Assessing joint toxicity of chemicals in Enchytraeus albidus (Enchytraeidae) and Porcellionides pruinosus (Isopoda) using avoidance behaviour as an endpoint

Contamination problems are often characterized by complex mixtures of chemicals. There are two conceptual models usually used to evaluate patterns of mixture toxicity: Concentration Addition (CA) and Independent Action (IA). Deviations from these models as synergism, antagonism and dose dependency also occur. In the present study, single and mixture toxicity of atrazine, dimethoate, lindane, zinc and cadmium were tested in Porcellionides pruinosus and Enchytraeus albidus, using avoidance as test parameter. For both species patterns of antagonism were found when exposed to dimethoate and atrazine, synergism for lindane and dimethoate exposures (with the exception of lower doses in the isopod case study) and concentration addition for cadmium and zinc occurred, while the exposure to cadmium and dimethoate showed dissimilar patterns.This study highlights the importance of dose dependencies when testing chemical mixtures and that avoidance tests can also be used to asses the effects of mixture toxicity.     

Vapor-phase concentrations of PAHs and their derivatives determined in a large city: Correlations with their atmospheric aerosol concentrations

Thirteen PAHs, five nitro-PAHs and two hydroxy-PAHs were determined in 55 vapor-phase samples collected in a suburban area of a large city (Madrid, Spain), from January 2008 to February 2009. The data obtained revealed correlations between the concentrations of these compounds and a series of meteorological factors (e.g., temperature, atmospheric pressure) and physical–chemical factors (e.g., nitrogen and sulfur oxides). As a consequence, seasonal trends were observed in the atmospheric pollutants. A “mean sample” for the 14-month period would contain a total PAH concentration of 13 835 ± 1625 pg m⁻³ and 122 ± 17 pg m⁻³ of nitro-PAHs. When the data were stratified by season, it emerged that a representative sample of the coldest months would contain 18 900 ± 2140 pg m⁻³ of PAHs and 150 ± 97 pg m⁻³ of nitro-PAHs, while in an average sample collected in the warmest months, these values drop to 9293 ± 1178 pg m⁻³ for the PAHs and to 97 ± 13 pg m⁻³ for the nitro-PAHs. Total vapor phase concentrations of PAHs were one order of magnitude higher than concentrations detected in atmospheric aerosol samples collected on the same dates. Total nitro-PAH concentrations were comparable to their aerosol concentrations whereas vapor phase OH-PAHs were below their limits of the detection, indicating these were trapped in airborne particles.     

Arsenic, chromium and mercury removal using mussel shell ash or a sludge/ashes waste mixture

Different batches of valued mussel shell and waste mussel shell ash are characterised. Shell ash has pH?>?12 and high electrical conductivities (between 16.01 and 27.27 dS?m^?1), while calcined shell shows pH values up to 10.7 and electrical conductivities between 1.19 and 3.55 dS?m^?1. X-ray fluorescence, nitric acid digestion and water extractions show higher concentrations in shell ash for most parameters. Calcite is the dominant crystalline compound in this ash (95.6 %), followed by aragonite. Adsorption/desorption trials were performed for mussel shell ash and for a waste mixture including shell ash, sewage sludge and wood ash, showing the following percentage adsorptions: Hg(II) >94 %, As(V) >96 % and Cr(VI) between 11 and 30 % for shell ash; Hg(II) >98 %, As(V) >88 % and Cr(VI) between 30 and 88 % for the waste mixture. Hg and As desorption was <5 % for both shell ash and the waste mixture, while Cr desorption was between 92 and 45 % for shell ash, and between 19 and 0 % for the mixture. In view of that, mussel shell ash and the mixture including shell ash, sewage sludge and wood ash could be useful for Hg(II) and As(V) removal.     

The influence of natural stressors on the toxicity of nickel to <Emphasis Type="Italic">Daphnia magna</Emphasis>

Global warming has become a source of awareness regarding the potential deleterious effects of extreme abiotic factors (e.g., temperature, dissolved oxygen (DO) levels) and also their influence on chemicals toxicity. In this work, we studied the combined effects of nickel and temperature (low and high levels) and nickel and low levels of DO to Daphnia magna, and concentration addition and independent action concepts as well as their deviations for synergism/antagonism, dose ratio and dose level dependency, were applied to survival and feeding rate data. Nickel single exposure showed an LC₅₀ value for 48 h of 7.36 mg l⁻¹ and an EC₅₀ value for feeding impairment at 2.41 mg l⁻¹. In the acute exposures to high and low temperatures, 50% of mortality was observed, respectively, at 30.7°C and 4.2°C whereas 50% reduction on the feeding activity was recorded at 22.6°C and 16.0°C. Relatively to low DO levels, a LC₅₀ value for 48 h of 0.5 mg l⁻¹ was obtained; feeding activity EC₅₀ value was 2 mg l⁻¹. On acute combined experiments, antagonism was observed for the combination of nickel and extreme temperatures, whereas a synergistic behaviour was observed in the combined exposure of nickel and low DO levels. At sublethal levels, nickel showed to be the main inducer of toxicity at high and low temperatures but not at low levels of dissolved oxygen. Toxicokinetics and toxicodynamics modelling studies should be made in the future to understand the toxicological pathways involved on complex combinations of stressors and to validate any conclusions.     

Host community attitudes towards solid waste landfill infrastructure: comprehension before compensation

One of the most controversial planning issues internationally is the siting of waste disposal infrastructure in local communities. Compensation is viewed as a possible solution to siting difficulties in many countries. However, existing empirical evidence is conflicting as to whether or not compensation-based siting has reduced opposition to such developments. Thus, before compensation policy can be considered as the solution for recognising social costs and introducing equity into the waste planning system, it is important to understand why people reject waste disposal infrastructure developments and if this rejection continues over the lifetime of facility operations. This paper utilises information gathered through surveys to examine the effects of distance, local authority consultation efforts, experience and other factors, on attitudes towards non-hazardous solid waste landfill developments in two examples of a potential and actual host communities. Our findings suggest distance proxies expectations of environmental risk in communities with no experience of living with landfill infrastructure. Community consultations by authorities are consistently important, even after a landfill has been in operation for a number of years. This suggests to policy makers to consult thoroughly and adequately before pursuing compensation policies.     

Dibenzothiophene desulfurization by Gordonia alkanivorans strain 1B using recycled paper sludge hydrolyzate

Enzymatic hydrolyzates of recycled paper sludge were tested as suitable feedstock for biological desulfurization by Gordonia alkanivorans strain 1B. Only the hydrolyzate obtained after enzymatic mixture dialysis (dialyzed hydrolyzate) allowed dibenzothiophene (DBT) desulfurization, in spite of faster bacterial growth did occur on non-dialyzed hydrolyzate. For dialyzed hydrolyzate, 250microM DBT was consumed after 96h displaying a maximum specific productivity of 2-hydroxybiphenyl of 1.1micromol g(-1)(dry cell weight) h(-1). A comparison of the kinetics of biodesulfurization was assessed according to the type of hydrolyzate supplementation. Complete consumption of DBT was observed upon the addition of only phosphates and ammonia although further addition of zinc did increase the 2-hydroxybiphenyl production by 14%. Strain 1B was able to desulfurize a model oil containing DBT, 4-methylDBT and 4,6-dimethylDBT, reducing by 63% the total sulfur content in 168h.     

Do disinfection byproducts in drinking water have an effect on human cancer risk worldwide? A meta‐analysis

In the present study, a meta‐analysis was carried out to clarify the association between disinfection byproducts (DBPs) in drinking water and human cancer risk worldwide. Kidney, colorectal, esophagus, urinary bladder, brain, breast, leukemia, lung, and rectum cancers were selected to perform this analysis. According to preferred reporting items for systematic review and meta‐analysis protocol (PRISMA) guidelines, the relevant studies were identified and selection criteria (inclusion and exclusion criteria) were applied. Next, effective subgroups in these studies (gender, type of drinking water source, and type of DBPs) were analyzed. The quality of the studies was evaluated using the Newcastle‐Ottawa Scale. In addition, this overall study included analyses of 16 case–control and 3 cohort studies. The overall odds ratio (OR) with 95% confidence intervals (CI) between DBPs and cancer risk was 1.01 (95% CI, 0.94–1.09). The summary ORs of cancer risk were 1.04 (95% CI, 0.89–1.19) for kidney; 0.98 (95% CI, 0.87–1.09) for colorectal; 1.07 (95% CI, 0.84–1.29) for esophagus; 0.93 (95% CI, 0.80–1.06) for pancreatic; 1.00 (95% CI, 0.83–1.18) for brain; 1.13 (95% CI, 0.99–1.26) for breast; 0.93 (95% CI, 0.72–1.13) for leukemia; and 1.18 (95% CI, 1–1.36) for lung cancers. The results of this meta‐analysis suggested that there is not a significant association between DBPs in water and cancer risk. In addition, subgroup analysis shows a positive association with colorectal and kidney cancer risk in men, as well as colon and breast cancers in females. Studies of both genders have shown a significant association between lung and pancreatic cancers. Moreover, this study finds a significant relationship between cancer rate and consumers of city water and bottled water sources. In analyzing different types of DBPs in water, chlorine and trichloromethane show a significant association in increasing cancer risk.     

Cork stoppers as an effective sorbent for water treatment: the removal of mercury at environmentally relevant concentrations and conditions

The technical feasibility of using stopper-derived cork as an effective biosorbent towards bivalent mercury at environmentally relevant concentrations and conditions was evaluated in this study. Only 25 mg/L of cork powder was able to achieve 94 % of mercury removal for an initial mercury concentration of 500 μg/L. It was found that under the conditions tested, the efficiency of mercury removal expressed as equilibrium removal percentage does not depend on the amount of cork or its particle size, but is very sensitive to initial metal concentration, with higher removal efficiencies at higher initial concentrations. Ion exchange was identified as one of the mechanisms involved in the sorption of Hg onto cork in the absence of ionic competition. Under ionic competition, stopper-derived cork showed to be extremely effective and selective for mercury in binary mixtures, while in complex matrices like seawater, moderate inhibition of the sorption process was observed, attributed to a change in mercury speciation. The loadings achieved are similar to the majority of literature values found for other biosorbents and for other metals, suggesting that cork stoppers can be recycled as an effective biosorbent for water treatment. However, the most interesting result is that equilibrium data show a very rare behaviour, with the isotherm presenting an almost square convex shape to the concentration axis, with an infinite slope for an Hg concentration in solution around 25 μg/L.