Nitrogen as an indicator of mass transfer during in-situ gas sparging

Aiming at the stimulation of intrinsic microbial activity, pulses of pure oxygen or pressurized air were recurrently injected into groundwater polluted with chlorobenzene. To achieve well-controlled conditions and intensive sampling, a large, vertical underground tank was filled with the local unconfined sandy aquifer material. In the course of two individual gas injections, one using pure oxygen and one using pressurized air, the mass transfer of individual gas species between trapped gas phase and groundwater was studied. Field data on the dissolved gas composition in the groundwater were combined with a kinetic model on gas dissolution and transport in porous media. Phase mass transfer of individual gas components caused a temporary enrichment of nitrogen, and to a lower degree of methane, in trapped gas leading to the formation of excess dissolved nitrogen levels downgradient from the dissolving gas phase. By applying a novel gas sampling method for dissolved gases in groundwater it was shown that dissolved nitrogen can be used as a partitioning tracer to indicate complete gas dissolution in porous media.     

Chlorpyrifos degradation in Turkish soil

Degradation of chlorpyrifos was evaluated in laboratory studies. Surface (0-15 cm) and subsurface (40-60 cm) clay loam soils from a pesticide-untreated field were incubated in biometer flasks for 97 days at 25 degrees C. The treatment was 2 micrograms g-1 [2,6-pyridinyl-14C] chlorpyrifos, with 74 kBq radioactivity per 100 g soil flask. Evolved 14CO2 was monitored in KOH traps throughout the experiment. Periodically, soil subsamples were also methanol-extracted [ambient shaking, then supercritical fluid extraction (SFE)], then analyzed by thin-layer chromatography. Total 14C and unextractable soil-bound 14C residues were determined by combustion. From the surface and subsurface soils, 41 and 43% of the applied radiocarbon was evolved as 14CO2 during 3 months incubation. The time required for 50% loss of the parent insecticide in surface and subsurface soils was about 10 days. By 97 days, chlorpyrifos residues and their relative concentration (in surface/subsurface) as % of applied 14C were: 14CO2 (40.6/42.6), chlorpyrifos (13.1/12.4), soil-bound residues (11.7/11.4), and 3,5,6-trichloropyridinol (TCP) (3.8/4.8). Chlorpyrifos was largely extracted by simple shaking with methanol, whereas TCP was mainly removed only by SFE. The short persistence of chlorpyrifos probably relates to the high soil pH (7.9-8.1).     

Nitrogen, phosphorus, and potassium uptake by wheat and their distribution in soil following successive, annual compost applications

The overall objective of the present study was to determine the loading limits of composts that should be applied annually to irrigated wheat. We conducted a container experiment in a greenhouse during four years. It included eight treatments: sewage sludge compost (SSC) and cattle manure compost (CMC), each applied annually to a sandy soil, at rates equivalent to 3, 6, and 12 kg m(-2), and two controls, one fertilized and one unfertilized. Total dry matter (DM), grain production, and the amount of N, P, and K taken up by plants increased with increasing compost rate. Nitrogen uptake by the plants of the fertilized control was much higher than by the plants of the highest compost rate. Phosphorus and K uptake by the plants amended with the highest compost rate was much higher than by the fertilized control plants. Inorganic N quantity in the soil increased with increasing compost rate and with successive applications. The net N mineralization during the first year of wheat growth was very low, less than 3.5% of the applied organic N under all compost application rates. The contribution of the organic N mineralization increased during the second and third years. Most of the N increase in the compost treatment was found in the upper layer of 0 to 15 cm, whereas in the fertilized treatment N accumulated from the surface to the bottom of the container, 0 to 55 cm. The successive application of high rates of composts resulted in P and K accumulation in the soil profile.     

Effects of land clearing techniques and tillage systems on runoff and soil erosion in a tropical rain forest in Nigeria

This work reports runoff and soil loss from each of 14 sub-watersheds in a secondary rain forest in south-western Nigeria. The impact of methods of land clearing and post-clearing management on runoff and soil erosion under the secondary forest is evaluated. These data were acquired eighteen years after the deforestation of primary vegetation during the ‘ West bank’ project of the International Institute for Tropical Agriculture (IITA). These data are presented separately for each season; however, statistical analyses for replicates were not conducted due to differences in their past management. Soil erosion was affected by land clearing and tillage methods. The maximum soil erosion was observed on sub-watersheds that were mechanically cleared with tree-pusher/root-rake attachments and tilled conventionally. A high rate of erosion was observed even when graded-channel terraces were constructed to minimize soil erosion. In general there was much less soil erosion on manually cleared than on mechanically cleared sub-watersheds (2.5 t ha⁻¹ yr⁻¹ versus 13.8 t ha⁻¹ yr⁻¹) and from the application of no-tillage methods than from conventionally plowed areas (6.5 t ha⁻¹ yr⁻¹ versus 12.1 t ha⁻¹ yr⁻¹). The data indicate that tillage methods and appropriate management of soils and crops play an important role in soil and water conservation and in decreasing the rate of decline of soil quality.     

Fractionation of Cd,Cr, Pb and Ni in roadside soils of Uyo,Niger Delta Region: Nigeria using the optimized BCR sequential extraction technique

The optimized BCR sequential extraction procedure was applied to nine roadside soil samples for the determination of Cd, Cr, Pb and Ni. The extractable metals were isolated into three operationally defined fractions viz: acid extractable, reducible and oxidizable. The residue was treated with aqua regia solution. Metal analysis was done using flame atomic absorption spectrophotometry with air–acetylene flame. Results obtained showed the concentrations of the metals as relative abundance in the mobile phases of the samples (based on the sum of the first three fractions) are in the following order: Cd(91.9) > Pb(82.8) > Ni(49.5) > Cr(39.0). The most non-mobilizable metals were Cr and Ni which are generally lithogenic, associated with the silicate matrix, and the order is as follows: Cr(61.0) > Ni(50.5) > Pb(17.2) > Cd(8.1). The recovery of all the metals expressed as the ratio of total metal concentration to fractional sum of the optimized BCR sequential extraction procedure was of the order: Cr(95.6) > Pb(95.0) > Ni(94.8) > Cd(92.4).