Biocomplementation of SVE to achieve clean-up goals in soils contaminated with toluene and xylene

Soil vapor extraction (SVE) and bioremediation (BR) are two of the most common soil remediation technologies. Their application is widespread; however, both present limitations, namely related to the efficiencies of SVE on organic soils and to the remediation times of some BR processes. This work aimed to study the combination of these two technologies in order to verify the achievement of the legal clean-up goals in soil remediation projects involving seven different simulated soils separately contaminated with toluene and xylene. The remediations consisted of the application of SVE followed by biostimulation. The results show that the combination of these two technologies is effective and manages to achieve the clean-up goals imposed by the Spanish Legislation. Under the experimental conditions used in this work, SVE is sufficient for the remediation of soils, contaminated separately with toluene and xylene, with organic matter contents (OMC) below 4 %. In soils with higher OMC, the use of BR, as a complementary technology, and when the concentration of contaminant in the gas phase of the soil reaches values near 1 mg/L, allows the achievement of the clean-up goals. The OMC was a key parameter because it hindered SVE due to adsorption phenomena but enhanced the BR process because it acted as a microorganism and nutrient source.     

Bioaccessibility testing of cobalt compounds

Testing of metal compounds for solubility in artificial fluids has been used for many years to assist determining human health risk from exposure to specific compounds of concern. In lieu of obtaining bioavailability data from samples of urine, blood, or other tissues, these studies measured solubility of compounds in various artificial fluids as a surrogate for bioavailability. In this context, the measurement of metal "bioaccessibility" can be used as an in vitro substitute for measuring metal bioavailability. Bioaccessibility can be defined as a value representing the availability of metal for absorption when dissolved in in vitro surrogates of body fluids or juices. The aim of this study was to measure and compare the bioaccessibility of selected cobalt compounds in artificial human tissue fluids and human serum. A second aim was to initiate studies to experimentally validate an in vitro methodology that would provide a conservative estimate of cobalt bioavailability in the assessment of dose from human exposure to various species of cobalt compounds. This study evaluated the bioaccessibility of cobalt(II) from 11 selected cobalt compounds and an alloy in 2 physical forms in 5 surrogate human tissue fluids and human serum. Four (4) separate extraction times were used up to 72 hours. The effect of variables such as pH, dissolution time, and mass-ion effect on cobalt bioaccessibility were assessed as well. We found that the species of cobalt compound as well as the physico-chemical properties of the surrogate fluids, especially pH, had a major impact on cobalt solubility. Cobalt salts such as cobalt(II) sulfate heptahydrate were highly soluble, whereas cobalt alloys used in medical implants and cobalt aluminate spinels used as pigments, showed minimal dissolution over the period of the assay.     

Biodiversity of the ground-dwelling spider fauna of afforestation habitats

The aim of this study was to assess spider diversity among habitats that are typically used for afforestation in Ireland, and to identify habitat parameters which could potentially be used as indicators of their biodiversity value. Ground-dwelling spiders were surveyed in 24 sites across Ireland, with eight sites of each of the following habitat types: improved grassland, wet grassland and peatland. The spiders were sampled using pitfall traps which were located within the major vegetation types present in each site as well as within supplementary habitat features which may add to biodiversity value of the whole site such as hedgerows, flushes and the edges of ditches and streams.Each habitat supported distinct spider assemblages that reflect major differences in both environmental conditions and management regime. The improved grasslands had low spider species richness and low variation in assemblage structure which is probably related to the intensive management of this habitat. In this case hedgerows maybe an important aspect of the spider diversity within agricultural landscapes. The peatlands, and to a lesser extent wet grasslands, supported a diverse and specialist spider fauna, including a number of rare species; this may be due to differences in soil moisture and plant architecture. Indicators of biodiversity value identified included wet flushes in the peatlands and low grazing pressure in the wet grasslands. This study suggests that in terms of biodiversity value improved grassland is the preferable habitat for afforestation, because of the poor baseline spider diversity. However, it may be unrealistic to expect land owners to afforest their most productive agricultural land, so the management and habitat indicators identified in this study may be of use for assessing habitat quality among the wet grassland and peatlands to allow sites with lower biodiversity value to be identified.     

Measurement of environmental pollutants using passive sampling devices--a commentary on the current state of the art

Passive sampling devices have been used since the 1970s to measure time-weighted average (TWA) or equilibrium concentrations of pollutants in various environmental matrices (e.g. air, soils and sediments and water). In recent years the popularity of using such samplers has increased and the technology in now well established for the measurement of atmospheric pollutants. This sector has a long experience of using passive samplers in the short- and long-term assessment of air quality in the local environment and on a global scale (e.g. within the United Nations Stockholm Convention on the trans-boundary movement of persistent organic pollutants (POPs) where large networks of samplers on a continental scale have been established). In comparison, the use of passive samplers for monitoring the aquatic environment has been slower to take off. There has, however, been a recent research drive to develop devices for measuring the wide range of pollutants that can be found in environmental waters (e.g. ground, surface, and marine). It is now being recognised that passive samplers can play a valuable role in monitoring water quality within a legislative framework such as the European Union's Water Framework Directive (WFD). The data from these devices can be used alongside the results obtained from conventional spot or bottle sampling to improve risk assessments and to inform decisions on undertaking potentially expensive remedial actions. Such monitoring techniques may have uses within the European Registration, Evaluation, Authorisation & restriction of CHemicals (REACH) Directive and the forthcoming European Marine Strategy Directive. It is expected that the aquatic monitoring sector will follow a transition similar to that which occurred in air monitoring where data obtained from passive samplers can use used within a legal framework. There has also been increased interest in extending the role of passive samplers to both the measurement of equilibrium concentrations and investigating the movement and release of the dissolved fraction of various pollutants in the pore water of sediments and soils.     

Impacts of epigeic, anecic and endogeic earthworms on metal and metalloid mobility and availability

The introduction of earthworms into soils contaminated with metals and metalloids has been suggested to aid restoration practices. Eisenia veneta (epigeic), Lumbricus terrestris (anecic) and Allolobophora chlorotica (endogeic) earthworms were cultivated in columns containing 900 g soil with 1130, 345, 113 and 131 mg kg(-1) of As, Cu, Pb and Zn, respectively, for up to 112 days, in parallel with earthworm-free columns. Leachate was produced by pouring water on the soil surface to saturate the soil and generate downflow. Ryegrass was grown on the top of columns to assess metal uptake into biota. Different ecological groups affected metals in the same way by increasing concentrations and free ion activities in leachate, but anecic L. terrestris had the greatest effect by increasing leachate concentrations of As by 267%, Cu by 393%, Pb by 190%, and Zn by 429% compared to earthworm-free columns. Ryegrass grown in earthworm-bearing soil accumulated more metal and the soil microbial community exhibited greater stress. Results are consistent with earthworm enhanced degradation of organic matter leading to release of organically bound elements. The degradation of organic matter also releases organic acids which decrease the soil pH. The earthworms do not appear to carry out a unique process, but increase the rate of a process that is already occurring. The impact of earthworms on metal mobility and availability should therefore be considered when inoculating earthworms into contaminated soils as new pathways to receptors may be created or the flow of metals and metalloids to receptors may be elevated.     

Environmentally stratified sampling design for the development of Great Lakes environmental indicators

Understanding the relationship between human disturbance and ecological response is essential to the process of indicator development. For large-scale observational studies, sites should be selected across gradients of anthropogenic stress, but such gradients are often unknown for a population of sites prior to site selection. Stress data available from public sources can be used in a geographic information system (GIS) to partially characterize environmental conditions for large geographic areas without visiting the sites. We divided the U.S. Great Lakes coastal region into 762 units consisting of a shoreline reach and drainage-shed and then summarized over 200 environmental variables in seven categories for the units using a GIS. Redundancy within the categories of environmental variables was reduced using principal components analysis. Environmental strata were generated from cluster analysis using principal component scores as input. To protect against site selection bias, sites were selected in random order from clusters. The site selection process allowed us to exclude sites that were inaccessible and was shown to successfully distribute sites across the range of environmental variation in our GIS data. This design has broad applicability when the goal is to develop ecological indicators using observational data from large-scale surveys.     

Thyroid ultrasound volume, structure and function after long-term high exposure of large population to polychlorinated biphenyls, pesticides and dioxin

We examined 2,046 adults (834 males and 1,212 females aged 20-75 years) from polluted district in East Slovakia (POLL) and two neighboring upstream and upwind located districts of background pollution (BCGR). By ultrasound we estimated the thyroid volume (ThV), hypoechogenicity (HYE), nodules and cysts. Serum levels of thyrotropin (TSH), thyroperoxidase antibodies (TPOab) and thyroglobulin were estimated by electrochemiluminiscent assay and these of 15 PCB congeners, p,p'-DDE, p,p'-DDT, hexachlorobenzene (HCB) and hexachlorocyclohexane by high-resolution gas chromatography. In 320 subjects also selected hydroxylated and methylsulfonated PCB metabolites, polychlorinated dibenzo-dioxins (PCDDs), -furans (PCDFs), five dioxin-like coplanar and eight mono-ortho PCB congeners were estimated. Urinary iodine was measured by automatic microplate method. Reciprocal positive association was found between three major POPs (PCBs, DDE and HCB), the levels of these and also PCDDs plus PCDFs in polluted area being considerably higher than in background pollution area. ThV in groups of males and females from POLL with high PCBs level was significantly higher (p<0.001 by t-test) then in age and sex matched groups from BCGR with low PCBs level. In 1,048 males and females aged <60 years with serum PCBs level >1,000 ng g(-1) lipid (median=1,756 ng g(-1)) a significant effect of age on ThV was found (p<0.01 by ANOVA), while in 921 respective subjects with PCBs level <1,000 ng g(-1) (median=661 ng g(-1)) it was not. These findings supported the view on the additional effect of PCBs on ThV other than that of age. Since the urinary iodine in both districts showed optimal range, any interfering effect of unsatisfactory iodine intake on ThV may be excluded. The frequency of autoimmune thyroiditis signs such as HYE, increased serum level of TPOab and TSH resulting in subclinical or overt thyroid hypofunction was positively associated with sex, age and organochlorine levels. The increase of such frequency in males with POPs levels was much more abrupt than that in females. No considerable differences in the frequency of thyroid nodules as related to PCBs level were found.     

Risk factors for increased BTEX exposure in four Australian cities

Benzene, toluene, ethylbenzene and xylenes (BTEX) are common volatile organic compounds (VOCs) found in urban airsheds. Elevated levels of VOCs have been reported in many airsheds at many locations, particularly those associated with industrial activity, wood heater use and heavy traffic. Exposure to some VOCs has been associated with health risks. There have been limited investigations into community exposures to BTEX using personal monitoring to elucidate the concentrations to which members of the community may be exposed and the main contributors to that exposure. In this cross sectional study we investigated BTEX exposure of 204 non-smoking, non-occupationally exposed people from four Australian cities. Each participant wore a passive BTEX sampler over 24h on five consecutive days in both winter and summer and completed an exposure source questionnaire for each season and a diary for each day of monitoring. The geometric mean (GM) and range of daily BTEX concentrations recorded for the study population were benzene 0.80 (0.04-23.8 ppb); toluene 2.83 (0.03-2120 ppb); ethylbenzene 0.49 (0.03-119 ppb); and xylenes 2.36 (0.04-697 ppb). A generalised linear model was used to investigate significant risk factors for increased BTEX exposure. Activities and locations found to increase personal exposure included vehicle repair and machinery use, refuelling of motor vehicles, being in an enclosed car park and time spent undertaking arts and crafts. A highly significant difference was found between the mean exposures in each of the four cities, which may be explained by differences in fuel composition, differences in the mix and density of industry, density of motor vehicles and air pollution meteorology.     

Tissue heavy metal concentrations of stranded California sea lions (Zalophus californianus) in Southern California

Concentrations of nine heavy metals (As, Cd, Cu, Fe, Hg, Pb, Mn, Mo and Zn) were determined in the hepatic and renal tissues of 80 stranded California sea lions (Zalophus californianus). Significant age-dependant increases were observed in liver and kidney concentrations of cadmium and mercury, and renal zinc concentrations. Hepatic iron concentrations were significantly higher in females than males. Animals with suspected domoic acid associated pathological findings had significantly higher concentrations of liver and kidney cadmium; and significantly higher liver mercury concentrations when compared to animals classified with infectious disease or traumatic mortality. Significantly higher hepatic burdens of molybdenum and zinc were found in animals that died from infectious diseases. This is the largest study of tissue heavy metal concentrations in California sea lions to date. These data demonstrate how passive monitoring of stranded animals can provide insight into environmental impacts on marine mammals.