Prediction of syngas quality for two-stage gasification of selected waste feedstocks

This paper compares the syngas produced from methane with the syngas obtained from the gasification, in a two-stage reactor, of various waste feedstocks. The syngas composition and the gasification conditions were simulated using a simple thermodynamic model. The waste feedstocks considered are: landfill gas, waste oil, municipal solid waste (MSW) typical of a low-income country, the same MSW blended with landfill gas, refuse derived fuel (RDF) made from the same MSW, the same RDF blended with waste oil and a MSW typical of a high-income country. Energy content, the sum of H2 and CO gas percentages, and the ratio of H2 to CO are considered as measures of syngas quality. The simulation shows that landfill gas gives the best results in terms of both H2+CO and H2/CO, and that the MSW of low-income countries can be expected to provide inferior syngas on all three quality measures. Co-gasification of the MSW from low-income countries with landfill gas, and the mixture of waste oil with RDF from low-income MSW are considered as options to improve gas quality.     

Sorption of sulfonamide pharmaceutical antibiotics on whole soils and particle-size fractions

Residues of pharmaceutical antibiotics are found in the environment, whose fate and effects are governed by sorption. Thus, the extent and mechanisms of the soil sorption of p-aminobenzoic acid and five sulfonamide antibiotics (sulfanilamide, sulfadimidine, sulfadiazine, sulfadimethoxine, and sulfapyridine) were investigated using topsoils of fertilized and unfertilized Chernozem and their organic-mineral particle-size fractions. Freundlich adsorption coefficients (K(f)) ranged from 0.5 to 6.5. Adsorption increased with aromaticity and electronegativity of functional groups attached to the sulfonyl-phenylamine core. Adsorption to soil and particle-size fractions increased in the sequence: coarse silt < whole soil < medium silt < sand < clay < fine silt and was influenced by pH. Sorption nonlinearity (1/n 相似文献   

Field dissipation of acetochlor in two New Zealand soils at two application rates

The persistence of pesticides in soils has both economic and environmental significance and is often used as a key parameter in pesticide risk assessment. Persistence of acetochlor [2'-ethyl-6'-methyl-N-(ethoxymethyl)-2-chloroacetylanilide] in two New Zealand field soils was measured over two years and the data were used to identify models that adequately describe acetochlor persistence in the field. Acetochlor was sprayed onto six fallow plots (3 x 9 m each) at each site at the recommended rate (2.5 kg a.i. ha(-1)) and at twice that rate. Acetochlor concentrations were measured in soil cores. Simple first-order kinetics (Model 1) adequately described acetochlor persistence in Hamilton clay loam soil (Humic Hapludull, Illuvial Spadic) at the high application rate, but overestimated it at the low application rate. A quadratic model (Model 2), a first-order double-exponential model (Model 3), a first-order biphasic model (Model 4), or a two-compartment model (Model 5) better described acetochlor persistence at the low application rate. The time for 50% (DT50) and 90% (DT90) of initial acetochlor loss was approximately 9 and 56 d, and 18 and 63 d at low and high application rates, respectively. The more complex Models 2 through 5 also better described the biphasic dissipation of acetochlor in Horotiu sandy loam soil (Typic Orthic Allophanic) than Model 1, with Model 1 significantly underestimating acetochlor concentrations on the day of application at both application rates. The DT50 and DT90 values were 5 and 29 d and 7 and 31 d at low and high application rates, respectively. Overall, application rate significantly affected the DT50 and DT90 values in the Hamilton soil, but not in the Horotiu soil. Faster acetochlor loss in the Horotiu soil possibly resulted from the higher soil organic carbon content that retained more acetochlor near the soil surface where higher temperature and photolysis accelerated the loss.     

Physiological and Biochemical Effects of Simulated Acid Rain on Phaseolus Vulgaris Var. HUR-15

Pot experiments were performed to determine the effects of simulated acid rain on Phaseolus vulgaris var. HUR-15. Seeds of Phaseolus vulgaris var. HUR-15 were exposed to simulated acid rain at pH values of 5.1, 4.1, 3.1, 2.1 and 1.1 and a control level of pH 6.8. Plants were harvested at three stages, i.e. pre, peak and post-flowering stages. Seedlings succumbed at pH 1.1. Necrosis developed on the leaves of plants treated with water of pH 2.1, resulting in adverse effect on chlorophyll content. They died after peak-flowering. Root and shoot length and dry weight were reduced with the lowering in pH. Carbohydrate, nitrogen and protein contents decreased with the decrease in pH level, adversely affecting their nutrient value.     

Cellular energy allocation in zebra mussels exposed along a pollution gradient: linking cellular effects to higher levels of biological organization

Organisms exposed to suboptimal environments incur a cost of dealing with stress in terms of metabolic resources. The total amount of energy available for maintenance, growth and reproduction, based on the biochemical analysis of the energy budget, may provide a sensitive measure of stress in an organism. While the concept is clear, linking cellular or biochemical responses to the individual and population or community level remains difficult. The aim of this study was to validate, under field conditions, using cellular energy budgets [i.e. changes in glycogen-, lipid- and protein-content and mitochondrial electron transport system (ETS)] as an ecologically relevant measurement of stress by comparing these responses to physiological and organismal endpoints. Therefore, a 28-day in situ bioassay with zebra mussels (Dreissena polymorpha) was performed in an effluent-dominated stream. Five locations were selected along the pollution gradient and compared with a nearby (reference) site. Cellular Energy Allocation (CEA) served as a biomarker of cellular energetics, while Scope for Growth (SFG) indicated effects on a physiological level and Tissue Condition Index and wet tissue weight/dry tissue weight ratio were used as endpoints of organismal effects. Results indicated that energy budgets at a cellular level of biological organization provided the fastest and most sensitive response and energy budgets are a relevant currency to extrapolate cellular effects to higher levels of biological organization within the exposed mussels.     

A basidiomycete isolated from the skeleton of<Emphasis Type="Italic"> Pocillopora damicornis</Emphasis> (Scleractinia) selectively stimulates short-term survival of coral skeletogenic cells

Endolithic fungi bore through the extracellular calcium carbonate skeleton of reef-building scleractinian corals, both healthy and dead, and effect net erosion of coral reefs. Potential fungal interactions with coral tissue were investigated using an in vitro approach suggested by earlier observations of skeletal repair cones at the site of fungal perforation in Porites sp. A fungal strain was isolated from the skeleton of a long-term culture of healthy, tissue-covered, Pocillopora damicornis Linnaeus colonies maintained in a recirculating system in Monaco. As coral soft tissue spontaneously dissociated in vitro, the skeleton became exposed and hyaline hyphae emerged radially from 15% of the total clipped branches. In this study, which was performed between January 2001 and March 2003, 35 skeleton–hypha explants were embedded in agar-based solid medium, yielding 60% hyphal growth. A fungal strain (F19-3-1) of the dominant (80%) morphology was isolated and propagated in agar-based solid medium. The strain was identified by 18S and 26S rDNA gene sequence analysis as a basidiomycete in the genus Cryptococcus. Co-cultures were used to provide experimental exposure of coral soft tissue to the fungus. The fungus extended the survival of coral cells by 2 days, selectively maintaining skeletogenic cell types. This effect may be interpreted as stimulation by the fungus of a short-term coral defense response.Communicated by J.P. Grassle, New Brunswick     

Rotational application of bioinsecticide with deltamethrin-An antilarval measure for the control of filarial vector, Culex quinquefasciatus (Culicidae: Diptera)

A laboratory investigation was undertaken to study the cyclic usage of field recommended doses of Bacillus thuringiensis israelensis (Bti), Bacillus sphaericus (Bsp) and combination of Bti and Bsp (half the recommended dose of each) with deltamethrin 2.8 EC to attain better control of mosquito larvae. To understand the susceptibility status of the Culex quinquefasciatus larvae in the field, early fourth instar field collected larvae were exposed to the above treatments of biopesticides and were monitored for their persistency till 50% mortality was obtained. The larvae those survived in each treatment were transferred to the concentration of deltamethrin that gave 50% mortality. Observations on larval mortality after the treatment with deltamethrin were recorded after 24 h. The results revealed that Bti excels Bsp, as it recorded 54% mortality only on 17th day after application. The other salient finding of this study is LC50 of deltamethrin is sufficient to follow the biopesticides application for an effective control of Culex larvae.     

Kinetics of Biotransformation of 2,4-Dichlorophenol using UASB-Reactor

Chlorophenol compounds are environmental pollutants that are both anthropogenic and xenobiotics. Some of these chemicals are carcinogens and are both toxic to a number biochemical processes. Biotransformation of 2,4-dichlorophenol (2,4-DCP) was studied in the presence of glucose on an upflow anaerobic sludge blanket reactor (UASB) using mixed culture. A continuously operated UASB reactor was employed using mixed synthetic wastewater. Results obtained from the 1.8 L volume capacity UASB reactor were subjected to kinetic evaluation constants. Results indicate that the degradation of 2,4-DCP in the presence of glucose was strongly influenced by the concentration of the compound. High degradation levels were observed when the concentration of 2,4-DCP was in the range of 50-150 mg L(-1). Concentrations of 2,4-DCP above 160 mg L(-1) were toxic to microbes even in the presence of glucose. The maximum degradation of 2,4-DCP was found to be 70.4% when initial concentration of 2,4-DCP was 124 mg L(-1) and glucose concentration of 500 mg L(-1) at hydraulic retention time of 13.2 hr. The biodegradation followed first order reaction kinetics with a rate constant (K) of 0.67, Vmax of 0.244 kg m(-3) day(-1), Ks of 0.117 kg m(-3) day(-1) and correlation coefficient of 0.766.