Effects of Heating Season on Residential Indoor and Outdoor Polycyclic Aromatic Hydrocarbons, Black Carbon, and Particulate Matter in an Urban Birth Cohort

Exposure to air pollutants has been associated with adverse health effects. However, analyses of the effects of season and ambient parameters such as ozone have not been fully conducted. Residential indoor and outdoor air levels of polycyclic aromatic hydrocarbons (PAH), black carbon (measured as absorption coefficient [Abs]), and fine particulate matter <2.5 μm (PM)(2.5) were measured over two-weeks in a cohort of 5-6 year old children (n=334) living in New York City's Northern Manhattan and the Bronx between October 2005 and April 2010. The objectives were to: 1) characterize seasonal changes in indoor and outdoor levels and indoor/outdoor (I/O) ratios of PAH (gas + particulate phase; dichotomized into Σ(8)PAH(semivolatile) (MW 178-206), and Σ(8)PAH(nonvolatile) (MW 228-278)), Abs, and PM(2.5); and 2) assess the relationship between PAH and ozone. Results showed that heating compared to nonheating season was associated with greater Σ(8)PAH(nonvolatile) (p<0.001) and Abs (p<0.05), and lower levels of Σ(8)PAH(semivolatile) (p<0.001). In addition, the heating season was associated with lower I/O ratios of Σ(8)PAH(nonvolatile) and higher I/O ratios of Σ(8)PAH(semivolatile) (p<0.001) compared to the nonheating season. In outdoor air, Σ(8)PAH(nonvolatile) was correlated negatively with community-wide ozone concentration (p<0.001). Seasonal changes in emission sources, air exchanges, meteorological conditions and photochemical/chemical degradation reactions are discussed in relationship to the observed seasonal trends.     

Levels and patterns of polycyclic aromatic hydrocarbons (PAHs) in soils after forest fires in South Korea

Introduction  

To investigate the influence of biomass burning on the levels of polycyclic aromatic hydrocarbons (PAHs) in soils, temporal trends and profiles of 16 US Environmental Protection Agency priority PAHs were studied in soil and ash samples collected 1, 5, and 9 months after forest fires in South Korea.     

Contamination and potential sources of polybrominated diphenyl ethers (PBDEs) in water and sediment from the artificial Lake Shihwa, Korea

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in water and sediment collected from the artificial Lake Shihwa and surrounding creeks. Total concentrations of 23 PBDE congeners in water and sediment ranged from 0.16 to 11.0 ng L⁻¹ and from 1.3 to 18 700 ng g⁻¹ dry weight, respectively. The concentrations of BDE 209 in water and sediment were 1-2 orders of magnitude higher than the total concentrations of other PBDE congeners. The concentrations of total PBDEs and BDE 209 in sediments were the highest compared to previously reported worldwide levels. The highest concentrations of PBDEs in water and sediments were found in creeks near industrial complexes. The PBDE concentrations gradually decreased with increasing distance from the creeks to the inshore and then offshore regions of the lake. BDE 209 was a major congener, accounting for 80% of the total PBDEs in water and sediment, consistent with a high consumption of deca-BDE for the brominated flame retardant market in Korea. Non-parametric multidimensional scaling ordination showed that surrounding creeks are major pathways of PBDE contamination associated with deca-BDE technical mixtures used in industrial complexes around Lake Shihwa. A significant correlation between total organic carbon and total PBDE concentration was found in sediments, and the correlation coefficients for individual PBDE congeners relatively increased from lower to higher brominated congeners.     

Revised relative potency values for PCDDs, PCDFs, and non-ortho-substituted PCBs for the optimized H4IIE-luc in vitro bioassay

While the World Health Organization 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalency factors are useful estimates of relative potencies of mixtures when conducting risk assessments, they are not useful when comparing the results of bioassays such as the H4IIE-luc to concentrations of TCDD equivalents calculated from instrumental analyses. Since there are thousands of dioxin-like compounds (DLCs), one use of screening assays is to determine if all of the aryl hydrocarbon receptor (AhR) active DLCs in a mixture have been accounted for in instrumental analyses. For this purpose, bioassay-specific relative potency (ReP) values are needed. RePs of 21 polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls that exhibit effects mediated through the AhR were determined by use of the H4IIE-luc assay. Different values of RePs are derived, depending on the statistical, curve-fitting methods used to derive them from the dose–response relationships. Here, we discuss the various methods for deriving RePs from in vitro data and their assumptions and effects on values of RePs. Full dose–response curves of 2,3,7,8-TCDD and other representative DLCs were used to estimate effective concentrations at multiple points (e.g., EC20-50-80), which were then used to estimate ReP of each DLC to 2,3,7,8-TCDD.     

Determinants of homeowners' attitudes to the installation of high-voltage overhead transmission lines

This article deals comprehensively with factors which influence attitudes to the placement of high-voltage overhead transmission lines (HVOTLs). It employs an analytical schema which links the initial stimulus of the power lines' proposal in an area to Background and Socio-economic independent variables and a set of mediating variables. From a survey of 600 residents in three different domiciliary settings in Queensland, Australia, results indicate an absence of positive attitudes and, at best, neutral ones to HVOTL placement. By multinomial logistic regression, the study probes the grounds behind negativity and extreme negativity, uncovering direct links between these attitudes and certain of the variables included in the analytical schema.     

Field application of electrokinetic remediation for multi-metal contaminated paddy soil using two-dimensional electrode configuration

In this study, we evaluated the feasibility of in situ electrokinetic remediation for arsenic (As)-, copper (Cu)-, and lead (Pb)-contaminated soil, in a pilot-scale field application with two-dimensional electrode configurations. Square and hexagonal configurations with different electrode spacing, 1 m and 2?m, were investigated under a constant 100 V. A square configuration with electrode spacing of 2 m removed 61.5 % of As, 11.4 % of Cu, and 0.9 % of Pb, respectively, and a hexagonal configuration with the same spacing showed a higher removal efficiency in top (59 % of As, 0–0.5 m) and middle (53 % of As, 0.5–1.0 m) layers, but much lower removal efficiency in the bottom layer (1–1.5 m), which was thought to be due to groundwater flow through periodic rise and fall of tides. Fractionation analysis showed that As bound to Fe–Mn oxyhydroxide was the main form of As removed by the electrokinetic process. The two-dimensional configuration wasted less electrical energy by Joule heating, and required fewer electrode installations, compared to the one-dimensional electrode configuration.     

Effect of culture time on the growth curve and power performance in a microbial fuel cell at a fixed amount of liquid culture

The microbial fuel cell uses the microorganism biochemistry to carry on the energy conversion. Concerning the experimental precision, the colony culture would be replaced by a fixed amount of liquid culture for Microbial fuel cell of Escherichia coli. The anode and cathode chambers whose each volume is 100 mL were utilized, the effective surface area of proton exchange membrane Nafion-117 is about 9 cm². In addition, the electrode area of carbon cloth is 20 cm². Three kinds of Escherichia coli, named as BCRC No. 10322, 10675 and 51534, respectively, would be selected. Results show that the electricity performance of Escherichia coli of BCRC No.51534 is better than the other microorganism studied because of having a larger open circuit voltage of 1.01 V and limiting current 22 mA, the maximum power density of 1342 mW/m^2, and average working power density of 295 mW/m² would be produced. These results would be useful to improve the performance of microbial fuel cell.     

Seasonal Variations and Chemical Forms of Heavy Metals in Soils and Dusts from the Satellite Cities of Seoul, Korea

This research investigated heavy metal pollution of soils and dusts in two representative satellite cities of Seoul, Korea and studied the seasonal variations in metal concentrations through the rainy season and the chemical forms of metals using a sequential extraction analysis. The metal dispersion pattern was illustrated to match with urban structure. Soil and dust samples were collected from the cities of Uijeongbu and Koyang, which are the northern and northwestern satellite cities of Seoul (the capital), before and after rainy season. Concentrations of Cu, Pb and Zn were higher than those of the world averages for soils, and their levels decreased after rain, particularly in highly contaminated samples. Relatively high pH values were found in roadside soils, but no seasonal variation was found after the rainy season. The three metals (Cu, Pb and Zn) in soils and dusts were associated with various chemical fractions of soils and dusts as distinguished by the sequential extraction scheme, and a strong similarity of metal association between soils and dusts was found, which indicates that airborne dust may be a principle source of soil contamination. Copper is uniformly distributed, and Pb is largely associated with the reducible phase. There is an appreciable proportion of total Zn in the exchangeable/water-acid soluble fraction. After the rainy season, the most soluble fractions in soils and dusts were leached away. In terms of mobility and bioavailability of metals in soils and dusts, the order Zn >> Cu > Pb is suggested. Geographical variations of total metals corresponded well with urbanised areas of cities, especially the industrial complex and major motorways.