The effects of bisphenol A given in ovo on bursa of Fabricius development and percentage of acid phosphatase positive lymphocyte in chicken

Environmental Science and Pollution Research - Bisphenol A (BPA), one of the endocrine disrupting chemicals, is the object of great concern because of its widespread use throughout the world. In...     

Tissue distribution of perfluoroalkyl acids and health status in wild Mozambique tilapia (Oreochromis mossambicus) from Loskop Dam, Mpumalanga, South Africa

This study examined concentrations of 15 perfluoroalkyl acids (PFAAs) in tissues from male Mozambique tilapia (Oreochromis mossambicus) collected at Loskop Dam, Mpumalanga, South Africa in 2014 and 2016. Nine of the 15 PFAAs were detected frequently and were included in statistical analysis and included two of the most commonly known PFAAs, perfluorooctanesulfonic acid (PFOS) (median, 41.6 ng/g) and perfluorooctanoic acid (PFOA) (median, 0.0825 ng/g). Of the tissues measured, plasma (2016 and 2014 median, 22.2 ng/g) contained the highest PFAA burden followed by (in descending order): liver (median, 11.6 ng/g), kidney (median, 9.04 ng/g), spleen (median, 5.92 ng/g), adipose (median, 2.54 ng/g), and muscle (median, 1.11 ng/g). Loskop Dam tilapia have been affected by an inflammatory disease of the adipose tissue known as pansteatitis, so this study also aimed to investigate relationships between PFAA tissue concentrations and incidence of pansteatitis or fish health status. Results revealed that healthy tilapia exhibited an overall higher (p-value < 0.05) PFAA burden than pansteatitis-affected tilapia across all tissues. Further analysis showed that organs previously noted in the literature to contain the highest PFAA concentrations, such as kidney, liver, and plasma, were the organs driving the difference in PFAA burden between the two tilapia groups. Care must be taken in the interpretations we draw from not only the results of our study, but also other PFAA measurements made on populations (human and wildlife alike) under differing health status.     

Scope for growth of Mytilus?galloprovincialis (Lmk., 1819) in oligotrophic coastal waters (Southern Tyrrhenian Sea, Italy)

The ‘scope for growth’ (SFG) tool was used to study the growth performance of cultivated populations of Mytilus galloprovincialis (Lmk., 1819) in an oligotrophic area of the Southern Mediterranean Sea. The study was carried out between 1993 and 1996 by using data from four seasonal oceanographic cruises and from growth experiments. Water samples were collected and analysed for total suspended matter (TSM), particulate organic carbon (POC) and nitrogen (PON), particulate lipids, proteins and carbohydrates and chloropigments. The sum of the carbon equivalents of carbohydrates, proteins and lipids is indicated as the total biopolymeric particulate organic carbon (BPC) and was converted into a unit of energy in order to calculate the SFG of a theoretical mussel of 5 cm length. In order to test the performance of mussel growth at two depths (5 and 15 m water depth), mussel body size [as ash free dry weight (AFDW)] and the actual concentrations of BPC were used to calculate the monthly SFG using the physiological energetic relationships suggested in the current literature. Data from the field cruises led us to characterise the study site as ultra-oligotrophic (annual average of chloropigment concentration approximately 0.5 μg L⁻¹). SFG calculations allowed us to identify a site where mussels grown successively were found to reach a commercial size in approximately 12 months. The good agreement obtained between energetic response and subsequent production response suggests that the available energy from particulate food could be fully available for organic production for maintaining “proportionate” growth trajectories, even in a ultra-oligotrophic system.     

Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage

This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications. In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES) purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical stability.     

Effects of Alkali Treatment on the Properties of Short Flax Fiber–Poly(Lactic Acid) Eco-Composites

In this study, the influence of alkali (NaOH) treatment on the mechanical, thermal and morphological properties of eco-composites of short flax fiber/poly(lactic acid) (PLA) was investigated. SEM analysis conducted on alkali treated flax fibers showed that the packed structure of the fibrils was deformed by the removal non-cellulosic materials. The fibrils were separated from each other and the surface roughness of the alkali treated flax fibers was improved. The mechanical tests indicated that the modulus of the untreated fiber/PLA composites was higher than that of PLA; on the other hand the modulus of alkali treated flax fiber/PLA was lower than PLA. Thermal properties of the PLA in the treated flax fiber composites were also affected. T_g values of treated flax fiber composites were lowered by nearly 10 °C for 10% NaOH treatment and 15 °C for 30% NaOH treatment. A bimodal melting behavior was observed for treated fiber composites different than both of neat PLA and untreated fiber composites. Furthermore, wide angle X-ray diffraction analysis showed that the crystalline structure of cellulose of flax fibers changed from cellulose-I structure to cellulose-II.     

Amygdalin in bitter and sweet seeds of apricots

Hydrogen cyanide (HCN) poisoning due to amygdalin (AMY) in apricot seeds is one of the public health issues in Turkey. The aim of this study was to investigate the AMY content of 13 different apricot seeds including bitter and sweet ones, and which are either sulfurized or roasted. The AMY content was determined by a high-performance liquid chromatography. Release of HCN was predicted and total amount of seeds which can cause poisoning was calculated. The mean AMY content of bitter seeds was 26 ± 14 mg g^?1 and that of sweet seeds was 0.16 ± 0.09 mg g^?1. The consumption of small amounts of bitter seeds may cause cyanide poisoning.     

Environmental and Economic Factors Can Increase the Risk of Exotic Species Introductions to the Arctic Region Through Increased Ballast Water Discharge

The effects of global warming can increase the risk of exotic species introductions in eastern Canadian Arctic waters by reducing surface ice cover and allow increased access to commercial vessels. Ballast water discharged by incoming overseas vessels is an important means for introducing species on a global scale. Analyses of air temperatures at Churchill, Manitoba between 1943 and 2002 indicated an increase in mean temperature within the past decade. Churchill is the only major northern port in this region where grain has been exported on a limited basis due to the short navigation season. Economic analyses of grain exported from Canadian and U.S. ports indicated some cost advantages for using northern ports. The Hudson Bay region is vulnerable to increased exotic species introductions because of its southerly location. Current ballast water exchange measures to reduce the risk of introductions may not be effective because most vessels enter the region with ballast, and the ballast exchange zone is located relatively close to coastal areas where the habitat could be favorable for an introduced species to become established. The probability of a large crab species introduced to this region from northern European waters is discussed. The risk of ballast water–related exotic species introduction to this region may be reduced by expanding the types of cargo handled and developing a strong import market. This approach would accommodate an increase in the number of vessels with cargo, and substantially reduce the volume of ballast carried to this region.     

A Proactive Approach Can Make Site Remediation Less Expensive

Without any incentive to clean up a contaminated site, remediation is often delayed until the site owner is compelled to act by regulatory agencies. In such a context, the selected technology is typically the one that will reach the remediation goals as quickly as possible. Unfortunately, this criterion is often met by overly expensive technologies, resulting in high and sometimes unaffordable total remediation costs, leading to a remediation with a negative net benefit. This study examines the effects of time constraint and benefit value on the optimal remediation strategy for a diesel-contaminated site. This strategy is developed using the technico-economic model METEORS, which takes into account the technology’s effectiveness, the uncertainty of the level of contamination, and the possibility of reducing this uncertainty through either an additional characterization (before selecting and applying a technology) or the monitoring of the remediation technology (during its use). Results of simulations with both economic and temporal constraints support a proactive approach to site remediation.     

Integrated model for renewable energy planning in Turkey

All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements.