阶梯形鱼道中的滚动流研究

最近,小型倾斜河流中的阶梯形鱼道建筑以它的简易与实用而变得日益重要。在这种鱼道中出现的滚动流将产生波涌,并继续向下传播,而且它的周期性滚动可能会严重危害鱼道,因此,我们着手研究了它的严重性以便设计者在设计鱼道时能考虑这些因素。由实验证实滚动流源于阶梯形鱼道的上游。滚动流在稳定流与半平滑流间转变,它在一定时间间隔内不断地从稳定流变成半平滑流,又从半平滑流变成稳定流。它的流量值随着阶梯形水道的几何形状变形而呈现上下限。流量值和时间间隔均随着水池长度的增加而增加。     

Characteristics of plankton Hg bioaccumulations based on a global data set and the implications for aquatic systems with aggravating nutrient imbalance

• Hg bioaccumulation by phytoplankton varies among aquatic ecosystems. • Active Hg uptake may exist for the phytoplankton in aquatic ecosystems. • Impacts of nutrient imbalance on food chain Hg transfer should be addressed. The bioaccumulation of mercury (Hg) in aquatic ecosystem poses a potential health risk to human being and aquatic organism. Bioaccumulations by plankton represent a crucial process of Hg transfer from water to aquatic food chain. However, the current understanding of major factors affecting Hg accumulation by plankton is inadequate. In this study, a data set of 89 aquatic ecosystems worldwide, including inland water, nearshore water and open sea, was established. Key factors influencing plankton Hg bioaccumulation (i.e., plankton species, cell sizes and biomasses) were discussed. The results indicated that total Hg (THg) and methylmercury (MeHg) concentrations in plankton in inland waters were significantly higher than those in nearshore waters and open seas. Bioaccumulation factors for the logarithm of THg and MeHg of phytoplankton were 2.4–6.0 and 2.6–6.7 L/kg, respectively, in all aquatic ecosystems. They could be further biomagnified by a factor of 2.1–15.1 and 5.3–28.2 from phytoplankton to zooplankton. Higher MeHg concentrations were observed with the increases of cell size for both phyto- and zooplankton. A contrasting trend was observed between the plankton biomasses and BAF_MeHg, with a positive relationship for zooplankton and a negative relationship for phytoplankton. Plankton physiologic traits impose constraints on the rates of nutrients and contaminants obtaining process from water. Nowadays, many aquatic ecosystems are facing rapid shifts in nutrient compositions. We suggested that these potential influences on the growth and composition of plankton should be incorporated in future aquatic Hg modeling and ecological risk assessments.     

Molecular mechanism of zinc neurotoxicity in Alzheimer’s disease

Environmental Science and Pollution Research - Zinc (Zn) is an essential trace element for most organisms, including human beings. It plays a crucial role in several physiological processes such as...     

Green synthesis,characterization, application and functionality of nitrogen-doped MgO/graphene nanocomposite

Environmental Science and Pollution Research - A facile, feasible, and green synthesis via an electrochemical exfoliation process was applied to synthesize nitrogen-doped MgO/graphene nanocomposite...     

Quality of drinking water in the Aligarh Muslim University Campus,Aligarh, U.P. (India) with respect to heavy metals

The physico-chemical characteristics of the drinking water in nine residential halls of the Aligarh Muslim University, Aligarh, U.P. (India), were studied. Nine samples each of running and standing water were taken four times over a period of one month at weekly intervals from all of the residential halls and were analysed for physico-chemical characteristics and heavy metal contents. The temperature, pH and electrical conductivity of water samples ranged between 20.0–26.0°C; 7.00–8.00 and 116.00–199.04 micromhos cm^–1 respectively whereas the values of total alkalinity, total hardness, Cl^–, SO ₄ ^– , F^–, NH₃–N, NO₂–N; NO₃–N were found between 261.00–396.00; 128.00–200.00; 8.00–69.00; 12.00–46.00; 0.90–1.35; 0.20–0.44; ND; 1.60–6.50 mg l^–1 respectively. The ranges of heavy metal concentrations in the running water samples were as follows: Cd (0.70–3.75); Cr (ND-5.00); Co (9.50–18.75); Cu (0.75–15.00); Fe (ND-13.50); Mn (3.50–51.00); Ni (7.00–17.50); Pb (0.50–2.50) and Zn (10.00–176.50) g l^–1. The heavy metal concentrations in standing water samples were found to be: Cd (1.20–4.90); Cr (ND-10.00); Co (10.25–19.00); Cu (1.75–20.00); Fe (ND-18.00); Mn (5.00–66.50); Ni (8.75–19.75); Pb (0.75–5.50) and Zn (28.60–364.00) g l^–1. The concentrations of heavy metals in drinking water supplies of the Aligarh Muslim University campus were well below the guidelines for drinking water quality as prescribed by World Health Organisation (1984). It is evident from the results that the drinking water may not cause any significant health hazard to water consumers due to heavy metals but these may be hazardous if they get accumulated in the body due to continuous consumption of water.     

Agroforestry environment,potentiality and risk in India: a remote sensing and GIS understanding

Environment, Development and Sustainability - The study utilized the tree covers per cent, agroforestry suitability, present and future (2050) climate, agriculture vulnerability (2050), percentage...     

Flotation kinetics of aluminum powders derived from waste crystalline silicon solar cells and its comparison between batch,continuous and column flotation practices

Journal of Material Cycles and Waste Management - In this study, floatability rate of aluminum (Al) powders was analyzed for the purpose of separating valuable resources from residual materials in...     

A simple spectrophotometric method for the determination of cobalt in industrial, environmental, biological and soil samples using bis(salicylaldehyde)orthophenylenediamine

Bis(salicylaldehyde)orthophenylenediamine (BSOPD) has been proposed as new analytical reagent for the direct non-extractive spectrophotometric determination of cobalt. It reacts with cobalt in slightly acidic (0.0002-0.001 M H(2)SO(4)) 50% 1,4-dioxanic medium to form a red-orange chelate with a molar ratio 1:1. The reaction is instantaneous and the maximum absorbance was obtained at 458 nm and remains constant for over 24h. The average molar absorption coefficient and Sandell's sensitivity were found to be 1.109 x 10(4)l mol(-1)cm(-1) and 20 ng cm(-2) of Co(II), respectively. Linear calibration graph was obtained for 0.1-15 mg l(-1) of Co(II) with a correlation coefficient value of 0.995 for Co-BSOPD complex. Large excess of 44 cations, anions and complexing agents do not interfere in the determination. The method was successfully used in the determination of cobalt(II) from synthetic mixture and certified reference materials for the purpose of validating the method and the results of analyses were found to be excellent agreement with those of actual values. This developed method was also used for determination of cobalt in some environmental waters (potable and polluted), biological (blood and urine) and soil samples and solution containing both cobalt(II) and cobalt(III). The results of the proposed method for biological samples were comparable with AAS and were found to be in good agreement. The method has high precision and accuracy (s=+/-0.01 for 0.5 mg l(-1)).     

Hydroxychloroquine in COVID-19: therapeutic promises,current status,and environmental implications

Environmental Science and Pollution Research - The outbreak of novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has affected the entire world with its infectious spread and...     

Photocatalytic degradation of crystal violet dye under sunlight by chitosan-encapsulated ternary metal selenide microspheres

Environmental Science and Pollution Research - Organic dyes that are extensively released in wastewater from various industries remain the priority concern in the modern world. Therefore, a novel...