Bench-scale evaluation of treatment schemes incorporating struvite precipitation for young landfill leachate

In this study, landfill leachate treatment technologies alternative to anaerobic treatment were experimentally investigated. The emphasis was placed upon nitrogen removal through the use of struvite precipitation. Treatment technologies studied included struvite precipitation, low pH (acidic) air stripping, and activated sludge. Dilution of landfill leachate was used as a means to obtain appropriate quality for feeding the activated sludge process in some instances. Five main treatment combinations were applied. The first and second schemes were struvite precipitation followed by activated sludge process which was fed on undiluted and diluted (1:5) effluents. The third scheme was dilution, activated sludge and struvite precipitation. The fourth alternative was acidic air stripping, struvite precipitation and activated sludge process. The fifth scheme was acidic air stripping, activated sludge and struvite precipitation. All treatment schemes provided comparable COD and ammonia removals, all being around 90%. The treatment schemes incorporating the acidic air stripping, however, was found to be the most advantageous in terms of both efficiency and volume and aeration requirements of the activated sludge process since over 80% COD could be removed in the stripping step. Of the fourth and fifth alternative schemes, the fourth was the most efficient, providing 95% removal of both COD and ammonia. Initial dilution of the leachate at a 1:5 ratio was the least effective one, yielding 90% or lower removals for COD and ammonia. The first scheme, namely application of struvite precipitation to raw leachate followed by activated sludge with or without dilution, proved to be a practical system, providing over 85% COD and 99% ammonia removals. High organic loading up to 0.8 g COD/g VSS day was found to be applicable within this scheme.     

以TEOS为硅源的聚硅氯化铝絮凝剂的制备及其物化特征

采用TEOS为硅源合成制备了新型的聚硅氯化铝PASC(A),并与传统方法合成的聚硅氯化铝PASC(B) 做了比较,探讨了产品的pH值和Zeta电位随B值和Si/Al摩尔比的变化关系,并利用酸解反应和²⁷Al NMR研究了硅引入对PASC分子结构和铝形态的影响.结果表明,由于采用了特殊的合成方法,与PASC(B)相比,PASC(A)具有更高的聚合度,分子量分布并且分子中铝硅分布均匀,不易被酸解聚,而且有利于Al₁₃形态稳定性.     

高浓度聚合氯化铝的合成及其形态分布与转化规律

以CaO为碱化剂采用一次加碱法合成了高浓度聚合氯化铝(PAC),研究了其反应特性及产品的铝形态分布与转化规律.结果表明,CaO特殊的水化反应可使PAC达到较高浓度和较高B值,PAC最高浓度可达2.1mol/L,B值为2.1.合成过程中无论高铝浓度体系还是低铝浓度体系,均存在一最佳B值,此B值下产品的Al_b含量最高.最佳B值和最高Al_b含量均随总铝浓度的升高而降低.B值小于最佳B值时,总反应主要表现为生成Al_b;B值大于最佳B值时,总反应表现为生成Al_c.     

徐州市钢铁企业大气污染影响评估

利用徐州市钢铁行业高分辨率排放清单,采用空气质量模式WRF-CALPUFF模拟并分析2017年徐州市钢铁行业大气污染物在冬、夏季对大气国控站点空气质量的贡献。结果表明,2017年徐州市钢铁企业排放主要大气污染物对大气国控点的ρ(PM2. 5)贡献最大达到10. 80μg/m3,对桃园路、铜山兽医院影响较大,其中一家企业的ρ(PM2. 5)贡献值就占了14家钢铁企业总贡献值的44. 33%;冬季的ρ(PM2. 5)贡献值总体上高于夏季,但不同钢铁企业在夏季和冬季对空气质量造成的影响存在一定的差异性,其中有5家企业在冬季的ρ(PM2. 5)贡献值明显高于夏季,而有2家企业的ρ(PM2. 5)贡献值在夏季高于冬季。     

Cationic dye adsorption onto natural and synthetic zeolites in the presence of Cs+ and Sr2+ ions

Adsorption of diazine dye safranine O (SO) in the presence of Cs⁺ and Sr²⁺ ions was investigated onto natural and synthetic zeolites in order to predict competition of cationic organic species with their radionuclides, which are the main fission products released into the environment. Adsorption of SO was measured up to the 40th day and the surface-diffusion coefficients (D_s) were estimated by applying Nernst–Planck approximation based on a homogeneous-surface-diffusion model. The values of D_s were 10 times higher on natural zeolite than those of synthesized zeolite from fly ash (FA) under hydrothermal conditions. Similarly, distribution coefficients (K_D) were considerably higher on the clinoptilolite-type natural zeolite. The zeolitized product of FA is mainly composed of analcime and sodalite. SO adsorption on natural zeolite was not influenced by Cs⁺ and Sr²⁺ ions, but it decreased at high concentrations on synthetic zeolite. The higher influence of the Sr²⁺ ions on SO⁺ adsorption showed that they compete with each other for the same adsorption sites. These results suggested that natural zeolite cannot be used for remediation of wastewater polluted with Cs and Sr radionuclides in the presence of organic cations, whilst FA zeolite has a potential for Sr removal.     

Generation lengths of the world's birds and their implications for extinction risk

Birds have been comprehensively assessed on the International Union for Conservation of Nature (IUCN) Red List more times than any other taxonomic group. However, to date, generation lengths have not been systematically estimated to scale population trends when undertaking assessments, as required by the criteria of the IUCN Red List. We compiled information from major databases of published life-history and trait data for all birds and imputed missing life-history data as a function of species traits with generalized linear mixed models. Generation lengths were derived for all species, based on our modeled values of age at first breeding, maximum longevity, and annual adult survival. The resulting generation lengths varied from 1.42 to 27.87 years (median 2.99). Most species (61%) had generation lengths <3.33 years, meaning that the period of 3 generations—over which population declines are assessed under criterion A—was <10 years, which is the value used for IUCN Red List assessments of species with short generation times. For these species, our trait-informed estimates of generation length suggested that 10 years is a robust precautionary value for threat assessment. In other cases, however, for whole families, genera, or individual species, generation length had a substantial impact on their estimated extinction risk, resulting in higher extinction risk in long-lived species than in short-lived species. Although our approach effectively addressed data gaps, generation lengths for some species may have been underestimated due to a paucity of life-history data. Overall, our results will strengthen future extinction-risk assessments and augment key databases of avian life-history and trait data.     

Interactions between environment, species traits, and human uses describe patterns of plant invasions

Although invasive alien species (IAS) are a major threat to biodiversity, human health, and economy, our understanding of the factors controlling their distribution and abundance is limited. Here, we determine how environmental factors, land use, life-history traits of the invaders, residence time, origin, and human usage interact to shape the spatial pattern of invasive alien plant species in South Africa. Relationships between the environmental factors and the extrinsic and intrinsic attributes of species were investigated using RLQ analysis, a multivariate method for relating a species-attribute table to an environmental table by way of a species presence/absence table. We then clustered species according to their position on the RLQ axes, and tested these groups for phylogenetic independence. The first three axes of the RLQ explained 99% of the variation and were strongly related to the species attributes. The clustering showed that, after accounting for environmental factors, the spatial pattern of IAS in South Africa was driven by human uses, life forms, and reproductive traits. The seven clusters of species strongly reflected geographical distribution, but also intrinsic species attributes and patterns of human use. Two of the clusters, centered on the genera Acacia and Opuntia, were phylogenetically non-independent. The remaining clusters comprised species of diverse taxonomic affinities, but sharing traits facilitating invasion in particular habitats. This information is useful for assessing the extent to which the potential spread of recent introductions can be predicted by considering the interaction of their biological attributes, region of origin, and human use.     

Life cycle assessment of municipal solid waste management methods: Ankara case study

Different solid waste management system scenarios were developed and compared for the Municipal Solid Waste Management System of Ankara by using the life cycle assessment (LCA) methodology. The solid waste management methods considered in the scenarios were collection and transportation of wastes, source reduction, Material Recovery Facility (MRF)/Transfer Stations (TS), incineration, anaerobic digestion and landfilling. The goal of the study was to determine the most environmentally friendly option of MSWM system for Ankara. The functional unit of the study was the amount of solid waste generated in the system area of concern, which are the districts of Ankara. The life cycle inventory analysis was carried out by IWM Model-1. The inputs and outputs of each management stage were defined and the inventory emissions calculated by the model were classified in to impact categories; non-renewable energy sources exhausting potential, final solid waste as hazardous and non-hazardous, global warming, acidification, eutrophication and human toxicity. The impacts were quantified with the weighing factors of each category to develop the environmental profiles of each scenario. In most of the categories, Source Reduction Scenario was found to be the most feasible management method, except the global warming category. The lowest contribution to GWP was calculated for the anaerobic digestion process. In the interpretation and improvement assessment stage, the results were further evaluated and recommendations were made to improve the current solid waste management system of Ankara.     

Cadmium exposure from the cement dust emissions: a field study in a rural residence

The cement dust is one of the causes of pollution in the environment. In the present study, the cadmium concentrations of soil and plant specimens taken from a rural area exposed to cement factory emissions were determined and also the blood concentrations and sensitivity conditions in humans residing in this rural area were investigated. The 108 soil (36 for control) and plant specimens were collected from eight different directions of the cement plant located in Cukurhisar town in Eski?ehir city. Blood samples of the individuals residing in this area were taken from 258 subjects (258 for control) following a physical examination, and patch tests were also applied. The results show that the cadmium concentrations of the soil and plant specimens taken from different places in different directions of the factory were higher than in the control areas. The physical examination of subjects did not reveal results different from those of the control group except for the diagnosis of contact dermatitis. The analysis of venous blood samples showed that cadmium concentrations were found to be within the reference values given for both groups, but higher in the subjects (p<0.001). According to the results of patch tests, sensitivity to cadmium was found to be more frequent for the subject group than the control group (p<0.05). Those results show that, although clinical tools revealed no toxic effects for the subject, except contact dermatitis, the cement plant increases cadmium pollution on the surrounding environment.     

Trace metals solubility in rainwater: evaluation of rainwater quality at a watershed area, Istanbul

In this study, 79 bulk precipitation samples were collected at two sampling sites near Büyükçekmece Lake, one of the important drinking water sources of Istanbul, for the period of October 2001 to July 2002. The study comprised the determination of trace and toxic metals concentrations in rain water. The concentrations of the metals in this study were found to be higher than those reported by other researchers around the world. The solubility of toxic metals was found in the order of Cd > Cu > V > Zn > Ni > Pb > Cr. Solubility of metals under acidic conditions (pH < 5.5) was approximately five times higher than those under neutral conditions with Cd as the most soluble metal (50% soluble). Statistical evaluations including seasonal variations, crustal enrichment factors, and correlation matrix were discussed to identify the possible sources of these pollutants. The study revealed that anthropogenic elements were highly enriched especially for Cd > Cu > Pb which were found to be highly enriched. Significant portion of Cu and Pb could be increased by the effect of local sources like cement industry in the area; however, the rest of the investigated trace metals could be brought to the sampling site by long-range transport to the Büyükçekmece Lake watershed area.