Impact of forest policies on timber production in India: a review

Until the 20th century, forest policies across the globe focused primarily on effective forest utilization for timber production. Subsequent loss of forest land prompted many countries to review and amend such policies, in an attempt to incorporate the principles of conservation and sustainable forest management. One of the countries to implement such changes was India, which introduced new policies, acts and programmes to regulate forest conversion and degradation, beginning in the 1980s. These policies, acts, and programmes included the Forest Conservation Act of 1980, the National Forest Policy of 1988 and the Hon. Supreme Court Order of 1996. All of these regulations affected the timber supply from government forest areas, and created a huge gap in timber supply and demand. Currently, this deficit is met through imports and trees outside forests (TOFs). Timber production from government forest areas is abysmally low (3.35% of total demand) compared to potential timber production from TOFs, which fulfil 45% of the total timber demand in India. This implies that TOFs have immense potential in meeting the growing timber demand; however, they have not been fully utilized due to discrepancies in state level TOFs’ policies. The present paper provides a review of different forest policies, acts and guidelines in relation to timber production in India, and provides specific recommendations in order to maximize timber production in the context of increasing demand for timber products.     

Chemical characteristics and source apportionment of PM<Subscript>2.5</Subscript> using PCA/APCS,UNMIX, and PMF at an urban site of Delhi,India

The present study investigated the comprehensive chemical composition [organic carbon (OC), elemental carbon (EC), water-soluble inorganic ionic components (WSICs), and major & trace elements] of particulate matter (PM_2.5) and scrutinized their emission sources for urban region of Delhi. The 135 PM_2.5 samples were collected from January 2013 to December 2014 and analyzed for chemical constituents for source apportionment study. The average concentration of PM_2.5 was recorded as 121.9 ± 93.2 μg m^?3 (range 25.1–429.8 μg m^?3), whereas the total concentration of trace elements (Na, Ca, Mg, Al, S, Cl, K, Cr, Si, Ti, As, Br, Pb, Fe, Zn, and Mn) was accounted for ～17% of PM_2.5. Strong seasonal variation was observed in PM_2.5 mass concentration and its chemical composition with maxima during winter and minima during monsoon seasons. The chemical composition of the PM_2.5 was reconstructed using IMPROVE equation, which was observed to be in good agreement with the gravimetric mass. Source apportionment of PM_2.5 was carried out using the following three different receptor models: principal component analysis with absolute principal component scores (PCA/APCS), which identified five major sources; UNMIX which identified four major sources; and positive matrix factorization (PMF), which explored seven major sources. The applied models were able to identify the major sources contributing to the PM_2.5 and re-confirmed that secondary aerosols (SAs), soil/road dust (SD), vehicular emissions (VEs), biomass burning (BB), fossil fuel combustion (FFC), and industrial emission (IE) were dominant contributors to PM_2.5 in Delhi. The influences of local and regional sources were also explored using 5-day backward air mass trajectory analysis, cluster analysis, and potential source contribution function (PSCF). Cluster and PSCF results indicated that local as well as long-transported PM_2.5 from the north-west India and Pakistan were mostly pertinent.     

Global gene expression and Ingenuity biological functions analysis on PCBs 153 and 138 induced human PBMC in vitro reveals differential mode(s) of action in developing toxicities

Several reports have indicated that low level of polychlorinated biphenyl (PCB) exposure can adversely affect a multitude of physiological disorders and diseases in in vitro, in vivo, and as reported in epidemiological studies. This investigation is focused on the possible contribution of two most prevalent PCB congeners in vitro in developing toxicities. We used PCBs 138 and 153 at the human equivalence level as model agents to test their specificity in developing toxicities. We chose a global approach using oligonucleotide microarray technology to investigate modulated gene expression for biological effects, upon exposure of PCBs, followed by Ingenuity Pathway Analysis (IPA), to understand the underlying consequence in developing disease and disorders. We performed in vitro studies with human peripheral blood mononuclear cells (PBMC), where PBMC cells were exposed to respective PCBs for 48 h. Overall, our observation on gene expression indicated that PCB produces a unique signature affecting different pathways, specific for each congener. While analyzing these data through IPA, the prominent and interesting disease and disorders were neurological disease, cancer, cardiovascular disease, respiratory disease, as well as endocrine system disorders, genetic disorders, and reproductive system disease. They showed strong resemblances with in vitro, in vivo, and in the epidemiological studies. A distinct difference was observed in renal and urological diseases, organisimal injury and abnormalities, dental disease, ophthalmic disease, and psychological disorders, which are only revealed by PCB 138 exposure, but not in PCB 153. The present study emphasizes the challenges of global gene expression in vitro and was correlated with the results of exposed human population. The microarray results give a molecular mechanistic insight and functional effects, following PCB exposure. The extent of changes in genes related to several possible mode(s) of action highlights the changes in cellular functions and signaling pathways that play major roles. In addition to understanding the pathways related to mode of action for chemicals, these data could lead to the identification of genomic signatures that could be used for screening of chemicals for their potential to cause disease and developmental disorders.     

Genotoxicity of titanium dioxide (TiO2) nanoparticles at two trophic levels: plant and human lymphocytes

The environmental fate and behaviour of titanium dioxide (TiO(2)) nanoparticles is a rapidly expanding area of research. There is a paucity of information regarding toxic effect of TiO(2) nanoparticles in plants and to certain extent in humans. The present study focuses on the effect of exposure of TiO(2) nanoparticles in two trophic levels, plant and human lymphocytes. The genotoxicity of TiO(2) nanoparticles was evaluated using classical genotoxic endpoints, comet assay and DNA laddering technique. DNA damaging potential of TiO(2) nanoparticles in Allium cepa and Nicotiana tabacum as representative of plant system could be confirmed in the comet assay and DNA laddering experiments. In Allium micronuclei and chromosomal aberrations correlated with the reduction in root growth. We detected increased level of malondialdehyde (MDA) concentration at 4mM (0.9 μM) treatment dose of TiO(2) nanoparticles in Allium cepa. This indicated that lipid peroxidation could be involved as one of the mechanism leading to DNA damage. A comparative study of the cytotoxic and genotoxic potential of TiO(2) nanoparticles and bulk TiO(2) particles in human lymphocytes also reveal interesting results. While TiO(2) nanoparticles were found to be genotoxic at a low dose of 0.25 mM followed by a decrease in extent of DNA damage at higher concentrations; bulk TiO(2) particles reveal a more or less dose dependent effect, genotoxic only at dose 1.25 mM and above. The study thus confirms the genotoxic potential of TiO(2) nanoparticles in both plant and human lymphocytes.     

Dynamic Mechanical Behavior and Thermal Characterization of Biofilms Based on Starch Modified by Fungi Isolates

Starches modified by Ophiostoma spp. have been investigated to develop bio-materials with enhanced mechanical and physical properties for thermoplastic applications. In this study, glass transition temperature (T_g) of modified starches was investigated in both dynamic mechanical analyzer (DMA) and differential scanning calorimeter (DSC) to detect molecular changes in the starch’s structure. Overall, two thermal transitions were observed in modified starches, as opposed to one in their native counterparts. Scanning electron microscopy of granular modified starch indicated visible damages and internal structural perturbations in addition to occlusion of granular pores by extraneous materials owing to possible enzymatic degradation and production of secondary metabolites. Modified starches registered two-fold improvement in storage modulus as compared to that of native starches. From the study of second derivative of the mass loss against temperature, two thermal transitions were also identified in modified starches. X-ray diffraction analyses showed that crystalline regions of the starch granules remained intact after the modification. It is proposed that the second phase transition potentially corresponds to modified amylose fractions and/or exopolysaccharides produced by the fungi.     

Influence of activated carbon amendment on the accumulation and elimination of PCBs in the earthworm Eisenia fetida

In this study we investigated the use of activated carbon (AC) as a soil amendment for reducing bioavailability of polychlorinated biphenyls (PCBs) to the earthworm Eisenia fetida. Artificial soil was contaminated with PCBs and used in bioaccumulation experiments fresh or after aging for 19 months. PCB bioaccumulation in earthworms was reduced by 68% when AC was placed as a layer without mixing and by 94% when AC was manually mixed into the soil. Aging of the same AC mixed soil for 19 months resulted in an overall reduction of 99% in PCB biouptake. AC-treated aged soil also showed two orders of magnitude lower equilibrium aqueous concentrations of PCBs compared to untreated aged soils. The findings from this study indicate that application of engineered sorbents like AC to PCB impacted soils may greatly reduce PCB uptake at the base of the terrestrial food chain.     

Organically Modified Nanoclay and Aluminum Hydroxide Incorporated Bionanocomposites towards Enhancement of Physico-mechanical and Thermal Properties of Lignocellulosic Structural Reinforcement

A range of bio-nanocomposites were prepared by incorporation of organo modified montmorillonite nanoclay (OMMT) with or without use of aluminum hydroxide (Al(OH)₃) within polylactic acid (PLA) solution. Furthermore, the solution was employed for modification of ligno-cellulosic (jute) fabric structural reinforcements. The successful incorporation of nanofillers within the host polymer, polylactic acid (PLA) was confirmed by Fourier-transform infrared spectroscopy (FT-IR). Water uptake and swelling behaviour studies revealed that the water uptake and swelling ratio of bio-composites reduced significantly as compared to pristine jute fabric, whereas upon incorporation of OMMT and Al(OH)₃, the water barrier properties reduced even further in the developed bio-nanocomposites. The flexural strength of the bio-nanocomposites also showed improved mechanical and dimensional stability. Synergistic effects of OMMT and Al(OH)₃ were observed in enhancing the aforementioned physico-mechanical properties. Scanning electron microscopy (SEM) studies revealed microstructural details of developed samples. Similarly, the thermo-gravimetric analysis and linear burning rate studies of Al(OH)₃ treated bio-nanocomposite materials revealed enhanced thermal resistance and reduced flammability respectively compared to both pristine woven jute fabric and fabrics treated with PLA alone or those without Al(OH)₃. From the above results it can safely be said that the bio-nanocomposite material can be a prospective candidate for development of flame retardant biopackaging.     

Assessment of organochlorine pesticide residues in Indian flue-cured tobacco with gas chromatography-single quadrupole mass spectrometer

Presence of pesticide residues in tobacco increases health risk of both active and passive smokers, apart from the imminent potential health problems associated with it. Thus, monitoring of pesticide residue is an important issue in terms of formulating stringent policies, enabling global trade and safeguarding the consumer’s safety. In this study, a gas chromatography-single quadrupole mass spectrometry (GC-MS) method based upon quantifier-qualifier ions (m/z) ratio was employed for detecting and assessing ten organochlorine pesticide residues (α-HCH, β-HCH, γ-HCH, δ-HCH, 2,4-DDT, 4,4-DDT, endrin, α-endosulfan, β-endosulfan and endosulfan sulphate) in 152 flue-cured (FC) tobacco leave samples from two major tobacco growing states, Karnataka and Andhra Pradesh, of India. In the majority of samples, pesticide residue levels were below the limit of quantification (LOQ). In few samples, pesticide residues were detected and they found to comply with the guidance residue levels (GRL) specifications of the Cooperation Center for Scientific Research Relative to Tobacco (CORESTA). Detection of the phase out pesticides like DDT/HCH might be due to transfer of persistent residues from the environmental components to the plant. This is the first report on these ten organochlorine pesticide residues in Indian FC tobacco.     

Diversity of soil fungi in North 24 Parganas and their antagonistic potential against Leucinodes orbonalis Guen. (Shoot and fruit borer of brinjal)

Soil samples were collected from agricultural fields and gardens in North 24 Parganas, West Bengal, and fungi species were isolated from them. Thirty-one fungal species were isolated with 19 found in agricultural soil and 28 in garden soil. Twenty-eight out of 31 were identified using cultural and microscopic characters, and three were unidentified. The diversity of isolated fungi was calculated by Simpson’s diversity index. The garden soil possessed more fungal colonies (750) than agricultural soil (477). In agricultural soil, the dominant fungi were Aspergillus niger, Rhizopus oryzae, and Penicillium expansum, and the dominant fungi of garden soil were A. niger and Fusarium moniliforme. Simpson’s diversity index indicated that garden soil had more fungal diversity (0.939) than agricultural soil (0.896). The entomopathogenic capacity of the isolated fungi was tested against the brinjal shoot and fruit borer (Leucinodes orbonalis Guen) which is the major insect pest of brinjal. The isolated fungi were screened against larva of L. orbonalis for their entomopathogenic potential. Beauveria bassiana, A. niger, and P. expansum showed appreciable antagonism to L. orbonalis, and their lethal doses with 50 % mortality (LD₅₀s) were 4.0?×?10⁷, 9.06?×?10⁷, and 1.50?×?10⁸ spore/mL, respectively, and their times taken to reach 50 % mortality (LT₅₀s) were 9.77, 10.56, and 10.60 days, respectively. This work suggests the restriction of chemical pesticide application in agricultural fields to increase fungal diversity. The entomopathogenic efficacy of B. bassiana could be used in agricultural fields to increase fugal diversity and protect the brinjal crop.     

Monitoring variation in greenhouse gases concentration in Urban Environment of Delhi

Cities across the globe are considered as major anthropogenic sources of greenhouse gases (GHG), yet very few efforts has been made to monitor ambient concentration of GHG in cities, especially in a developing country like India. Here, variations in the ambient concentrations of carbon dioxide (CO₂) and methane (CH₄) in residential, commercial, and industrial areas of Delhi are determined from fortnightly daytime observations from July, 2008 to March, 2009. Results indicate that the average daytime ambient concentration of CO₂ varied from 495 to 554 ppm in authorized residential areas, 503 to 621 ppm in the slums or jhuggies in the unauthorized residential areas, 489 to 582 ppm in commercial areas, and 512 to 568 ppm in industrial areas with an average of 541?±?27 ppm. CH₄ concentration varied from 652 to 5,356 ppbv in authorized residential areas, 500 to15,220 ppbv in the unauthorized residential areas, 921 to 11,000 ppbv in the commercial areas, and 250 to 2,550 ppbv in the industrial areas with an average of 3,226?±?1,090 ppbv. A low mid-afternoon CO₂ concentration was observed at most of the sites, primarily due to strong biospheric photosynthesis coupled with strong vertical mixing.