Removal of dinitrotoluenes from water via reduction with iron and peroxidase-catalyzed oxidative polymerization: a comparison between Arthromyces ramosus peroxidase and soybean peroxidase

A two-step process for the removal of dinitrotoluene from water is presented: zero-valent iron reduction is coupled with peroxidase-catalyzed polymerization of the resulting diaminotoluenes (DAT). The effect of pH was examined in the reduction step: at pH 6 the reaction occurred much more rapidly than at pH 8. In the second step, optimal pH and substrate ratio, minimal enzyme concentration and effect of polyethylene glycol (PEG) as an additive for greater than 95% conversion of DAT, over a 3h reaction period were determined using high performance liquid chromatography. Two enzymes were investigated and compared: Arthromyces ramosus peroxidase (ARP) and soybean peroxidase (SBP). The optimal pH values were 5.4 and 5.2 for ARP and SBP, respectively, but SBP was more resistant to mild acid whereas ARP was more stable in neutral solutions. SBP was found to have a greater hydrogen peroxide demand (optimal peroxide/DAT molar ratio for SBP: 2.0 and 3.0 for 2,4-diaminotoluene (2,4-DAT) and 2,6-diaminotoluene (2,6-DAT), respectively; for ARP: 1.5 and 2.75 for 2,4-DAT and 2,6-DAT, respectively) but required significantly less enzyme (0.01 and 0.1 U ml(-1) for 2,4-DAT and 2,6-DAT, respectively) to convert the DAT than ARP (0.4 and 1.5 U ml(-1) for 2,4-DAT and 2,6-DAT, respectively). PEG was shown to have no effect upon the degree of substrate conversion for either enzyme.     

Effect of aluminum sulfate and cationic polyelectrolytes on the destabilization of emulsified wastes

Emulsified oil in wastewater constitutes a severe problem in the different treatment stages. Aluminum salts have been traditionally used as coagulants in wastewater treatments. Polyelectrolytes are used to coagulate and flocculate colloidal systems. The performance of aluminum sulfate in comparison to polyelectrolytes (chitosan and polyacrylamide) as conditioning chemicals for an emulsion waste was tested, and the predominant mechanisms acting in each case were analyzed. Turbidimetry, jar test, colloidal titration and microscopy were used to test emulsion destabilization. Both charge neutralization and bridge formation were identified and confirmed as mechanisms of interaction of polyelectrolytes with waste constitutents. Charge neutralization would be more important for chitosan than for polyacrylamide treatment. A coincidence between the doses necessary to reach zero colloidal charge and minimum turbidity was observed for polyelectrolytes. The time necessary to produce system clarification was larger for aluminum sulfate than for polyelectrolytes; this time was shortened for higher aluminum sulfate concentration. The pH showed a marked effect on aluminum sulfate performance with the optimum at pH 6; polyelectrolyte action was practically not affected by pH. Polyelectrolyte addition produced the minimum turbidity for the same doses that zero colloidal charge; at higher doses, emulsion was restabilized and became turbid again. However, aluminum sulfate treatment did not produce emulsion restabilization.     

Deriving freshwater quality criteria for copper,cadmium, aluminum and manganese for protection of aquatic life in Malaysia

Freshwater quality criteria for copper (Cu), cadmium (Cd), aluminum (Al), and manganese (Mn) were developed with particular reference to aquatic biota in Malaysia, and based on USEPA’s guidelines. Acute toxicity tests were performed on eight different freshwater domestic species in Malaysia, which were Macrobrachium lanchesteri (prawn), two fish – Poecilia reticulata and Rasbora sumatrana, Melanoides tuberculata (snail), Stenocypris major (ostracod), Chironomus javanus (midge larvae), Nais elinguis (annelid), and Duttaphrynus melanostictus (tadpole), to determine 96-h LC50 values for Cu, Cd, Al, and Mn. The final acute values (FAVs) for Cu, Cd, Al, and Mn were 2.5, 3.0, 977.8, and 78.3 μg L^?1, respectively. Using an estimated acute-to-chronic ratio (ACR) of 8.3, the value for final chronic value (FCV) was derived. Based on FAV and FCV, a Criterion Maximum Concentration (CMC) and a criterion Continuous Concentration (CCC) for Cu, Cd, Al, and Mn of 1.3, 1.5, 488.9, and 39.1 μg L^?1 and 0.3, 0.36, 117.8, and 9.4 μg L^?1, respectively, were derived. The results of this study provide useful data for deriving national or local water quality criteria for Cu, Cd, Al, and Mn based on aquatic biota in Malaysia. Based on LC50 values, this study indicated that R. sumatrana, M. lanchesteri, C. javanus, and N. elinguis were the most sensitive to Cu, Cd, Al, and Mn, respectively.     

Adsorption of natural organic matter from waters by iron coated pumice

Natural pumice particles were used as granular support media and coated with iron oxides to investigate their adsorptive natural organic matter (NOM) removal from waters. The impacts of natural pumice source, particle size fraction, pumice dose, pumice surface chemistry and specific surface area, and NOM source on the ultimate extent and rate of NOM removal were studied. All adsorption isotherm experiments were conducted employing the variable-dose completely mixed batch reactor bottle-point method. Iron oxide coating overwhelmed the surface electrical properties of the underlying pumice particles. Surface areas as high as 20.6m(2)g(-1) were achieved after iron coating of pumice samples, which are above than those of iron coated sand samples reported in the literature. For all particle size fractions, iron coating of natural pumices significantly increased their NOM uptakes both on an adsorbent mass- and surface area-basis. The smallest size fractions (<63 microm) of coated pumices generally exhibited the highest NOM uptakes. A strong linear correlation between the iron contents of coated pumices and their Freundlich affinity parameters (K(F)) indicated that the enhanced NOM uptake is due to iron oxides bound on pumice surfaces. Iron oxide coated pumice surfaces preferentially removed high UV-absorbing fractions of NOM, with UV absorbance reductions up to 90%. Control experiments indicated that iron oxide species bound on pumice surfaces are stable, and potential iron release to the solution is not a concern at pH values of typical natural waters. Based on high NOM adsorption capacities, iron oxide coated pumice may be a promising novel adsorbent in removing NOM from waters. Furthermore, due to preferential removal of high UV-absorbing NOM fractions, iron oxide coated pumice may also be effective in controlling the formation of disinfection by-products in drinking water treatment.     

Application of Adjoint Approach to Oil Spill Problems

Adjoint method is applied to various oil spill problems. A three-dimensional model for describing the dispersion of a quasi-passive substance (a pollutant or a nutrient) and its adjoint model are considered in a limited sea region. Direct and adjoint estimates are used to get dual (equivalent) estimates of the mean concentration of the substance in important zones of the region. The role of dual estimates is illustrated with a few examples. They include such oil spill problems as the search of the most dangerous point of the oil tanker route, the oil dispersion with a climatic velocity, and the dependence of the oil concentration estimates on the oil spill rate. One more example is the application of optimal bioremediation strategy for cleaning a few zones polluted by oil. In this case, instead of oil, the model describes the dispersion of a nutrient released to marine environment. Balanced, unconditionally stable second-order finite-difference schemes based on the splitting method for the solution of the dispersion model and its adjoint are suggested. The main and adjoint difference schemes are compatible in the sense that at every fractional step of the splitting algorithm, the one-dimensional split operators of both schemes satisfy a discrete form of Lagrange identity. In the special unforced and non-dissipative case, each scheme has two conservation laws. Every split one-dimensional problem is solved by Thomas’ factorization method.     

Acoustically detected year-round presence of right whales in an urbanized migration corridor

Species' conservation relies on understanding their seasonal habitats and migration routes. North Atlantic right whales (Eubalaena glacialis), listed as endangered under the U.S. Endangered Species Act, migrate from the southeastern U.S. coast to Cape Cod Bay, Massachusetts, a federally designated critical habitat, from February through May to feed. The whales then continue north across the Gulf of Maine to northern waters (e.g., Bay of Fundy). To enter Cape Cod Bay, right whales must traverse an area of dense shipping and fishing activity in Massachusetts Bay, where there are no mandatory regulations for the protection of right whales or management of their habitat. We used passive acoustic recordings of right whales collected in Massachusetts Bay from May 2007 through October 2010 to determine the annual spatial and temporal distribution of the whales and their calling activity. We detected right whales in the bay throughout the year, in contrast to results from visual surveys. Right whales were detected on at least 24% of days in each month, with the exception of June 2007, in which there were no detections. Averaged over all years, right whale calls were most abundant from February through May. During this period, calls were most frequent between 17:00 and 20:00 local time; no diel pattern was apparent in other months. The spatial distribution of the approximate locations of calling whales suggests they may use Massachusetts Bay as a conduit to Cape Cod Bay in the spring and as they move between the Gulf of Maine and waters to the south in September through December. Although it is unclear how dependent right whales are on the bay, the discovery of their widespread presence in Massachusetts Bay throughout the year suggests this region may need to be managed to reduce the probability of collisions with ships and entanglement in fishing gear.     

Book reviews and notices

The aim of sustainable development is to balance social, economic, and environmental needs. In order to justify the decisions they make, stakeholders must quantify the different impacts found in the operations and developments of companies and/or projects throughout their life cycle. However, as some areas are subjective in nature, the quantification process of the different impacts and the assessment of sustainable development performance become arduous tasks of development, validation, and application of scientific and empirical methods with the intrinsic objective of finding an agreement among the involved parties (i.e., stakeholders). Several environmental and sustainability assessment tools, instruments, processes, and methodologies have been developed; rating systems stand out and have gained attention and credibility, as demonstrated by the vast number of certified projects around the world and the widely-known usefulness and advantages of their application. The Wa-Pa-Su project sustainability rating system presents an integrated approach to sustainability assessment by integrating three distinctive areas of knowledge: (1) sustainable development theory and fundamentals supports the ultimate goal of the rating system, which is to contribute to sustainability, with the aim of finding a path to balance social, economic, and environmental needs; (2) continual performance improvement becomes essential due to the duration of the projects, as it is critical to allow organizations or projects to improve performance over time; and (3) multi-criteria decision analysis assists with the assessment process through stakeholder engagement and participation, and the design and implementation of a criteria weighting system.     

Pt/Mg-Ce-O catalyst for NO/H<Subscript>2</Subscript>/O<Subscript>2</Subscript> lean de-No<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> reaction

The NO/H₂/O₂ reaction was studied under oxidizing conditions in the 100-400 °C range over 0.1 wt% Pt supported on various metal oxides such as MgO, CeO₂, SiO₂, La₂O₃, CaO, Y₂O₃ and TiO₂. The Pt/MgO and Pt/CeO₂ catalysts showed good catalytic behaviours. Here, we find that the Pt/Mg-Ce-O catalyst, prepared from MgO and CeO₂ by the sol-gel method, is a very active and selective catalyst towards N₂ formation in the whole 100–400 °C range. This catalyst appears to be the most active, selective and stable one ever reported in the literature for the NO/H₂/O₂ reaction, even in the presence of 5%v H₂O or 20 ppmv of SO₂ in the feed stream.Selected article from the Regional Symposium on Chemistry and Environment, Krusevac, Serbia, June 2003, organised by Dr. Branimir Jovancicevic.     

A study of biochemical parameters among individuals residing in a fluoride endemic area in India

Fluoride (Fl) exerts an inhibitory effect on many metabolic enzymes of various tissues. A study was carried out among individuals residing in a Fl-affected area in India. The biochemical parameters including serum enzyme activities of alkaline phosphatase (ALKP), glutamic pyruvic transaminase (SGPT), lactate dehydrogenase (LDH), and serum creatinine (CRTN) were estimated in 259 subjects compared to 233 controls. The results showed that among the Fl-exposed population, ALKP and SGPT were significantly increased compared to control. The CRTN levels were also significantly increased compared to the control subjects. LDH levels were not markedly altered. Data suggest that Fl exposure affects renal and hepatic functions in endemic areas of India.     

Exuviaella cordata red tide in Bulgarian coastal waters (May to June 1986)

The structure and some functional characteristics of the plankton community at the time of aExuviaella cordata red tide were investigated in Burgas Bay, Bulgaria, in May and June 1986. Characteristics of main plankton components (phyto-, bacterio-, nanoheterotrophic plankton, ciliates and mesoplankton) in the bloom area are presented. Development of theE. cordata bloom was determined by abiotic conditions among which eutrophication and salinity decrease caused the patchy character of its rapid development. Attainment of maximum red tide (ca. 1x10⁹ cells l^-1; 1x10³ g m^-3) from background (500 to 800x10³ cells l^-1; 600 mg m^-3) took 3 to 7d. Growth rate () during that period was 1.2 to 2.2 doublings per day. A sharp bloom decline (3 to 4d) was caused by parasitic flagellates destroying the alga's chloroplast. Diel biomass losses due to grazing remained below 5%. Metabolites and degradation products ofE. cordata revealed no pronounced toxic effects on the other components of the planktonic community. The rapid bloom degradation due to the effects of parasitic flagellates indicates the high potential of ecosystem self-regulation.