Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction

The purpose of this study is to quantify the thermal conductivity of sewage sludge related to reaction temperature for the optimal design of a thermal hydrolysis reactor. We continuously quantified the thermal conductivity of dewatered sludge related to the reaction temperature. As the reaction temperature increased, the dewatered sludge is thermally liquefied under high temperature and pressure by the thermal hydrolysis reaction. Therefore, the bound water in the sludge cells comes out as free water, which changes the dewatered sludge from a solid phase to slurry in a liquid phase. As a result, the thermal conductivity of the sludge was more than 2.64 times lower than that of the water at 20℃. However, above 200℃, it became 0.704 W/m?°C, which is about 4% higher than that of water. As a result, the change in physical properties due to thermal hydrolysis appears to be an important factor for heat transfer efficiency.

ImplicationsThe thermal conductivity of dewatered sludge is an important factor the optimal design of a thermal hydrolysis reactor. The dewatered sludge is thermally liquefied under high temperature and pressure by the thermal hydrolysis reaction. The liquid phase slurry has a higher thermal conductivity than pure water.     

A study on the characteristics of silt loading on paved roads in the Seoul metropolitan area using a mobile monitoring system

This study is considered the first attempt to apply a mobile monitoring system to estimating silt loading on paved roads in a megacity such as the Seoul metropolitan area. Using a mobile monitoring system developed in 2005, we estimated silt loadings on representative paved roads in the Seoul metropolitan area, including the city of Incheon, over a period of 3 yr. The temporal and spatial characteristics of silt loading were investigated for the carefully selected roads that may reflect the characteristics of the cities of Seoul and Incheon. In this study, changes in the average silt loading values were investigated in terms of land use, the temporal resolution of data acquisition (i.e., seasonal, daily, three-hour scale), the road width or number of lanes, and rainfall, which may affect the characteristics of the average silt loading significantly. It was found that the advantages of using the mobile monitoring system are its ability to obtain a large quantity of silt loading data in a short period of time and over a wide area and its ability to create a silt loading map showing the relative magnitude of silt loading in relation to a specific location, which makes it possible to easily locate hot spots.     

Temporal trend (1988-2008) of hexabromocyclododecane enantiomers in herring gull eggs from the German coastal region

Levels of α-, β-, and γ-hexabromocyclododecane (HBCD) were determined in pooled eggs from herring gulls (Larus argentatus) sampled on three bird sanctuaries near the German North Sea coast between 1988 and 2008 (Mellum and Trischen) and the German Baltic Sea coast between 1998 and 2008 (Heuwiese) and archived by the German Environmental Specimen Bank. Pressurized fluid extraction, gel permeation chromatography, and LC-MS/MS using ¹³C₁₂-labelled isotope standards and a chiral column were applied. α-HBCD was the dominating diastereomer and ranged between 3.7 and 107 ng g⁻¹ lw while β- and γ-HBCD were throughout close to LOQ. The highest α-HBCD concentration was found in eggs from Mellum sampled in the year 2000. Interestingly, HBCD in eggs from the three islands displayed similar time courses with levels increasing to a peak contamination around 2000 and decreasing levels ever since. Chiral signatures of α-HBCD in eggs differed among the islands but indicated a preferential enrichment of the first eluting enantiomer (−)-α-HBCD.     

Inactivation of Bacillus subtilis spores during ozonation in water treatment plant: influence of pre-treatment and consequences for positioning of the ozonation step

This study reports on quantitative methodology for rational selection of the ozone injection point within unit processes of conventional drinking water treatment plants to improve disinfection efficiencies. The method is based on the fact that a specific inactivation level of microorganisms is achieved at a unique value of ozone exposures, independent of ozone dose and type of water, and quantitatively described by a Delayed Chick-Watson model (C T(lag): 1.03mgl(-1), k: 1.44mg(-1)lmin(-1)). This study demonstrated this phenomenon by performing the inactivation of Bacillus subtilis (B. subtilis) spores with ozone in various types of water collected from a series of unit processes in a water treatment plant. Simple measurements of the ozone decomposition behavior in waters from each unit process of a water treatment plant can allow the quantitative evaluation of the ozone needed to achieve a required level of inactivation. This methodology will be useful for drinking water treatment plants which intend to improve the disinfection efficiencies of their ozonation process.     

Estimating the Microbial Risk of E. coli in Reclaimed Wastewater Irrigation on Paddy Field

Microbial risk was quantified to assess human health risk as a result of exposure to E. coli in reclaimed wastewater irrigation. Monitoring data on E. coli were collected from pond water in paddy rice plots during the growing season. Five treatments were used and each was triplicated to evaluate the changes in E. coli concentrations in experiments performed in 2003 and 2004. The Beta-Poisson model was used to estimate the microbial risk of pathogen ingestion among farmers and neighboring children. A Monte Carlo simulation (10,000 trials) was conducted to estimate the risk associated with uncertainty. In this study, risk values ranged from 10⁻⁴ to 10⁻⁸. UV-disinfected irrigation water showed a lower risk value than others, and its level was within the range of the actual paddy rice field with surface water. Agricultural activity was thought to be safer after 1–2 days, when the paddy field was irrigated with reclaimed wastewater. Also, children were found to have a greater risk of infection with E. coli. This paper should be viewed as a first step in the application of quantitative microbial risk assessment of wastewater reuse in paddy rice culture.     

Development of combined plant of biogas and bio solid-refuse-fuel from swine manure slurry

Journal of Material Cycles and Waste Management - An environment-friendly treatment of organic waste like swine manure and food waste is considered to be big challenge, because the residue of...     

Prüfanforderungen des Umweltbundesamtes zur Bewertung der Auswirkungen von Pflanzenschutzmitteln auf terrestrische Pflanzen

The fundamental data requirements for the authorization of plant protection products and the inclusion of active ingredients in Annex I of Council Directive 91/414/EEC are described in the Annexes II and III of this Directive. Definite instructions with regard to preconditions and for implementation and methodology (guidelines) concerning investigations with terrestrial plants are deficient. In the following, the scientific data requirements are explained for assessing the effects of plant protection products on terrestrial plants.     

Water extraction with CO2 bubbling as pretreatment of melting-furnace fly ash for metal recovery

In Japan, melting-furnace fly ash (MFA) generated from ash melting and gasification/melting plants is considered an “urban mine” due to its high metal content. This study aimed to develop a novel approach to pretreating MFA for metal recovery. Water extraction with CO₂ bubbling was investigated because MFA mainly consists of water-soluble salts containing elements such as Cl, Ca, Na, and K. Instead of acid addition, CO₂ bubbling was applied to maintain the optimal pH for minimizing the release of target metal elements and maximizing the removal of undesirable elements during water extraction. The results revealed that CO₂ bubbling effectively decreased the release of Pb, Zn, and Cd into the treatment water. This was mainly due to coprecipitation with CaCO₃, which was primarily formed by the reaction of Ca²⁺ from the MFA with CO₃ ²⁻ from the CO₂ gas. The bubbling process also helped accelerate the removal of Cl from MFA. Furthermore, the study showed that it is possible to lower the water-to-solid ratio to 5 with only a slight reduction in water extraction effect. Finally, approximately four times the concentration of target metals (rare metals and Cu, Pb, and Zn) was achieved by removing 90% of Cl, 70%–90% of Na and K, and 30%–40% of Ca through water extraction with CO₂ bubbling, resulting in a concentration of target metals that was nearly equal to that of ore.     

Observed chemical characteristics of long-range transported particles at a marine background site in Korea

Deokjeok Island is located off the west coast of the Korean Peninsula and is a suitable place to monitor the long-range transport of air pollutants from the Asian continent. In addition to pollutants, Asian dust particles are also transported to the island during long-range transport events. Episodic transport of dust and secondary particles was observed during intensive measurements in the spring (March 31-April 11) and fall (October 13-26) of 2009. In this study, the chemical characteristics of long-range-transported particles were investigated based on highly time-resolved ionic measurements with a particle-into-liquid system coupled with an online ion chromatograph (PILS-IC) that simultaneously measures concentrations of cations (Li+, Na , NH4+, K+, Ca2+, Mg2+) and anions (F-, C1-, NO3-, SO42-). The aerosol optical thickness (AOT) distribution retrieved by the modified Bremen Aerosol Retrieval (M-BAER) algorithm from moderate resolution imaging spectroradiometer (MODIS) satellite data confirmed the presence of a thick aerosol plume coming from the Asian continent towards the Korean peninsula. Seven distinctive events involving the long-range transport (LRT) of aerosols were identified and studied, the chemical components of which were strongly related to sector sources. Enrichment of acidic secondary aerosols on mineral dust particles, and even of sea-salt components, during transport was observed in this study. Backward trajectory, chemical analyses, and satellite aerosol retrievals identified two distinct events: a distinctively high [Ca2++Mg2]/[Na+] ratio (>2.0), which was indicative of a preprocessed mineral dust transport event, and a low [Ca2++Mg2+]/[Na+] ratio (<2.0), which was indicative of severe aging of sea-salt components on the processed dust particles. Particulate C1- was depleted by up to 85% in spring and 50% in the fall. A consistent fraction of carbonate replacement (FCR) averaged 0.53 in spring and 0.55 in the fall. Supporting evidences of C1- enrichment on the marine boundary layer prior to a dust front were also found. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for sector and air mass classifications of clean and LRT cases.