Recycling plant wax constituents for chemical defense: hemi-biosynthesis of triterpene saponins from β-amyrin in a leaf beetle

Several species of Doryphorina leaf beetles from Central- and South America produce oleanane triterpene glycosides in their defensive glands. The presence of pentacyclic triterpenes in insects is intriguing since they lack the key enzymes necessary to synthesize these compounds. Since -amyrin is a common constituent of leaf waxes, we hypothesized that these leaf beetles use this compound as a precursor to their oleanane glycosides. To test this hypothesis we first confirmed the presence of -amyrin in Ipomoea batatas, the food plant of Platyphora kollari. Next, adults of P. kollari were fed for 10 days with I. batatas leaf disks painted with a solution of [2,2,3-²H₃]-amyrin ([2,2,3-²H₃]-1). The secretion from their defensive glands was collected and analyzed by HPLC-ESIMS. The results demonstrated that the secretion of beetles fed with an amount of [2,2,3-²H₃]-amyrin corresponding to the quantity of unlabeled (natural) -amyrin present in the leaf disks contained on average 5.1% of [2,2,3-²H₃]-3-O--d-glucopyranosyl-(1-->4)--d-glucuronopyranosyl-hederagenin ([2,2,3-²H₃]-2), whereas the secretions of beetles fed with 10 times this amount of [2,2,3-²H₃]-amyrin contained on average 23.9% of [2,2,3-²H₃]-2. In both series of experiments, the percentage of labeled versus unlabeled triterpene glycoside in the secretion was positively correlated with the amount of deuterated -amyrin ingested. These results demonstrate for the first time that some leaf beetles are able to metabolize a widespread triterpenic constituent of leaf wax into more complex glycosides that are stored in their defensive glands.     

Adaptation Options Strategies for Hazards and Vulnerability Mitigation: An International Perspective

The broad objective of this special issue of Mitigation and Adaptation Strategies for Global Change is to address some of the gaps in our knowledge and understanding of the policies, programs, and measures that might be applied to natural hazards and their impacts in an era of climate change. Given the global impacts of climate change and world-wide pattern of increasing losses from natural hazards we necessarily adopt an international perspective. The specific goals of the special issue are to: (a) encompass experiential aspects, emphasizing current practice of mitigation and its associated measures, and their results; and (b) explore primary or root causes of alarming shifts in human and economic costs of environmental extremes. Special emphasis is placed on how human activities are playing a key role in enhancing vulnerability to NTEE (nature-triggered environmental extremes), quite independently from the anthropogenic causes of climate change. The goals are also (c) to examine costs, risks, and benefits (of all kinds including social, political, ecological) of mitigation, and adjustment and adaptation measures; and (d) analyze policy implications of alternative measures. These components are expected to make significant contributions to policy considerations – formulation, implementation and evaluation. There is much uncertainty about the rate of climate change; however, the fact of increase of the atmospheric temperature in the last century is no longer a subject of scientific or policy debate. Due to such changes in the geophysical parameters, certain types of nature-triggered environmental extreme events are likely to continue to increase. How global warming will affect regional climates and pertinent variables is not well known, limiting our ability to predict consequential effects. This factor poses serious constraints against any straightforward policy decisions. Research findings of the work of this volume reaffirm that human dimensions, specifically our awareness and decision-making behavior, are powerful explanatory factors of increasing disaster losses. Disaster mitigation through addressing human, social, and physical vulnerability is one of the best means for contributing to ‘climate change adaptation plans’, and sustainable development goals. Recent lessons from various countries have depicted that the formulation of mitigation strategies cannot be exclusively top-down as it requires social, political, and cultural acceptance and sense of ownership. An interactive, participatory process, involving local communities, produces best expected outcomes concerning mitigation, preparedness, and recovery. An emerging consensus is that there is a need to move towards the ‘mission’ of the International Strategy for Disaster Reduction which aims at building disaster resilient communities by promoting increased awareness of the importance of disaster reduction as an integral component of sustainable development, with the goal of reducing human, social, economic and environmental losses due to natural hazards and related technological and environmental disasters. Sharing of best practices and lessons globally is certain to produce more efficiency and understanding in policy and decision making.     

The effect of queen pheromones on worker honey bee ovary development

We report results that address a long-standing controversy in honey bee biology, the identity of the queen-produced compounds that inhibit worker honey bee ovary development. As the honey bee is the only organism for which identities have been proposed for any pheromone that regulates reproduction, the resolution of its identity is of broad significance. We examined the effects of synthetic honey bee queen mandibular pheromone (QMP), four newly identified queen retinue pheromone components, and whole-queen extracts on the ovary development of caged worker bees. The newly identified compounds did not inhibit worker ovary development alone, nor did they improve the efficacy of QMP when applied in combination. QMP was as effective as queen extracts at ovary regulation. Caged workers in the QMP and queen extract treatments had better developed ovaries than did workers remaining in queenright colonies. We conclude that QMP is responsible for the ovary-regulating pheromonal capability of queens from European-derived Apis mellifera subspecies.     

Sorption of pentachlorophenol on pine bark

The minimization of pentachlorophenol (PCP) transport in the environment driven by industrial wastewater discharges can be accomplished by sorption in natural, available and low cost by-products like pine bark. Taking into account that PCP is a chemical which behaviour is highly dominated by the surrounding features, this work intended to evaluate the sorption kinetics and equilibrium parameters according to the pH and temperature as well as the pine bark particle size. The PCP uptake by pine bark showed to be faster in the initial phase followed by a slower process, being 24 h the suitably time to reach the sorption equilibrium in the range of pH studied. The neutral PCP species showed to have higher binding capacity to pine bark than the anionic PCP, which was reflected in a decrease in the distribution coefficient (Kd) of the linear sorption isotherm with the increase of solution pH from 2 to 7. On the other hand, between 10 degrees C and 35 degrees C, the temperature does not seem to play a significant role in the PCP sorption by pine bark, while the sorbent size is a key parameter to enhance the overall process.     

Cesium migration in saturated silica sand and Hanford sediments as impacted by ionic strength

Large amounts of 137Cs have been accidentally released to the subsurface from the Hanford nuclear site in the state of Washington, USA. The cesium-containing liquids varied in ionic strengths, and often had high electrolyte contents, mainly in the form of NaNO3 and NaOH, reaching concentrations up to several moles per liter. In this study, we investigated the effect of ionic strengths on Cs migration through two types of porous media: silica sand and Hanford sediments. Cesium sorption and transport was studied in 1, 10, 100, and 1000 mM NaCl electrolyte solutions at pH 10. Sorption isotherms were constructed from batch equilibrium experiments and the batch-derived sorption parameters were compared with column breakthrough curves. Column transport experiments were analyzed with a two-site equilibrium-nonequilibrium model. Cesium sorption to the silica sand in batch experiments showed a linear sorption isotherm for all ionic strengths, which matched well with the results from the column experiments at 100 and 1000 mM ionic strength; however, the column experiments at 1 and 10 mM ionic strength indicated a nonlinear sorption behavior of Cs to the silica sand. Transport through silica sand occurred under one-site sorption and equilibrium conditions. Cesium sorption to Hanford sediments in both batch and column experiments was best described with a nonlinear Freundlich isotherm. The column experiments indicated that Cs transport in Hanford sediments occurred under two-site equilibrium and nonequilibrium sorption. The effect of ionic strength on Cs transport was much more pronounced in Hanford sediments than in silica sands. Effective retardation factors of Cs during transport through Hanford sediments were reduced by a factor of 10 when the ionic strength increased from 100 to 1000 mM; for silica sand, the effective retardation was reduced by a factor of 10 when ionic strength increased from 1 to 1000 mM. A two order of magnitude change in ionic strength was needed in the silica sand to observe the same change in Cs retardation as in Hanford sediments.     

Advanced oxidation processes in azo dye wastewater treatment.

The chemical degradation of synthetic azo dyes color index (C.I.) Acid Orange 7, C.I. Direct Orange 39, and C.I. Mordant Yellow 10 has been studied by the following advanced oxidation processes: Fenton, Fenton-like, ozonation, peroxone without or with addition of solid particles, zeolites HY, and NH4ZSM5. Spectrophotometric (UV/visible light spectrum) and total organic carbon measurements were used for determination of process efficiency and reaction kinetics. The degradation rates are evaluated by determining their rate constants. The different hydroxyl radical generation processes were comparatively studied, and the most efficient experimental conditions for the degradation of organic azo dyes solutions were determined.     

Hybrid process for heavy metal removal from wastewater sludge.

Bioleaching processes have been demonstrated to be effective technologies in removing heavy metals from wastewater sludge, but long hydraulic retention times are typically required to operate these bioprocesses. A hybrid process (coupling biological and chemical processes) has been explored in laboratory pilot-scale experiments for heavy metals (cadmium [Cd], copper [Cu], chromium [Cr], and zinc [Zn]) removal from three types of sludge (primary sludge, secondary activated sludge, and a mixture of primary and secondary sludge). The hybrid process consisted of producing a concentrate ferric ion solution followed by chemical treatment of sludges. Ferric iron solution was produced biologically via oxidation of ferrous iron by A. ferrooxidans in a continuous-flow stirred tank (5.2 L) reactor (CSTR). Wastewater sludge filtrate (WSF) containing nutrients (phosphorus and nitrogen) has been used as culture media to support the growth and activity of indigenous iron-oxidizing bacteria. Results showed that total organic carbon (TOC) concentrations of the culture media in excess of 235 mg/L were found to be inhibitory to bacterial growth. The oxidation rate increased as ferrous iron concentrations ranged from 10 to 40 g Fe2+/L. The percentage of ferrous iron (Fe2+) oxidized to ferric iron (Fe3+) increased as the hydraulic retention time (HRT) increased from 12 to 48 h. Successful and complete Fe2+ oxidation was recorded at a HRT of 48 h using 10 g Fe2+/L. Subsequently, ferric ion solution produced by A. ferrooxidans in sludge filtrate was used to solubilize heavy metals contained in wastewater sludge. The best solubilization was obtained with a mixture of primary and secondary sludge, demonstrating a removal efficiency of 63, 71, 49, and 80% for Cd, Cu, Cr, and Zn, respectively.     

Kinetics of benzene adsorption onto activated carbon

An activated carbon bed adsorption process is influenced by the adsorbents' characteristics, volatile organic compound (VOC) characteristics, and process conditions. In the literatures, the adsorption processes of the adsorbents and VOCs were usually considered to be in equilibrium. In this study, the VOC adsorption processes by activated carbon were considered to be a kinetic process, i.e. they are not in equilibrium. Then, isothermal adsorption curves and a small column experiment were simulated.     

Geochemical evidences of the anthropogenic alteration of trace metal composition of the sediments of Chiricahueto marsh (SE Gulf of California)

Seven sediment cores (60-80 cm) were collected at Chiricahueto marsh, a salt marsh influenced by agrochemical, domestic and industrial effluents. The concentrations of Ag, Al, Cd, Co, Cu, Fe, Li, Mn, Pb, V and Zn were studied in the solid phase at each 1-cm section. The profiles of Ag, Cd, Cu, Mn, Ni, Pb and Zn showed a slight recent pollution in the site with enrichment and anthropogenic factors higher than unity; and correlation analysis indicated a direct association with organic carbon. Al, Co, Cr, Fe, Li, and V concentration profiles displayed a negative correlation with organic C and positive with mud content and no consistent enrichment at surface. Based on the principal component analysis and correlation analysis, two principal groups of metals were identified. The first group includes Al, Co, Cr, Fe and Li, that are derived predominantly from the weathering of parent materials in the local bedrock; and the second group include most of the metals, which were relatively enriched at surficial sediments, that are produced mainly by anthropogenic activities such as agriculture (Cd, Cu and Zn), sewage effluents (Ag, Cd, Cu, Ni, Pb and Zn) and in lesser extent atmospheric deposition (Cd and Pb).     

The photocatalytic disinfection of urban waste waters

In this paper we present the results of the photocatalytic disinfection of urban waste water. Two microbial groups, total coliforms and Streptococcus faecalis, have been used as indexes to test disinfection efficiencies. Different experimental parameters have been checked, such as the effect of TiO2, solar or UV-lamp light and pH. Disinfection of water samples has been achieved employing both UV-lamp and solar light in agreement with data shown by other authors. The higher disinfection rates obtained employing an UV-lamp may be explained by the stronger incident light intensity. Nevertheless no consistent differences have been found between TiO2-photocatalysis and direct solar or UV-lamp light irradiation at natural sample pH (7.8). At pH 5 the presence of TiO2 increases the relative inactivation rate compared with the absence of the catalyst. After the photocatalytic bacterial inactivation, the later bacterial reappearance was checked for total coliforms at natural pH and pH 5, with and without TiO2. Two h after the photocatalytic treatment, CFU increment was almost nill. But 24 and 48 h later an important bacterial CFU increment was observed. This CFU increment is slower after irradiation with TiO2 at pH 5 in non-air-purged samples.