Moving beyond the conceptual: specificity in regional climate change adaptation actions for biodiversity in South East Queensland,Australia

While many scientific assessments have been recommending general strategies for biodiversity conservation under climate change, translation of these recommendations into specific actions and practice has been limited. Focusing on two biomes, rainforest and wetlands in biodiverse South East Queensland, Australia, we demonstrate how general principles can be translated into specific actions for stakeholders and responsible agencies. We synthesize research that is contextualizing protection of refugia and habitat connectivity, establishing baseline data sets to detect change and developing strategic conservation planning scenarios to adjust reserve boundaries or situate new reserves. This has been achieved by coupling spatial information on biological assets (i.e. ecosystems and species) with future climate scenarios and process models to anticipate movement of critical habitats. Conservation planning software is also being used to prioritize investment to meet specific objectives. This approach is enabling us to identify at-risk biological assets, opportunities to ameliorate threats and obstacles to delivering regional adaptation actions. A larger total reserved area is needed, with proactive planning to capture areas further inland and along watercourses. Major obstacles include conflict between urbanization and priorities for habitat conservation and the need for greater levels of investment for monitoring programmes and to protect landward shifted wetlands on private land.     

Risk assessment of contaminated sediments in river basins--theoretical considerations and pragmatic approach

In order to ensure chemical quality of river basins, measures as required in the Water Framework Directive will also have to address contaminated sediments with subsequent monitoring of their successful application. Financial resources need to be allocated as part of a river basin plan to those contaminated sites that pose the biggest risk to the river basin. In order to differentiate between areas with elevated contaminant levels ("areas of concern") and those sites from which contaminated sediments can become resuspended and transported with the river, affecting the water phase and downstream sites in the catchment ("areas of risk"), the dynamics of sediment and suspended matter need to come into focus. Hydrological data have to be combined with concentration of suspended matter and its contaminant concentration to allow assessment of particle bound contaminant load. Each of these kinds of data, however, are subject to uncertainties--e.g. due to natural variability, heterogeneity of the matrix, challenges during sampling and chemical analyses of the suspended matter. Considering these uncertainties throughout the traceability chains of data collection, use of different lines of evidence and tools like fuzzy logic will increase the confidence of potentially costly management decisions.     

Monitoring the formation of structures and patterns during initial development of an artificial catchment

The objective of this paper is to present observations, results from monitoring measurements, and preliminary conclusions about the development of patterns and structures during the first 5 years of development of an artificial catchment starting from point zero. We discuss the high relevance of initial system traits and external events for the system development and draw conclusions for further research. These investigations as part of a Collaborative Research Center, aim to disentangle and understand the feedback mechanisms and interrelationships of processes and their co-development with spatial and temporal structures and patterns by studying an initial, probably less complex ecosystem. Therefore, intensive measurements were carried out in the catchment with regard to the development of surface structures, hydrological patterns, vegetation dynamics, water chemistry, and element budgets. During the first 5 years, considerable changes within the catchment were observed. Both internal and external factors could be identified as driving forces for the formation of structures and patterns in the artificial catchment. Initial structures formed by the construction process and initial substrate characteristics were decisive for the distribution and flow of water. External factors like episodic events triggered erosion and dissection during this initial phase, promoted by the low vegetation cover, and the unconsolidated sandy substrate. The transformation of the initial geosystem into areas with evolving terrestrial or aquatic characteristics and from a very episodic to a more permanent stream network and discharge, together with the observed vegetation dynamics increased site diversity and heterogeneity with respect to water and nutrient availability and transformation processes compared with the more homogenous conditions at point zero. The processes and feedback mechanisms in the initial development of a new landscape may deviate in rates, intensity, and dominance from those known from mature ecosystems. It is therefore crucial to understand these early phases of ecosystem development and to disentangle the increasingly complex interactions between the evolving terrestrial and aquatic, biotic, and abiotic compartments of the system. Long-term monitoring of initial ecosystems may provide important data and parameters on processes and the crucial role of spatial and temporal structures and patterns to solve these problems. Artificially created catchments could be a suitable tool to study these initial developments at the landscape scale under known, designed, and defined boundary conditions.     

Air Quality Measurements from the Fresno Supersite

ABSTRACT

The Fresno Supersite intends to 1) evaluate non-routine monitoring methods, establishing their comparability with existing methods and their applicability to air quality planning, exposure assessment, and health effects studies; 2) provide a better understanding of aerosol characteristics, behavior, and sources to assist regulatory agencies in developing standards and strategies that protect public health; and 3) support studies that evaluate relationships between aerosol properties, co-factors, and observed health end-points. Supersite observables include in-situ, continuous, short-duration measurements of 1) PM_2.5, PM₁₀, and coarse (PM₁₀ minus PM_2.5) mass; 2) PM_2.5 SO₄ ^-2, NO₃ ^-, carbon, light absorption, and light extinction; 3) numbers of particles in discrete size bins ranging from 0.01 to ~10μm; 4) criteria pollutant gases (O₃, CO, NO_x); 5) reactive gases (NO₂, NO_y, HNO₃, peroxyacetyl nitrate [PAN], NH₃); and 6) single particle characterization by time-of-flight mass spectrometry. Field sampling and laboratory analysis are applied for gaseous and particulate organic compounds (light hydrocarbons, heavy hydrocarbons, carbonyls, polycyclic aromatic hydrocarbons [PAH], and other semi-volatiles), and PM_2.5 mass, elements, ions, and carbon. Observables common to other Supersites are 1) daily PM_2.5 24-hr average mass with Federal Reference Method (FRM) samplers; 2) continuous hourly and 5-min average PM_2.5 and PM₁₀ mass with beta attenuation monitors (BAM) and tapered element oscillating microbalances (TEOM); 3) PM_2.5 chemical specia-tion with a U.S. Environmental Protection Agency (EPA) speciation monitor and protocol; 4) coarse particle mass by dichotomous sampler and difference between PM₁₀ and PM_2.5 BAM and TEOM measurements; 5) coarse particle chemical composition; and 6) high sensitivity and time resolution scalar and vector wind speed, wind direction, temperature, relative humidity, barometric pressure, and solar radiation. The Fresno Supersite is coordinated with health and toxicological studies that will use these data in establishing relationships with asthma, other respiratory disease, and cardiovascular changes in human and animal subjects.     

Limitations for heavy metal release during thermo-chemical treatment of sewage sludge ash

Phosphate recycling from sewage sludge can be achieved by heavy metal removal from sewage sludge ash (SSA) producing a fertilizer product: mixing SSA with chloride and treating this mixture (eventually after granulation) in a rotary kiln at 1000 ± 100 °C leads to the formation of volatile heavy metal compounds that evaporate and to P-phases with high bio-availability. Due to economical and ecological reasons, it is necessary to reduce the energy consumption of this technology. Generally, fluidized bed reactors are characterized by high heat and mass transfer and thus promise the saving of energy. Therefore, a rotary reactor and a fluidized bed reactor (both laboratory-scale and operated in batch mode) are used for the treatment of granulates containing SSA and CaCl₂. Treatment temperature, residence time and - in case of the fluidized bed reactor - superficial velocity are varied between 800 and 900 °C, 10 and 30 min and 3.4 and 4.6 m s⁻¹. Cd and Pb can be removed well (>95 %) in all experiments. Cu removal ranges from 25% to 84%, for Zn 75-90% are realized. The amount of heavy metals removed increases with increasing temperature and residence time which is most pronounced for Cu.In the pellet, three major reactions occur: formation of HCl and Cl₂ from CaCl₂; diffusion and reaction of these gases with heavy metal compounds; side reactions from heavy metal compounds with matrix material. Although, heat and mass transfer are higher in the fluidized bed reactor, Pb and Zn removal is slightly better in the rotary reactor. This is due the accelerated migration of formed HCl and Cl₂ out of the pellets into the reactor atmosphere. Cu is apparently limited by the diffusion of its chloride thus the removal is higher in the fluidized bed unit.     

Gender differences in driver's license theory test scores in the Netherlands

INTRODUCTION: Gender differences were investigated in a sample of persons (N=34,755) who completed the driver's license theory test in the Netherlands. RESULTS: Contrary to recent findings from Sweden, no gender differences were found. IMPACT OF INDUSTRY: The present study signifies the importance of standardization in driver testing.     

Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles

Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO₂ immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO₂ concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO₂ concentration of the coating solution: 10%; Fe(II): 7.0 mg l⁻¹; solar exposure time: 120 min) were applied to natural water samples spiked with 500 μg l⁻¹ As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 μg l⁻¹) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO₂ can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO₂ immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.     

Tolerance of transgenic canola plants (Brassica napus) amended with plant growth-promoting bacteria to flooding stress at a metal-contaminated field site

The growth of transgenic canola (Brassica napus) expressing a gene for the enzyme 1-aminocyclopropane-1-carboxylate (ACC) deaminase was compared to non-transformed canola exposed to flooding and elevated soil Ni concentration, in situ. In addition, the ability of the plant growth-promoting bacterium Pseudomonas putida UW4, which also expresses ACC deaminase, to facilitate the growth of non-transformed and transgenic canola under the above mentioned conditions was examined. Transgenic canola and/or canola treated with P. putida UW4 had greater shoot biomass compared to non-transformed canola under low flood-stress conditions. Under high flood-stress conditions, shoot biomass was reduced and Ni accumulation was increased in all instances relative to low flood-stress conditions. This is the first field study to document the increase in plant tolerance utilizing transgenic plants and plant growth-promoting bacteria exposed to multiple stressors.