Individual preparedness and mitigation actions for a predicted earthquake in Istanbul

This study investigated the process of taking action to mitigate damage and prepare for an earthquake at the individual level. Its specific aim was to identify the factors that promote or inhibit individuals in this process. The study was conducted in Istanbul, Turkey—where an earthquake is expected soon—in May and June 2006 using qualitative methods. Within our conceptual framework, three different patterns emerged among the study subjects. Outcome expectancy, helplessness, a low socioeconomic level, a culture of negligence, a lack of trust, onset time/poor predictability, and normalisation bias inhibit individuals in this process, while location, direct personal experience, a higher education level, and social interaction promote them. Drawing on these findings, the paper details key points for better disaster communication, including whom to mobilise to reach target populations, such as individuals with direct earthquake experience and women.     

Optimization of carbon dioxide absorption in a continuous bubble column reactor using response surface methodology

Carbon dioxide absorption using amine based solvents is a well-known approach for carbon dioxide removal. Especially with the increasing concerns about greenhouse gas emissions, there is a need for an optimization approach capable of multifactor calibration and prediction of interactions. Since conventional methods based on empirical relations are not efficiently applicable, this study investigates use of Response Surface Methodology as a strong optimization tool. A bubble column reactor was used and the effect of solvent concentration (10.0, 20.0 and 30.0 vol%), flow rate (4.0, 5.0 and 6.0 L min⁻¹), diffuser pore size (0.5, 1.0 and 1.5 mm) and temperature (20.0, 25.0 and 30.0°C) on the absorption capacity and also overall mass transfer coefficient was evaluated. The optimization results for maintaining maximum capacity and overall mass transfer coefficient revealed that different optimization targets led to different tuned operational factors. Overall mass transfer coefficient decreased to 34.7 min⁻¹ when the maximum capacity was the desired target. High reaction rate along with the highest absorption capacity was set as desirable two factor target in this application. As a result, a third scenario was designed to maximize both mass transfer coefficient and absorption capacity simultaneously. The optimized condition was achieved when a gas flow rate of 5.9 L min⁻¹, MEA solution of 29.6 vol%, diffuser pore size of 0.5 mm and temperature of 20.6°C was adjusted. At this condition, mass transfer coefficient reached a maximum of 38.4 min⁻¹, with a forecasted achievable absorption capacity of 120.5 g CO₂ per kg MEA.     

以TEOS为硅源的聚硅氯化铝絮凝剂的制备及其物化特征

采用TEOS为硅源合成制备了新型的聚硅氯化铝PASC(A),并与传统方法合成的聚硅氯化铝PASC(B) 做了比较,探讨了产品的pH值和Zeta电位随B值和Si/Al摩尔比的变化关系,并利用酸解反应和²⁷Al NMR研究了硅引入对PASC分子结构和铝形态的影响.结果表明,由于采用了特殊的合成方法,与PASC(B)相比,PASC(A)具有更高的聚合度,分子量分布并且分子中铝硅分布均匀,不易被酸解聚,而且有利于Al₁₃形态稳定性.     

高浓度聚合氯化铝的合成及其形态分布与转化规律

以CaO为碱化剂采用一次加碱法合成了高浓度聚合氯化铝(PAC),研究了其反应特性及产品的铝形态分布与转化规律.结果表明,CaO特殊的水化反应可使PAC达到较高浓度和较高B值,PAC最高浓度可达2.1mol/L,B值为2.1.合成过程中无论高铝浓度体系还是低铝浓度体系,均存在一最佳B值,此B值下产品的Al_b含量最高.最佳B值和最高Al_b含量均随总铝浓度的升高而降低.B值小于最佳B值时,总反应主要表现为生成Al_b;B值大于最佳B值时,总反应表现为生成Al_c.     

Simultaneous determination of iprodione,procymidone, and chlorflurenol in lake water and wastewater matrices by GC-MS after multivariate optimization of binary dispersive liquid-liquid microextraction

This study reports the optimization of a binary dispersive liquid-liquid microextraction method for the determination of iprodione, procymidone, and chlorflurenol by gas chromatography mass spectrometry. The study was aimed at using two extraction solvents to increase the extraction efficiency of all analytes. The binary solvents recorded results higher than the mono-solvents. After examining the effects of main experimental parameters and their interactions by analysis of variance, 200 μL of binary mixture (dichloromethane and 1,2-dichloroethane), 2.5 mL of ethanol, and 15 s vortex were obtained as optimum parameters. The detection and quantification limits calculated for the analytes were found to be between 0.30–1.6 and 1.0–5.3 ng/mL, respectively. Enhancement in detection power calculated as a ratio of the binary extraction detection limit to the detection limit of direct GC-MS analysis was 105-, 214-, and 233-fold for chlorflurenol, iprodione, and procymidone, respectively. In order to check the accuracy of the developed method, recovery study was performed. Water sampled from a lake and two wastewater samples from treatment facilities were spiked at two concentrations, and the percent recovery calculated for the samples ranged between 87 and 116%. These results confirmed the suitability of the method to real samples for accurate determination of the analytes at trace levels.     

徐州市钢铁企业大气污染影响评估

利用徐州市钢铁行业高分辨率排放清单,采用空气质量模式WRF-CALPUFF模拟并分析2017年徐州市钢铁行业大气污染物在冬、夏季对大气国控站点空气质量的贡献。结果表明,2017年徐州市钢铁企业排放主要大气污染物对大气国控点的ρ(PM2. 5)贡献最大达到10. 80μg/m3,对桃园路、铜山兽医院影响较大,其中一家企业的ρ(PM2. 5)贡献值就占了14家钢铁企业总贡献值的44. 33%;冬季的ρ(PM2. 5)贡献值总体上高于夏季,但不同钢铁企业在夏季和冬季对空气质量造成的影响存在一定的差异性,其中有5家企业在冬季的ρ(PM2. 5)贡献值明显高于夏季,而有2家企业的ρ(PM2. 5)贡献值在夏季高于冬季。     

Throughfall,stemflow, and interception characteristics of coniferous forest ecosystems in the western black sea region of Turkey (Daday example)

This study aims to identify precipitation, throughfall, stemflow, precipitation, and interception processes in pure black pine, pure Scots pine, and mixed black pine–Scots pine forest ecosystems and present the precipitation partitioning according to different stand types. Throughfall and stemflow measurements were performed using five standard precipitation gauges in a pilot area established to represent pure black pine, pure Scots pine, and mixed black pine–Scots pine stands in the Bezirgan Basin. The total precipitation was measured in an open field close to the study area. Throughfall values were calculated as the percentage of precipitation measured in an open field. According to the results of the study, the throughfall values were 69.8% in black pine, 73.9% in Scots pine, and 77.7% in the mixed black pine–Scots pine stands; the stemflow values were 2.6% in black pine, 5.9% in Scots pine, and 3.1% in the mixed black pine–Scots pine stands; the amounts of precipitation reaching the forest floor were 72.3% in black pine, 79.8% in Scots pine, and 80.7% in the mixed black pine–Scots pine stands; and the interception values were found to be 27.7% in black pine, 20.2% in Scots pine, and 19.2% in the mixed black pine–Scots pine stands.     

Land degradation a matter of attitude? A case study from southern Transylvania (Romania)

A better public perception and knowledge on land degradation increases the individual and collective responsibility in land use and land management. Based on interviews, this paper presents results of evaluation of public perception and attitude towards degrading phenomena in the central part of Romania, an area prone to geomorphologic processes, with different land uses and a high proportion of degraded land. The research reveals natural causes, improper land use, categories of land owned, socio-economic causes and involvement of institutions as key aspects of public perception. Our research could be useful in the identification and design of measures in regional planning to attract population in prevention, mitigation and rehabilitation actions on degraded land.     

Heavy Metal Pollution of Surface Soil in the Thrace Region, Turkey

Abstact Samples of surface soil were collected at 73 sites in the Thrace region, northwest part of Turkey. Two complementary analytical techniques, epithermal neutron activation analysis (ENAA) and atomic absorption spectrometry (AAS) with flame and graphite furnace atomization were used to determine 35 elements in the soil samples. Concentrations of As, Cd, Co, Cu, Mn, Ni, Pb and Zn were determined using AAS and GF AAS, and ENAA was used for the remaining 27 elements. Results for As, Ba, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu Eu, Fe, Hf, I, In, K, La, Mn, Mo, Na, Nd, Ni, Pb, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, Ti, U, V and Zn are reported for the first time for soils from this region. The results show that concentrations of most elements were little affected by the industrial and other anthropogenic activities performed in region. Except for distinctly higher levels of Pb, Cu, Cd and Zn in Istanbul district than the median values for the Thrace region, the observed distributions seem to be mainly associated with lithogenic variations. Spatial distributions of As, Cd, Cr, Cu, Ni, Pb and Zn were plotted in relation to the concentration values in soil using Geographic Information System (GIS) technology     

Seasonal variation, sources, and gas/particle concentrations of PCBs and OCPs at high altitude suburban site in Western Black Sea Region of Turkey

Daily gas and particle phase samples were collected during winter and summer seasons in Bolu, which is located in the high altitude Western Black Sea Region of Turkey. Samples were analyzed to determine the concentrations of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). Concentrations of endosulfan sulfate and methoxychlor were found to be highest in the summer and winter periods, respectively. The measured average concentration of endrin was considerably higher (10-50 fold) than the values reported in the literature for similar sites. The agricultural areas located to the south, south-east and south-west of the sampling point were identified as source regions. PCBs were found predominantly in the gas phase in both seasons and 3-chlorinated biphenyls were found to be abundant in the winter period, due to pollutants transported from the city centre and a waste incineration plant by southerly and easterly winds. The concentrations of PCB-180 and PCB-194 were found to be higher than values reported in the literature. The correlation between atmospheric concentrations and temperature was obtained by using Clausius-Clapeyron (CC) plots. The CC plots for most of the OCPs showed shallow negative slopes with low r(2) values, which might be due to the presence of local sources, i.e., agricultural areas around the sampling site and the dominance of evaporation. The CC plots showed steep positive slopes for most of the PCB compounds. Most of the PCB compounds were carried from the ongoing local sources.