine, which contain more than one hydroxyl radical, were chosen. The experiments were conducted at 313 K similar to the CO₂ absorption conditions for the blast furnace gas model.     

Fate and degradation of the chemical warfare agent soman on sands

Soman is one of the most toxic nerve agents of the known chemical warfare agents. There is actually few knowledge on the behavior of soman in the event of an environmental contamination. It is in particular unknown whether soman remains on a given surface, evaporates into air, or degrades. Here, we studied the evaporation of soman deposited on silica sand using a laboratory-sized wind tunnel, thermal desorption, and gas chromatography. We also investigated the degradation of soman on silica sand by ³¹phosphorus solid state magic angle spinning nuclear magnetic resonance and gas chromatography–mass spectrometry. Results show that a drop of soman on silica sand spreads laterally while evaporating. The maximum vapor concentration was found when the spreading of the soman drop was maximum on the surface. Simultaneously, soman was absorbed gradually into the pore of sand and degraded to O-pinacolyl-methylphosphonic acid following a pseudo-first-order rate reaction over weeks. To our best knowledge, this is the first report on the fate of soman in a sandy environment.     

Positive relationships between phenol oxidase activity and extractable phenolics in estuarine soils

Decomposition of recalcitrant materials such as phenolics is known to play a pivotal role in organic matter decomposition and nutrient cycling in estuaries. The specific goals of this study were to determine temporal and spatial variations of phenol oxidase and phenolics in estuarine soils, and to elucidate controlling factors for phenol oxidase activity. To achieve these goals, phenol oxidase activity and phenolic content were measured in soils developed along the side of an estuary in the Han River, Korea. Soil samples were collected in three locations with different vegetation: mud flats, Zizania-dominated soils, and Salix-dominated soils. Monthly measurements were also made in a Zizania-dominated site over a year period. Phenol oxidase activity varied between 0.00 and 0.28 diqc min^?1 g^?1, whilst phenolic content ranged from 0.0–10.5 μg g^?1. A correlation analysis revealed that phenol oxidase activity exhibited positive correlations with phenolic content in both seasonal and spatial data. The same relationship was found when the data were analysed separately for each site. Unlike peatlands or upland forest soils where negative correlations were often found between phenol oxidase activity and phenolics, substrate induction appears to account for the positive correlation in the present study.     

Numerical and field investigation of enhanced in situ denitrification in a shallow-zone well-to-well recirculation system

This study investigated efficiency of in situ enhanced biological denitrification of nitrate-contaminated groundwater which employs a well-to-well circulation in a shallow zone where oxygen might give an adverse affect on the denitrification processes. The numerical model developed for the efficiency test included sequential aerobic and nitrate-based respiration, multi-Monod kinetics of reactive components, growth and decay of biomass, and denitrification inhibition associated with the presence of oxygen. Moreover, reaction kinetics for production of toxic intermediates such as nitrite and nitrous oxide were also included in the model. The developed model was applied to the analysis of enhanced in situ denitrification using an injection/extraction well pair. To evaluate the relative remediation effectiveness, comparisons were made between a continuous fumarate injection test (CFIT) system and a pulsed fumarate injection test (PFIT) system, where both systems had the same total fumarate mass injected into the aquifer. The PFIT system was preferable to the CFIT system because of the high possibility of occurrence of clogging in the latter case at the injection well, with no other significant advantages found in either the CFIT or the PFIT system. Accordingly, this developed numerical model is useful to predict and evaluate an in situ bioremediation by denitrification in aquifers.