Impact of methylene chloride on microorganisms and phenanthrene mineralization in soil

This study investigated the effects of the quantity of methylene chloride, used as a carrier solvent for phenanthrene when added to soil, on phenanthrene mineralization kinetics, soil phospholipid fatty add profiles (PLFA), and phenanthrene distribution. Methylene chloride dosages of 25 microL/g soil or more resulted in an enrichment of saturated PLFAs, suggesting soil microorganisms had adjusted their cell membranes in response to the solvent. A greater fraction of phenanthrene mineralized when spiked in 5 microL/g than in 25 microL/g methylene chloride suggesting that the methylene chloride became toxic to phenanthrene-degrading organisms in soil. Phenanthrene was more equally distributed among 0.1 g soil subsamples if spiked in 25 than 5 or 1 microL methylene chloride per gram soil. Thus the amount of methylene chloride used to spike phenanthrene in soil strongly impacted the mineralization kinetics, phenanthrene distribution, and microbial community in soil. Because a variety of spiking methods are used in biodegradation research, scientists should consider the quantity of solvents used when comparing results among different studies.     

Energy and environmental issues in Vietnam

This paper discusses the pattern of commercial and traditional energy use in Vietnam and its evolution. It presents the trend of energy-related emissions of CO₂, SO₂ and NO_x during the past decade with a methodology given in an Appendix. Recent developments of environmental policies and institutions in Vietnam are also discussed.     

改善微电网电能质量的分层控制策略研究

微电网技术具有许多优点,但分布式电源的不稳定性将导致微电网不易运行控制,对微电网的电能质量产生不利影响。针对此问题,提出了分层控制策略,以改善和提高微电网的电能质量。分层控制包含上下 2 层,通过上层将控制信息发送到下层实现。其中,初级控制采用下垂控制方法,提出了基于电压外环、电流内环和功率环的反馈控制器。二级控制(secondarycontrol)通过向初级控制(primary control)反馈二级控制后控制逆变器的输出电压幅值和频率,使之重新达到平衡,实现系统运行的稳定性。利用 Matlab/simulink 仿真结果表明:该分层控制策略对改善微电网电能质量是有效的。     

基于VSG的微电网逆变器控制策略研究

针对微电网中的分布式电源出力的间歇性导致微电网功率不稳定的问题,基于虚拟同步发电机(Virtual Synchronous Generator,VSG)技术的控制方法,建立VSG的数学模型,设计了一种基于电流、电压和功率控制的反馈控制器,提出了一种全新的VSG控制策略,实现分布式电源动态特性对微电网中有功功率和无功功率的均分控制。并通过Matlab/Simulink仿真,验证了所提控制算法的有效性。结果表明:该控制策略对抑制因新能源发电并网导致的电网波动、提高电能质量具有重要意义。     

Multicomponent photocatalysts for synergic removal of antibiotics in aqueous media: a review

Environmental Chemistry Letters - Pollution of waste and natural waters by antibiotics is a major health issue that induces the development of resistant pathogens. Pollutant may be removed by...     

Formaldehyde in China: Production, consumption, exposure levels, and health effects

Formaldehyde, an economically important chemical, is classified as a human carcinogen that causes nasopharyngeal cancer and probably leukemia. As China is the largest producer and consumer of formaldehyde in the world, the Chinese population is potentially at increased risk for cancer and other associated health effects. In this paper we review formaldehyde production, consumption, exposure, and health effects in China. We collected and analyzed over 200 Chinese and English documents from scientific journals, selected newspapers, government publications, and websites pertaining to formaldehyde and its subsequent health effects.Over the last 20 years, China's formaldehyde industry has experienced unprecedented growth, and now produces and consumes one-third of the world's formaldehyde. More than 65% of the Chinese formaldehyde output is used to produce resins mainly found in wood products — the major source of indoor pollution in China. Although the Chinese government has issued a series of standards to regulate formaldehyde exposure, concentrations in homes, office buildings, workshops, public places, and food often exceed the national standards. In addition, there have been numerous reports of formaldehyde-induced health problems, including poisoning and cancer. The lack of quality epidemiological studies and basic data on exposed populations emphasizes the need for more extensive studies on formaldehyde and its related health effects in China.     

Pharmaceutical removal in tropical subsurface flow constructed wetlands at varying hydraulic loading rates

Determining the fate of emerging organic contaminants in an aquatic ecosystem is important for developing constructed wetlands (CWs) treatment technology. Experiments were carried out in subsurface flow CWs in Singapore to evaluate the fate and transport of eight pharmaceutical compounds. The CW system included three parallel horizontal subsurface flow CWs and three parallel unplanted beds fed continuously with synthetic wastewater at different hydraulic retention times (HRTs). The findings of the tests at 2-6 d HRTs showed that the pharmaceuticals could be categorized as (i) efficiently removed compounds with removal higher than 85% (ketoprofen and salicylic acid); (ii) moderately removed compounds with removal efficiencies between 50% and 85% (naproxen, ibuprofen and caffeine); and (iii) poorly removed compounds with efficiency rate lower than 50% (carbamazepine, diclofenac, and clofibric acid). Except for carbamazepine and salicylic acid, removal efficiencies of the selected pharmaceuticals showed significant (p<0.05) enhancement in planted beds as compared to the unplanted beds. Removal of caffeine, ketoprofen and clofibric acid were found to follow first order decay kinetics with decay constants higher in the planted beds than the unplanted beds. Correlations between pharmaceutical removal efficiencies and log K(ow) were not significant (p>0.05), implying that their removal is not well related to the compound's hydrophobicity.     

Optimization of esterification of fatty acid rubber seed oil for methyl ester synthesis in a plug flow reactor

To date, non-food vegetable oil has been considered as the primary source for biodiesel production. Rubber seed oil has high acid value (34 mgKOH/g) and can be used for biodiesel synthesis. The purpose of this study was to investigate esterification of fatty acid, which derived from rubber seed oil, in a plug flow reactor system at high temperature and low methanol consumption. Response surface methodology was applied for design experiment and optimization of esterification reaction. Temperature, methanol consumption, and sulfuric acid were chosen as variables to examine their influence in a conversion to methyl ester. At 140°C, at 5:1 methanol to fatty acid ratio (by mole), H₂SO₄ 1.5 (%v/w), and space time 20 min, the conversion to methyl ester attained 98.2%. Fourier transform infrared spectroscopy (FTIR) and gas chromatography-Mass spectrometry (GC-MS) were used for analysis and to confirm the formation of methyl ester. Methyl ester was characterized for biodiesel fuel properties in accordance to ASTM standard.     

Dioxin contamination in soils of Southern Vietnam

Dioxin is the common name for polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), and is abbreviated as PCDD/Fs. In the case of Southern Vietnam, is of high concern dioxin contamination in the areas affected by past-use chemical defoliants. Our study related to the zone considered as a "hot spot"--Bien Hoa Airbase and surrounding areas (Bien Hung Lake). Although the war ended over 30 years ago, the adverse effects on this territory still continue. Soil and sediment were selected for our research as they act as a sink for PCDD/Fs. The samples were taken and analyzed in CECOTOX laboratory following certified procedures. The total amounts of PCDD/Fs (2,3,7,8 related congeners) in the samples were converted into WHO-TEQ and compared with standard values proposed by Canadian environmental quality guidelines. The obtained data shows a relatively high risk (up to 20.4 times higher than (probable effect level) PEL value for sediment and 46 times higher than standard value for soil). The research is continuing on the assessment of dioxin transport in food chain. Moreover, considering the obtained data a complete solution should be found urgently to solve the problem of dioxin contamination in the studied areas.