基于白碳黑的水化硅酸钙制备及其磷回收特性简

以白碳黑、硅灰、硅藻土和硅胶筛选硅质原料,并与钙质原料电石渣制备了水化硅酸钙。借助XRF、BET、FTIR等表征手段,通过多次重复除磷实验,研究了硅质原料特性对水化硅酸钙回收磷性能的影响。结果表明,白碳黑具有极高的反应活性,因此可作为制备具有磷回收特性的水化硅酸钙的硅质原料。结合XRD等表征发现,白碳黑的有效利用率是影响水化硅酸钙回收磷性能的关键,该利用率取决于白碳黑与电石渣的摩尔配比以及水热反应温度。当电石渣与白碳黑的摩尔比为1.6：1,反应温度为170℃时,白碳黑具有最佳的利用效率。该条件制备的水化硅酸钙可作为晶种,在其表面结晶形成羟基磷灰石,从而达到磷回收的目的,磷回收后固体物质中的磷含量为19.05%。     

负载型Mn-Ce/TiO2催化剂的制备及其低温脱硝活性简

以成型TiO₂作为载体,通过浸渍法制备了Mn-Ce/TiO₂低温SCR催化剂,并系统研究了制备方法、煅烧条件、活性组分担载量、Mn含量等参数对催化剂催化还原NO性能的影响。结果表明,煅烧温度的升高会促使活性组分结晶度的提高,从而引起催化活性的降低,在500℃和600℃下所得Mn-Ce/TiO₂催化剂活性组分为无定型态,表现出较高的脱硝活性。活性组分担载量的增加有利于催化活性的提高。Mn含量对Mn-Ce/TiO₂催化剂的活性有较大影响,当Mn/（Mn+Ce）摩尔比为40%和85%时,催化剂活性最高。     

DO浓度对间歇曝气单级自养脱氮系统N2O排放的影响

以单级自养脱氮系统为研究对象,采用有效容积为15 L的SBBR反应器,系统进水NH+4-N浓度约为360 mg/L,控制温度为(30±2)℃,采用间歇曝气方式运行,曝气段DO浓度从2.4~2.6 mg/L逐渐下降到0.9~1.1 mg/L,研究了单级自养脱氮系统的脱氮性能与N2O排放情况。结果表明,反应器曝气段DO浓度从2.4~2.6 mg/L下降到0.9~1.1mg/L,系统TN去除率均达到80%,但在相同运行时间内的TN去除率依次降低,NH+4-N平均反应速率从0.19 mg/(L·min)降低至0.05 mg/(L·min),NO-3-N累计产生量稳定于14.9~16.5 mg/L,NO-2-N浓度在反应器内未产生明显的积累。随着曝气段DO浓度的下降,最大N2O释放速率逐渐降低,N2O累计释放量从73.8 mg下降到61.0 mg,N2O转化率介于2.4%~2.9%。     

棉花耐涝相关种质资源遗传多样性分析

为了解棉花耐涝相关种质资源的遗传多样性,选用均匀分布于棉花全基因组的145对引物,从中筛选出44对SSR引物对48份涝相关种质资源进行遗传多样性分析。结果表明,44对SSR引物在48份材料中共检测出170个等位基因变异,平均每个位点有386个。其中耐涝材料的位点多态信息含量(PIC)、每个位点的有效等位基因数(Ne)、基因型多样性(H′)分别为0632、1710 4和0393 7,涝敏感材料的PIC、Ne、H′分别为0628、1721 6和0399 4。耐涝材料和涝敏感材料的Jaccard相似性系数分别在0462~0925和0398~0845之间,遗传相似性系数总体平均值接近,但耐涝材料的变化幅度更大。用类平均法(UPGMA)聚类将48份材料分成2个类群。其中,第Ⅰ类包含39个品种,第Ⅱ类包含9个品种。大多数材料之间的遗传相似性系数较高,表明陆地棉耐涝相关种质资源遗传基础狭窄。本结果可为棉花耐涝育种亲本选配和相关机理研究提供基础资料     

Concentration and health risk evaluation of heavy metals in market-sold vegetables and fishes based on questionnaires in Beijing,China

Concentrations of heavy metals (As, Cd, Pb, Cu, Ni, Fe, Mn, and Zn) in market vegetables and fishes in Beijing, China, are investigated, and their health risk to local consumers is evaluated by calculating the target hazard quotient (THQ). The heavy metal concentrations in vegetables and fishes ranged from not detectable (ND) to 0.21 mg/kg fresh weight (f.w.) (As), ND to 0.10 mg/kg f.w. (Cd), and n.d to 0.57 mg/kg f.w. (Pb), with average concentrations of 0.17, 0.04, and 0.24 mg/kg f.w., respectively. The measured concentrations of As, Cd, Pb, Cu, Ni, Fe, Mn, and Zn are generally lower than the safety limits given by the Chinese regulation safety and quality standards of agriculture products (GB2762-2012). As, Cd, and Pb contaminations are found in vegetables and fishes. The exceeding standard rates are 19 % for As, 3 % for Cd, and 25 % for Pb. Pb contaminations are found quite focused on the fish samples from traditional agri-product markets. The paper further analyzed the health risk of heavy metals in vegetables and fishes respectively from supermarkets and traditional agri-product markets; the results showed that the fishes of traditional agri-product markets have higher health risk, while the supermarkets have vegetables of higher heavy metal risk, and the supervision should be strengthened in the fish supply channels in traditional agri-product markets.     

废旧冰箱拆解聚氨酯泡沫塑料制备PU/PP复合材料

利用废旧冰箱拆解的聚氨酯泡沫塑料(PU)和聚丙烯(PP)、聚丙烯接枝马来酸酐(PP-g-MAH)为原料,采用物理化学回收技术制备PU/PP复合材料。用正交实验法分析PU填充量、PU粒径和PP-g-MAH 3个因素对PU/PP复合材料力学性能影响的显著性。结果表明,PU填充量对PU/PP复合材料拉伸性能有显著影响,对冲击性能和弯曲性能没有显著影响;在本文的实验范围内,PU粒径对PU/PP复合材料的力学性能影响不大;而PP-g-MAH投加量对PU/PP复合材料具有一定的影响。确定的优化工艺配方为:PU 40%;PU粒径选择2.00 mm;PP-g-MAH投加量10%。采用优化工艺制备的PU/PP复合材料的密度为1 042.88 kg/m3;冲击强度为2.9 kJ/m2;拉伸强度为10.30 MPa;拉伸模量为1 100 MPa;弯曲强度为18.5 MPa;弯曲模量为733 MPa。     

生物炭修复Cd,Pb污染土壤的研究进展

随着矿产开采、冶炼等工业活动以及污水灌溉、施用污泥和劣质化肥等农业活动的进行,Cd,Pb等有害重金属不断进入农业环境中,对农田、菜地等造成污染。生物炭作为重要的土壤改良剂,在对Cd,Pb污染土壤的修复中表现出巨大的潜力。从生物炭的特性及制备、修复效果及其影响因素、修复机理等方面,对近年来国内外有关生物炭修复Cd,Pb污染土壤的研究成果和现状进行了总结,并对生物炭修复Cd,Pb污染土壤的发展前景和未来研究方向进行了展望。     

垃圾焚烧发电厂渗滤液MBR-NF截留液中腐植酸的超滤分离回收

垃圾焚烧发电厂渗滤液MBR-NF膜截留液因含有高浓度的难降解有机物和无机盐而难以处理。考虑其所含有机物大部分为腐植酸,可加于资源利用。本研究采用超滤对MBR-NF膜截留液中的腐植酸进行分离回收。实验结果表明,超滤能有效分离截留液中有机物和无机盐离子,分离因子与体积浓缩倍数(CF)呈良好的线性关系;回收样品的腐植酸含量达到36 g/L以上,重金属含量低于相关标准限值,表明采用超滤分离回收垃圾焚烧发电厂渗滤液MBR-NF截留液中的腐植酸是可行的。     

Expansion of cropland area and formation of the eastern farming-pastoral ecotone in northern China during the twentieth century

Land cover changes induced by historical cultivation in ecologically fragile areas involving important issues such as environmental change, ecology, and human sustainability are particularly worthy of attention. This paper reconstructs the spatial distribution of cultivated areas at the county level in the eastern farming-pastoral ecotone of northern China for four time periods during the twentieth century. The paper also analyzes how the location of cultivation ratio contours of 15 and 30 %, representing the boundaries of agricultural areas, have moved and the formation process of farming-pastoral ecotone patterns during this period. The study concludes that the area and ratio of cultivated land fluctuations increased during the twentieth century. The boundaries of the cultivation ratio contours of 15 and 30 % continually moved west and north. Moving north took priority over the other directions during the period of 1916–1940, when its center moved the farthest during the twentieth century, and the boundaries primarily moved westward during 1940–1980 and northwestward during 1980–2000. The distance, direction, and extent of the movement of the cultivation boundaries are all related to agricultural area expansion processes during this period, finally resulting in the creation of the modern farming-pastoral ecotone pattern.     

A survey-based evaluation of community-based co-management of forest resources: a case study of Baishuijiang National Natural Reserve in China

Community-based co-management (CBCM) mechanisms for forest management have matured through the development of new economic analysis and common property theory. However, while many local CBCM mechanisms have been initiated in Chinese Natural Reserves, there are few objective, data-based evaluations of whether these mechanisms improve forest conservation and local livelihoods. This research uses Baishuijiang National Natural Reserve (BNNR) as a study case to evaluate China’s current CBCM mechanisms. The evaluation is based mainly on three criteria: efficiency, equality and sustainability of project operation. Survey data indicate that local CBCM mechanisms provide a wide-participation platform for local villagers, associated administration managers, research institutions and NGOs to join in forest resource protection work while improving local livelihood. CBCM projects have also facilitated a reduction in forest resource dependency, the improvement of household income and encouragement of local people to participate in forest resource protection. Our analysis suggests that most CBCM organizations have made progress in efficiency, equity and sustainability. However, further study should focus on how to deal with the lingering problems of inequity in responsibility and rights among CBCM committee members, poor distribution of benefits, insufficient program-design and management expertise, faulty information dissemination, and insufficient capital investment.