Analysis of environmental impact assessment (EIA) system in Turkey

The Environmental Impact Assessment (EIA) System, which embodies the ??prevention principle?? of the environmental law, is an important tool for environmental protection. This tool has a private importance for Turkey since it is a developing country, and it entered the Turkish law in 1983 with the Environmental Law. Besides, the EIA Regulation, which shows the application principles, became effective in 1993. Because Turkey is a candidate for European Union (EU), the EIA Regulation has been changed due to the EU compliance procedure, and its latest version became valid in 2008. This study aims to emphasize The EIA system in Turkey to supervise the efficiency of this procedure and point the success level. In the introduction part, general EIA concept, its importance, and some notations are mentioned. Following that, the legislation, which builds the EIA system, has been analyzed starting from the 1982 Turkish Constitution. Then, the legislation rules are explained due to the basic steps of the EIA procedure. In order to shed light upon the application, the EIA final decisions given until today, the results, and their distributions to the industries are assessed. In the final part of the study, a SWOT analysis is made to mention the weaknesses, strengths, opportunities, and threats of the EIA system in Turkey.     

Geographic information system–assisted site quality assessment for hazelnut cultivation using multi-criteria decision analysis in the Black Sea region,Turkey

Environmental Science and Pollution Research - Developing land suitability models for strategically critical agricultural products to expand sustainable agricultural policies and sensitive...     

A review of plastic pollution in aquatic ecosystems of Turkey

Environmental Science and Pollution Research - Turkey is one of the major plastic pollution sources in the Mediterranean and the Black Sea. This review summarizes present information, data, and...     

Wet oxidation: a pre-treatment procedure for sludge

Wet oxidation process is specially effective for wastes with a high organic matter which can not be removed by conventional treatment methods. The digested and raw activated sludges of PAKMAYA yeast factory are treated by wet oxidation process. The liquid-phase organic matter concentration [as total organic carbon (TOC)] was increased by 16.5% in 10 min during the wet oxidation in the presence of Cu as catalyst and H2O2. Lenghtening the period of the wet oxidation, the TOC-concentration was increased by 66% in 120 min. The biodegradability of the sludge after wet oxidation process was also examined. A very little development in the biodegradability was observed, when wet oxidation was applied as pre-treatment to the digested sludge (5% decrease as TOC, in the presence of Cu catalyst and H2O2). However, in the case of digestion of the raw sludge after the application of wet oxidation, the biodegradability increased significantly (approximately 75%, as TOC). Moreover, wet oxidation improved the ability of settling of sludge solids, as well as enhancing the treatment efficiency. Finally, the volume of settled solids was decreased by 80% in the presence of Cu and H2O2. NH3+-N, NO2(-)-N and NO3(-)-N concentrations in the supernatant decreased with the wet oxidation. pH value of the sludge increased from 6.6 to 7.8-8.0. Since stable sludge was taken from the digester where the nitrification process was progressing, a decrease in the nitrite concentration, with an increase in nitrate was observed in the digestion continuing after the wet oxidation pre-treatment. However, in the raw activated sludge, there was a nitrite formation only in the non-pretreated sludge.     

A familial Xp+ chromosome detected during fetal karyotyping,which is associated with short stature in four generations of a Turkish family

The short-stature homeobox-containing gene (SHOX) on chromosome Xp22.3 was recently identified as an important determinant of the stature phenotype. Deletions of the SHOX gene, some of them due to structural chromosome abnormalities, have been described in patients with idiopathic short stature and Leri-Weill syndrome. Additionally, haploinsufficiency of SHOX is a main cause for short stature seen in patients with Turner syndrome. Here we report an unusual X-chromosome abnormality, which was detected during a fetal karyotyping performed because of a previous child with Down syndrome. GTG banding demonstrated an extra chromosome segment on the terminal part of the short arm of chromosome X in the index case (karyotype: 46,X,Xp+). The same chromosomal abnormality was found in the mother and the maternal grandmother. All carriers of this chromosomal abnormality presented with short stature but no other associated symptoms. Whole chromosome painting of X revealed a homogeneous painting of the abnormal X chromosome indicating that no other chromosome was involved. Additional FISH studies with probe DXS1140 (Kallmann probe at Xp22.3), Quint-Essential X-Specific DNA (DMD probe at Xp21.2), XIST (at Xq13.2), and Tel Xq/Yq were performed, and no abnormality was observed in the intensities or the localizations of the probes signals. However, applying a specific SHOX gene probe (derived from cosmid LLNONO3M34F5) showed a loss of signal on the derivative X chromosome. Our results show that the Xp+ generation led to a deletion of the complete SHOX gene and caused short stature in the presented family. Copyright © 2003 John Wiley & Sons, Ltd.     

Site selection for waste vegetable oil and waste battery collection boxes: a GIS-based hybrid hesitant fuzzy decision-making approach

Environmental Science and Pollution Research - The amount of municipal solid waste (MSW) has been increasing rapidly in the urban centres of developing countries during the last few decades;...     

A case study on the historical peninsula of Istanbul based on three-dimensional modeling by using photogrammetry and terrestrial laser scanning

Terrestrial laser scanning is a popular methodology that is used frequently in the process of documenting historical buildings and cultural heritage. The historical peninsula region sprawls over an area of approximately 1,500 ha and is one of the main aggregate areas of the historical buildings in Istanbul. In this study, terrestrial laser scanning and close range photogrammetry techniques are integrated into each other to create a 3D city model of this part of Istanbul, including some of the buildings that represent the most brilliant areas of Byzantine and Ottoman Empires. Several terrestrial laser scanners with their different specifications were used to solve various geometric scanning problems for distinct areas of the subject city. Photogrammetric method was used for the documentation of the facades of these historical buildings for architectural purposes. This study differentiates itself from the similar ones by its application process that focuses on the geometry, the building texture, and density of the study area. Nowadays, the largest-scale studies among 3D modeling studies, in terms of the methodology of measurement, are urban modeling studies. Because of this large scale, the application of 3D urban modeling studies is executed in a gradual way. In this study, a modeling method based on the facades of the streets was used. In addition, the complimentary elements for the process of modeling were combined in several ways. A street model was presented as a sample, as being the subject of the applied study. In our application of 3D modeling, the modeling based on close range photogrammetry and the data of combined calibration with the data of terrestrial laser scanner were used in a compatible way. The final work was formed with the pedestal data for 3D visualization.     

Cadmium exposure from the cement dust emissions: a field study in a rural residence

The cement dust is one of the causes of pollution in the environment. In the present study, the cadmium concentrations of soil and plant specimens taken from a rural area exposed to cement factory emissions were determined and also the blood concentrations and sensitivity conditions in humans residing in this rural area were investigated. The 108 soil (36 for control) and plant specimens were collected from eight different directions of the cement plant located in Cukurhisar town in Eski?ehir city. Blood samples of the individuals residing in this area were taken from 258 subjects (258 for control) following a physical examination, and patch tests were also applied. The results show that the cadmium concentrations of the soil and plant specimens taken from different places in different directions of the factory were higher than in the control areas. The physical examination of subjects did not reveal results different from those of the control group except for the diagnosis of contact dermatitis. The analysis of venous blood samples showed that cadmium concentrations were found to be within the reference values given for both groups, but higher in the subjects (p<0.001). According to the results of patch tests, sensitivity to cadmium was found to be more frequent for the subject group than the control group (p<0.05). Those results show that, although clinical tools revealed no toxic effects for the subject, except contact dermatitis, the cement plant increases cadmium pollution on the surrounding environment.