Controlling various contaminants in wastewater effluent through membranes and engineered wetland

For effective wastewater reclamation and water recovery, the treatment of natural and effluent organic matters (NOM and EfOM), toxic anions, and micropollutants was considered in this work. Two different NOM (humic acid of the Suwannee River, and NOM of US and Youngsan River, Korea), and one EfOM from the Damyang wastewater treatment plant, Korea, were selected for investigating the removal efficiencies of tight nanofiltration (NF) and ultrafiltration (UF) membranes with different properties. Nitrate, bromate, and perchlorate were selected as target toxic anions due to their well known high toxicities. Tri-(2-chloroethyl)-phosphate (TCEP), oxybenzone, and caffeine, due to their different K _ow and pK _a values, were selected as target micropollutants. As expected, the NF membranes provided high removal efficiencies in terms of all the tested contaminants, and the UF membrane provided fairly high removal efficiencies for anions (except for nitrate) and the relatively hydrophobic micropollutant, oxybenzon. Through the wetlands, nitrate was successfully removed. Therefore, a fair process of combining membranes with an engineered wetland could be proposed for sustainable wastewater reclamation and optimum control of contaminats.     

Self-build packed-bed bioreactor for rapid and effective BOD estimation

This work demonstrated a simple, low-cost, rapid, and effective biochemical oxygen demand (BOD) estimation system based on a packed-bed bioreactor that can be easily self-built on-site at a particular wastewater treatment plant for continuous monitoring of the influent and effluent. The use of natural microbial consortium that were collected from the target wastewater and immobilized on a cheap porous carrier simply by adhesion resulted in an acceptable accuracy of over 95%. The newly developed semi-continuous operating mode with peak-type signals was shown to be able to continuously estimate BOD at a high flow rate to overcome the flow dependence of the oxygen electrode, limit clogging issues, enhance the response time, and lower the limit of detection. The resulting packed-bed bioreactors could work continuously for 22 h with a coefficient of variance (CoV) of only 1.8% or for 13 h a day for several days with a maximum CoV of 1.4% and their response was observed to be stable over 80 consecutive measurements. They exhibited stable responses at a wide pH range of 6.5–8.5, which is also the recommended range for aerobic wastewater treatment, emphasizing the greater ease of use of natural microorganisms for BOD estimation.

     

Heavy Metal Pollution of Surface Soil in the Thrace Region, Turkey

Abstact Samples of surface soil were collected at 73 sites in the Thrace region, northwest part of Turkey. Two complementary analytical techniques, epithermal neutron activation analysis (ENAA) and atomic absorption spectrometry (AAS) with flame and graphite furnace atomization were used to determine 35 elements in the soil samples. Concentrations of As, Cd, Co, Cu, Mn, Ni, Pb and Zn were determined using AAS and GF AAS, and ENAA was used for the remaining 27 elements. Results for As, Ba, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu Eu, Fe, Hf, I, In, K, La, Mn, Mo, Na, Nd, Ni, Pb, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, Ti, U, V and Zn are reported for the first time for soils from this region. The results show that concentrations of most elements were little affected by the industrial and other anthropogenic activities performed in region. Except for distinctly higher levels of Pb, Cu, Cd and Zn in Istanbul district than the median values for the Thrace region, the observed distributions seem to be mainly associated with lithogenic variations. Spatial distributions of As, Cd, Cr, Cu, Ni, Pb and Zn were plotted in relation to the concentration values in soil using Geographic Information System (GIS) technology     

Integrated assessment of brick kiln emission impacts on air quality

This paper presents monitoring results of daily brick kiln stack emission and the derived emission factors. Emission of individual air pollutant varied significantly during a firing batch (7 days) and between kilns. Average emission factors per 1,000 bricks were 6.35–12.3 kg of CO, 0.52–5.9 kg of SO₂ and 0.64–1.4 kg of particulate matter (PM). PM emission size distribution in the stack plume was determined using a modified cascade impactor. Obtained emission factors and PM size distribution data were used in simulation study using the Industrial Source Complex Short-Term (ISCST3) dispersion model. The model performance was successfully evaluated for the local conditions using the simultaneous ambient monitoring data in 2006 and 2007. SO₂ was the most critical pollutant, exceeding the hourly National Ambient Air Quality Standards over 63 km² out of the 100-km² modelled domain in the base case. Impacts of different emission scenarios on the ambient air quality (SO₂, PM, CO, PM dry deposition flux) were assessed.     

Biogas production from olive pomace

Biogas production from a slurry obtained by mixing finely ground olive pomace in water was investigated using anaerobic digesters of 1-l working volume at 37°C. A start-up culture was obtained from a local landfill area and was adopted to the slurry within 10 days at this temperature. The biogas generation rates were determined by varying the total solids (TS) concentration in the slurry and the hydraulic retention time (HRT) during semi-continuous digestion. The maximum rate was found to be 0.70 l of biogas per l of digester volume per day, corresponding to a HRT of 20 days and 10% TS with a yield of 0.08 l biogas per g chemical oxygen demand (COD) added to the digester. The methane content of the biogas was in the range of 75–80% for both batch and semi-continuous runs, the remainder being principally carbon dioxide.     

Antibiotic contaminants in coastal wetlands from Vietnamese shrimp farming

Background and purpose  

Shrimp culture has been expanded rapidly in recent years in coastal wetland zone of Vietnam due to favorable natural conditions. However, this industry has caused several negative impacts to the environment. One of the critical issues is the excessive application of antibiotics including human medicines. These chemicals could be released from shrimp ponds and then accumulated and contaminated of the ecosystem. This review article discusses a whole range of findings that address various aspects of the usage, occurrence and potentially environmental risks of antibiotics released from shrimp farming, with emphasis on the South Vietnam coastal wetland.     

Designing ambient particulate matter monitoring program for source apportionment study by receptor modeling

Particulate matter (PM) receptor modeling requires specific intensive input data that is always a challenge to produce cost effectively. A well-designed monitoring program is important to collect such PM ambient data in urban areas with diverse and densely distributed sources. This paper presents a general framework for designing such a monitoring program while emphasizing appropriate quality assurance and quality control elements that are particularly applicable where limited resources are available. Topics for discussion include selection of monitoring sites, sampling and analytical techniques, and the uncertainty estimation for ambient concentration input data. The design framework is illustrated by a case study of a monitoring program for PM source apportionment in the Bangkok Metropolitan Region in which 24-h fine and coarse PM samples were collected using two collocated dichotomous samplers. Comparison between black carbon measurements by Smoke Stain reflectometry and Thermal Optical Transmittance method is highlighted.     

无机稳定剂处理重金属污染土壤

以重金属污染土壤为研究对象,比较了铁屑、蒙脱石、碳酸钙和羟基磷灰石4种稳定剂对土壤中Pb,Zn,Cd,Cu 4种重金属的稳定效果。实验结果表明,4种稳定剂稳定效率的大小顺序为：羟基磷灰石﹥碳酸钙﹥蒙脱石﹥铁屑。当稳定剂质量分数为10%时,羟基磷灰石、碳酸钙、蒙脱石和铁屑对Pb,Zn,Cd,Cu 4种重金属的平均稳定效率分别为99.63%,98.53%,97.15%,86.95 %。未加稳定剂时,土壤中的Pb以残渣态为主,Zn以残渣态和可交换态为主,Cd以残渣态为主,Cu以残渣态和可交换态为主;加入稳定剂后,土壤中4种金属可交换态的所占比例（简称占比）均显著降低,还原态的占比明显增大,残渣态的占比略有增大,氧化态的占比基本保持不变。     

Toxicity of imidazolium salt with anion bromide to a phytoplankton Selenastrum capricornutum: effect of alkyl-chain length

Room-temperature ionic liquids are regarded as environmentally benign alternatives to volatile organic solvents. However, the product designs for this promising group of compounds should take account, not only the technological needs, but also the eco-toxicological hazards. Therefore, this study aimed to evaluate the toxicity of some important ionic liquids on the growth of the freshwater alga, Selenastrum capricornutum. The ionic liquids examined in this study included 1-propyl-3-methylimidazolium [PMIM], 1-butyl-3-methylimidazolium [BMIM], 1-hexyl-3-methylimidazolium [HMIM] and 1-octyl-3-methylimidazolium [OMIM] with a bromide anion. The susceptibility of alga to ionic liquids was strongly dependent on the alkyl-chain length. According to our results, a longer alkyl-chain resulted in stronger inhibition of algal growth. In general, the toxicity could be summarized as decreasing in the following order: [OMIM]>[HMIM]>[BMIM]>or=[PMIM]. Among the ionic liquids examined, [OMIM] [Br] was found to be most toxic to S. capricornutum, with EC(50) values ranging from 26.3 microM to 54.9 microM after an incubating time of 96 h. Although [BMIM] [Br] and [PMIM] [Br] was relatively less toxic than [OMIM] and [HMIM], their toxicity increased as increasing the incubation time from 48 h to 96 h. This fact indicates that these kinds of ionic liquids may become more toxic after being released and contacted to freshwater ecosystem.