计算冲裁间隙的实用公式

此文按照冲裁间隙的传统计算公式及经验数据,总结出了冲裁模合理间隙的实用计算公式。     

SBR法后处理DTTA颜料中间体废水试验研究

采用SBR法处理DTTA颜料中间体废水,考察其废水处理效果,及曝气时间、pH值、进水COD等对处理效果的影响,结果表明,曝气时间6h、进水pH为7.0-8.5、进水COD为1000-2000 mg/L时,COD去除率达到71.3%-77.2%。     

絮凝体分形维数投药控制研究

依据分形理论，通过先进的图像分析处理技术，实现了对絮凝体分形维数的联机在线监测，试验证实分形维数可以很好地反映絮凝程度及其混凝处理效果，通过建立的混凝剂投加量、分形维数及沉后水浊度三者间的模糊控制模型，最终实现了对混凝剂投加量的自动控制与调节。     

论高速公路建设中的生态破坏及其恢复

探讨高速公路建设对生态与环境的影响,结合近几年国内外的研究成果和工作实践,对高速公路建设中的生态恢复理论、原则和技术展开讨论。可为有关建设项目中的生态恢复提供科学依据。     

弯头拉延模的设计

弯头是某产品上的关键零件之一,用冲模成形为最佳方案。此文分析弯头的拉延工艺性,介绍弯头拉延模的结构特点,并提出在设计、制造、使用弯头拉延模时应重视的几个问题。对成批生产同类零件的单位具有较高的参考价值。     

The status and distribution of PCBs along the coast of Vietnam

Environmental Geochemistry and Health - Polychlorinated biphenyls (PCBs), well-known as an important scientific achievement, are now considered as one of the most persistent organic pollutants...     

Photochemical smog modeling for assessment of potential impacts of different management strategies on air quality of the Bangkok Metropolitan Region, Thailand

A photochemical smog model system, the Variable-Grid Urban Airshed Model/Systems Applications International Mesoscale Model (UAM-V/SAIMM), was used to investigate photochemical pollution in the Bangkok Metropolitan Region (BMR). The model system was first applied to simulate a historical photochemical smog episode of two days (January 13-14, 1997) using the 1997 anthropogenic emission database available at the Pollution Control Department and an estimated biogenic emission. The output 1-hr ozone (O3) for BMR, however, did not meet the U.S. Environmental Protection Agency suggested performance criteria. The simulated minimum and maximum O3 values in the domain were much higher than the observations. Multiple model runs with different precursor emission reduction scenarios showed that the best model performance with the simulated 1-hr O3 meeting all the criteria was obtained when the volatile organic compound (VOC) and oxides of nitrogen (NOx) emission from mobile source reduced by 50% and carbon monoxide by 20% from the original database. Various combinations of anthropogenic and biogenic emissions in Bangkok and surrounding provinces were simulated to assess the contribution of different sources to O3 pollution in the city. O3 formation in Bangkok was found to be more VOC-sensitive than NOx-sensitive. To attain the Thailand ambient air quality standard for 1-hr O3 of 100 ppb, VOC emission in BMR should be reduced by 50-60%. Management strategies considered in the scenario study consist of Stage I, Stage II vapor control, replacement of two-stroke by four-stroke motorcycles, 100% compressed natural gas bus, 100% natural gas-fired power plants, and replacement of methyltertiarybutylether by ethanol as an additive for gasoline.     

安钢推行清洁生产的几点措施

在指出转变观念的基础上,介绍了安钢“九五”以来发展过程中推行清洁生产的主要举措;并通过“九五”末和2002年能耗与环保指标对比,说明清洁生产的经济性、科学性。进而提出大力推行清洁生产是企业生存发展的必然选择。     

楔块锁紧冲头压铆模的设计

通过对组件锁柱的工艺分析,确定了冲床压铆的可行性;介绍了斜楔锁紧冲头压铆模的工作过程和特点.     

Toxic Metals in the Austrian Pine (Pinus Nigra) Bark in the Thrace Region, Turkey

Austrian pine (Pinus nigra) bark was collected in thirty-seven localities in the Thrace region, Turkey, for the determination of airborne toxic metal distribution. Five toxic metals, As, Cd, Cu, Pb, and Zn, were monitored using atomic absorption spectrometry. Distribution maps of toxic elements in the region were plotted according to Geographic Information System technology. In general, the concentrations of all investigated elements were not high in the region apart from the vicinity of big cities, Tekirdag, Istanbul and, close to Bulgarian border. However, the highest concentrations were not at pollution level. They have a similar distribution pattern throughout the region.