Effect of progressive drought stress on growth,leaf gas exchange,and antioxidant production in two maize cultivars

Environmental Science and Pollution Research - Drought stress is one of the major environmental factors responsible for reduction in crop productivity. In the present study, responses of two maize...     

A reassessment of energy and GDP relationship: the case of Australia

This paper investigates the long- and short-run relationships between energy consumption and economic growth in Australia using the bound testing and the ARDL approach. The analytical framework utilized in this paper includes both production and demand side models and a unified model comprising both production and demand side variables. The energy–GDP relationships are investigated at aggregate as well as several disaggregated energy categories, such as coal, oil, gas and electricity. The possibilities of one or more structural break(s) in the data series are examined by applying the recent advances in techniques. We find that the results of the cointegration tests could be affected by the structural break(s) in the data. It is, therefore, crucial to incorporate the information on structural break(s) in the subsequent modelling and inferences. Moreover, neither the production side nor the demand side framework alone can provide sufficient information to draw an ultimate conclusion on the cointegration and causal direction between energy and output. When alternative frameworks and structural break(s) in time series are explored properly, strong evidence of a bidirectional relationship between energy and output can be observed. The finding is true at both the aggregate and the disaggregate levels of energy consumption.     

Droplet size spectra and deposits of Bacillus thuringiensis aerial sprays,following application at two volume rates over an oak forest

Abstract

Dipel® 8AF, a commercial formulation of Bacillus thuringiensis (B.t.) was sprayed undiluted at 30 BIU in 1.8L/ha over a block B1, and sprayed after dilution with water at 30 BIU in 6.2 L/ha over another block B2 in an oak forest infested with the gypsy moth (Lymantria dispar L.) in southeastern Ontario, Canada. Spray was applied in May 1987 using a Cessna 188 Agtruck aircraft equipped with four Hicronair^® AU4000 atomizers. Droplet sizes were measured at mid‐canopy level of oak trees and at ground level using cylindrical Kromekote® cards. Deposit per unit area was assessed on aluminum oak leaves.

At the lower volume rate of 1.8 L/ha, spray droplets were smaller and droplets/cm² were lower on the cylindrical Kromekote cards in B1 than those obtained in B2 which received the higher volume rate of 6.2 L/ha. The average deposit per unit area of the aluminum oak leaves, expressed in nL of the spray volume per cm² surface area, was also correspondingly lower in B1 than in B2. This was attributed to the higher volume rate of spray application used in B2 than in B1, which resulted in larger droplets and a greater volume deposit/cm² in B2.     

Physicochemical characterization of industrial effluents and their effect on fish survival

Abstract

Water samples taken from selected industrial drainages and receiving streams in and around Islamabad, Pakistan, during the summers of 1987 to 1990 showed disturbances in pH and low oxygen levels. Selected metals (Fe, Pb, Zn, Cd, Cu, Ni, Hg) were higher in all effluents than in receiving waters. Static bioassays of the undiluted industrial effluents from three sites caused 100% mortality in carp during the first 24 hrs. Fishes also suffered 30 to 60% mortality when exposed to other undiluted industrial effluents and some mortality when industrial effluents were diluted by 50%.     

Influence of surfactant concentration on foliar retention of pesticides used in forestry

Abstract

Aqueous tank mixes of permethrin, fenitrothion, Bacillus thuringiensis (B.t.), diflubenzuron (DFB), and glyphosate containing different amounts of Triton® X‐114, a nonionic surfactant, were prepared. Glyphosate formed clear solutions, permethrin and fenitrothion formed emulsions, DFB and B.t provided suspensions. Emulsion stability of permethrin and fenitrothion increased with increasing surfactant level, while the emulsion drop size decreased.

Foliage of white oak, trembling aspen, white spruce and balsam fir were dipped in tank mixes of pesticides (except B.t.) labelled with ¹⁴carbon. The amount of pesticide retained on foliage was determined by liquid scintillation counting. Foliage was also dipped in non‐radioactive B.t. tank mixes, and the protein retained was determined colorimetrically. With all tank mixes, a direct relationship was observed between the mass of liquids retained on foliage and liquid viscosity. In contrast, the amount of pesticide retained was unaffected by viscosity, but was influenced by emulsion drop size. Initially, the amount of pesticide retained on foliage increased with increasing surfactant concentration. Beyond an optimum surfactant level, the emulsion drop sizes were too small and the emulsions became too stable to allow maximum retention of pesticides on foliage. With the glyphosate solutions, however, no optimum surfactant level was indicated because foliar concentrations continued to increase with increasing surfactant levels.     

Use of Membrane Collectors in Electrostatic Precipitators

ABSTRACT

Membrane collection surfaces, developed and patented by researchers at Ohio University, were used to replace steel plates in a dry electrostatic precipitator (ESP). Such replacement facilitates tension-based rapping, which shears the adhered particle layer from the collector surface more effectively than hammer-based rapping. Tests were performed to measure the collection efficiency of the membranes and to quantify the potential improvements of this novel cleaning technique with respect to re-entrainment. Results indicate that even semiconductor materials (e.g., carbon fibers) collect ash nearly as efficiently as steel plates, potentially indicating that collection surface resistivity is primarily dictated by the accumulated ash layer and not by the underlying plate conductivity. In addition, virtually all sheared particles separated from the collecting membranes fell within the boundary layer of the membrane, indicating extremely low potential for re-entrainment.     

Evaluation of fungal potentiality for bioconversion of domestic wastewater sludge

This study was undertaken to screen the filamentous fungi isolated from its relevant habitats (wastewater, sewage sludge and sludge cake) for the bioconversion of domestic wastewater sludge. A total of 35 fungal strains were tested against wastewater sludge (total suspended solids, TSS 1%-5% w/w) to evaluate its potentiality for enhancing the biodegradability and dewaterability using liquid state bioconversion(LSB) process. The strains were divided into five groups i. e. Penicillium, Aspergillus, Trichoderma, Basidiomycete and Miscellaneous, respectively. The strains WWZP1003, SCahmA103, SCahmT105 and PC-9 among their respective groups of Penicillium,Aspergillus, Trichoderma and Basidiomycete played potential roles in terms of separation (formation of pellets/flocs/filaments),biodegradation(removal of COD) and filtration(filterability) of treated domestic wastewater sludge. The Miscellaneous group was not considered due to its unsatisfactory results as compared to the other groups. The pH value was also influenced by the microbial treatment during fermentation process. The filterability of treated sludge was improved by fungal treatment, and lowest filtration time was recorded for the strain WWZP1003 and SCahmA103 of Penicillium and Aspergillus groups respectively compared with other strains.     

Environmental implications of soil remediation using the Fenton process

This work evaluates some collateral effects caused by the application of the Fenton process to 1,1-bis(4-chlorophenyl)-2,2,2-trichloroethane (DDT) and diesel degradation in soil. While about 80% of the diesel and 75% of the DDT present in the soil were degraded in a slurry system, the dissolved organic carbon (DOC) in the slurry filtrate increased from 80 to 880mgl(-1) after 64h of reaction and the DDT concentration increased from 12 to 50microgl(-1). Experiments of diesel degradation conducted on silica evidenced that soluble compounds were also formed during diesel oxidation. Furthermore, significant increase in metal concentrations was also observed in the slurry filtrate after the Fenton treatment when compared to the control experiment leading to excessive concentrations of Cr, Ni, Cu and Mn according to the limits imposed for water. Moreover, 80% of the organic matter naturally present in the soil was degraded and a drastic volatilization of DDT and 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene was observed. Despite the high percentages of diesel and DDT degradation in soil, the potential overall benefits of its application must be evaluated beforehand taking into account the metal and target compounds dissolution and the volatilization of contaminants when the process is applied.     

Estimation and comparison of night-time OH levels in the UK urban atmosphere using two different analysis methods

Night-time OH levels have been determined for UK urban surface environments using two methods,the decay and steady state approximation methods.Measurement data from the UK National Environmental Technology Centre archive for four urban sites(Bristol,Harwell,London Eltham and Edinburgh) over the time period of 1996 to 2000 have been used in this study.Three reactive alkenes,namely isoprene,1,3-butadiene and trans-2-pentene were chosen for the calculation of OH levels by the decay method.Hourly measurements o...