Developing joint educational programs in sustainability science across different universities: a case study from Japan

The challenge for sustainability educational programs lies in how to imbue students with the strong motivation necessary to move the world in a more sustainable direction. Five universities in Japan have mutually collaborated in the design and development of a unique curriculum and education system for sustainability science since 2008. Specifically, they have developed a common and remote lecture system called the “Frontier of sustainability science” (FSS). This paper discusses the concepts and challenges of FSS and how it was organized to teach students to actively learn how to work with people of various disciplines to realize interdisciplinarity.     

Comparison of general water quality of rivers in Indonesia and Japan

In Java and Kalimantan in Indonesia, river water plays important roles in human life; for example, for transportation, and economic activities of the inhabitants. However, industrial, agricultural and domestic water is discarded into rivers directly in many developing countries, including Indonesia, since drainage systems have not been completely constructed. In this study, to evaluate the water quality and to compare those levels of environmental contaminants in developing and developed countries, water quality and contents of endocrine disrupters were measured in a total of 64 water samples (Indonesia; 28 samples and Japan; 36 samples) from 53 sites. The results indicated that, rivers in both capital cities, Jakarta and Tokyo, were contaminated. Water in rivers in Indonesia was not so heavily polluted as in Japan. Pollution in the river water in Indonesia appeared to be caused by the lack of sewerage systems. In addition, the findings on endocrine disrupters indicated that the concentration of alkylphenol in water samples was large enough to affect living organisms.     

Time trend of hexabromocyclododecane in the breast milk of Japanese women

Hexabromocyclododecane (HBCD) is a type of brominated flame retardant. We investigated the time trend of the stereoisomer-specific concentrations of HBCD (alpha, beta, and gamma) in breast milk samples of Japanese women by using liquid chromatography-tandem mass spectrometry (LC/MS/MS). The pooled milk lipid samples collected in 1973, 1978, 1983, 1988, 1993, 1999, and from 2000 to 2006 were analysed. The concentration was below the detection limit in the samples collected between 1973 and 1983 and increased in those collected since 1988. Between 1988 and 2006, alpha-HBCD was detected in all 11 breast milk samples collected from 25 to 29-year-old Japanese women; gamma-HBCD, in 7; and beta-HBCD, in none of the samples. Time trend of summation operatorHBCD appeared to be related to that of the industrial HBCD consumption level in Japan.     

Dehydrochlorination behavior of polyvinyl chloride and utilization of carbon residue: effect of plasticizer and inorganic filler

The dehydrochlorination behavior of plasticizer (DOP) and inorganic filler (CaCO₃) contained in PVC samples and the properties of the activated carbons produced from those carbon residues have been investigated. In the dehydrochlorination process, both additives contributed not only to a decrease in HCl yield but also to the prolonged evolution of HCl. Part of the Cl species were observed to be stabilized as CaCl₂ by reaction with calcium ions when CaCO₃ was added. More than 80% of chlorine removal was achieved in all samples at 533 K. The use of potassium as an activation agent led to the production of activated carbon with a specific surface area greater than 1000 m²/g at the low temperature of 1023 K and assisted also in the elimination of residual Cl species by the formation of KCl during activation. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Reactivity between PbSO4 and CaCO3 particles relevant to the modification of mineral particles and chemical forms of Pb in particles sampled at two remote sites during an Asian dust event

During the transboundary transport of anthropogenic heavy metals by mineral particles providing reaction sites, the divalent metal salt PbSO₄ can be converted to PbCO₃ in the presence of water. We carried out laboratory experiments to study the transformation process under various conditions by incorporating test particles comprising CaCO₃ of a particulate mineral component, PbSO₄, and NaCl. After the immersion of PbSO₄ particles in contact with CaCO₃ particles in a water droplet, the conversion of PbSO₄ into PbCO₃ was confirmed by the change in morphology of the original particles to stick or needle form; the percentages of the chemical forms relative to the total Pb were determined by X-ray absorption near edge structure (XANES) analysis. Approximately 60–80% of PbSO₄ was converted to PbCO₃ after 24 h. A small amount of stick particles was detected when NaCl particles attached to PbSO₄/CaCO₃ particles were exposed to air with a relative humidity (RH) of 80–90% for 24 h. XANES measurements of the samples revealed that the molar percentage of PbCO₃ relative to the total Pb content was 4%.Field experiments were also conducted to determine the chemical forms of the Pb particles during the Kosa (Asian dust storm) event. Samples were collected from two remote sites in Japan and Korea. The mass size distribution of Pb aerosols collected in Japan was bimodal with two peaks in the coarse mode; the enrichment factor of Pb suggested that its source was anthropogenic. Pb L3 edge XANES measurements of both samples indicated that they had similar shapes. These measurements also indicated that the major Pb components for the samples collected in Japan were PbO, PbSO₄ PbCl₂, and PbCO₃, with molar percentages of 44%, 30%, 21%, and 5%, respectively. No significant differences were found between the component ratios of the samples collected in Japan and Korea, suggesting that definite transformation did not occur during the transport of the Kosa particles from Korea to Japan. On the basis of these observations, we postulate that the transformation process either occurred mainly before the particles arrived at Korea or did not take place after the particles left continental Asia.     

Analysis of branched-chain fatty acids in humic substances as indices for compost maturity by pyrolysis–gas chromatography/mass spectrometry with tetramethylammonium hydroxide (TMAH-py–GC/MS)

Parameters that affect the degree of humification for humic substances (HSs) are deeply related to the maturity of the compost. In general, the matured composts contain HSs with a higher degree of humification. In addition, microbial activities during composting are also one of the indices for compost maturation. Branched-chain fatty acids are metabolites as the result of microbial activities in a soil environment. Such branched-chain fatty acids, regarded as humic precursors, are incorporated into HSs during the composting process. To determine whether branched-chain fatty acids in HSs can be used as biomarkers during composting processes or not, HSs were extracted from three types of composts with the different maturation, and the branched-chain fatty acids in the HSs were analyzed by pyrolysis–gas chromatography/mass spectrometry with tetramethylammonium hydroxide (TMAH-py–GC/MS). HSs with a higher degree of humification (higher aromaticity and lower molecular weight) contained higher levels of branched-chain fatty acids. These results show that branched-chain fatty acids in HSs from matured compost samples can be used as biomarkers, which indicate the history of microbial activities during overall composting process.     

Correlating pH and Swelling Degree Parameters to Understand the Sorption and Desorption Process of Diquat Herbicide from Nanocomposites Based on Polysaccharide and Clinoptilolite

Journal of Polymers and the Environment - Zeolite-based nanocomposites have become an efficient option for application in herbicide removal and controlled release systems. Our group previously...     

Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

Appropriate treatment of asbestos-containing wastes is a significant problem. In Japan, the inertization of asbestos-containing wastes based on new treatment processes approved by the Minister of the Environment is promoted. A highly sensitive method for testing asbestos fibers in inertized materials is required so that these processes can be approved. We developed a method in which fibers from milled treated materials are extracted in water by shaking, and are counted and identified by transmission electron microscopy. Evaluation of this method by using asbestos standards and simulated slag samples confirmed that the quantitation limits are a few million fibers per gram and a few μg/g in a sample of 50 mg per filter. We used this method to assay asbestos fibers in slag samples produced by high-temperature melting of asbestos-containing wastes. Fiber concentrations were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10^?6 f/g. Because the evaluation of treated materials by TEM is difficult owing to the limited amount of sample observable, this testing method should be used in conjunction with bulk analytical methods for sure evaluation of treated materials.