pH值对亚硝酸盐氧化菌动力学及功能基因的影响

为探究pH值对亚硝酸盐氧化菌（NOB）活性动力学影响,本试验采用序批式活性污泥（SBR）反应器,以富含NOB的活性污泥为对象,基于Monod模型考察不同pH值对NOB活性动力学的影响并进行统计学分析.结果表明,Monod方程可较好地反映不同pH值条件下基质底物浓度对NOB比亚硝态氮氧化速率（SNiOR）的影响,且pH=7.0时动力学参数Ks为（6.167mg/L）,r_max为[1.134g/（g·d）],此时NOB活性最好.利用钟形经验模型进行非线性回归拟合,最大比降解速率（r_max）随pH值的增大呈钟形变化,本试验NOB的最佳pH值为（6.9±0.1）,其中r_max维持在r_opt一半以上的pH值范围（ω）为（3.26±0.4）.以亚硝酸盐氧化还原酶类基因（nxrA、nxrB）为引物,基于荧光定量PCR技术分析结果显示,在不同pH值条件下nxrA基因和nxrB基因拷贝数的变化趋势均与动力学参数（Ks、r_max）的规律一致,且nxrA和nxrB基因在系统的降解过程中起协同作用.     

2018年春节期间京津冀地区污染过程分析

为了解2018年春节期间京津冀地区空气污染情况,利用近地面污染物浓度数据、激光雷达组网观测数据,结合WRF气象要素、颗粒物输送通量和HYSPLIT气团轨迹综合分析污染过程.结果表明,春节期间出现3次污染过程.春节前一次污染过程,各站点PM_2.5浓度均未超过200μg/m³;除夕夜,廊坊站点PM_2.5峰值浓度达到504μg/m³,是清洁天气的26倍;年初二~初五,各站点PM_2.5始终高于120μg/m³,且污染主要聚集在500m高度以下,北京地区存在高空传输,800m处最大输送通量达939μg/（m³·s）,此次重污染过程为一次典型的区域累积和传输过程.京津冀地区处于严格管控状态时,燃放烟花爆竹期间PM_2.5峰值浓度可达无燃放时PM_2.5峰值的3.2倍.为防止春节期间重污染现象的发生,需对静稳天气下燃放烟花炮竹采取预防对策.     

东平湖DOM荧光特征及与氢氧同位素指标的相关性

本研究在运用三维荧光光谱示踪平水期东平湖DOM荧光特征的基础上,进一步分析其与氢氧同位素指标的相关性,并在此基础上尝试对大气降水的DOC贡献进行估算,以期为东平湖的污染控制及治理提供依据.结果表明,东平湖平水期DOM主要由类蛋白组分（C1和C4）和类腐殖质组分（C2和C3）构成,以类酪氨酸组分C1为主,C1所占比重将近50%.平水期东平湖DOM同时受陆源、内源及大气降水的影响,但以内源输入为主;外源输入中大气降水补给与大汶河输入所占比例相当;大气降水中的溶解性有机碳输入可能会对东平湖DOM产生不可忽视的影响,需进一步系统研究.氢氧稳定同位素与溶解态有机碳以及类腐殖质荧光之间呈显著相关关系,可以在一定程度上指示DOM的变化趋势.     

烟花爆竹燃放对大气污染物及PM2.5组分影响

为了解烟花爆竹燃放对保定市大气污染物和PM_2.5中水溶性离子及有机碳（OC）、元素碳（EC）浓度的影响,对保定市春节期间大气污染物和颗粒物组分的浓度特征进行了分析,并评估了烟花爆竹的贡献.结果表明： 2019年春节期间烟花爆竹集中燃放期PM_2.5、PM₁₀、SO₂、NO₂、CO平均浓度比非集中燃放期分别增加了1.3、1.0、1.1、0.4、0.02倍;保定市春节期间禁燃措施施行后,除夕、初一2d污染物平均浓度、最高浓度和高浓度持续时间均明显下降,集中燃放期烟花爆竹燃放对PM_2.5、PM₁₀和SO₂浓度贡献量从50%左右（2018年、2017年）下降至30%左右（2019年）,其中SO₂贡献量下降幅度超过PM_2.5和PM₁₀;组分分析表明,接待中心站点（主城区）、涿州站点（区县建成区）烟花爆竹燃放期K⁺、Mg²⁺、Cl^-浓度在水溶性离子中的总占比分别为39.3%、51.1%,比非燃放期的占比显著上升;烟花爆竹燃放对PM_2.5中K⁺、Mg²⁺、Cl^-浓度贡献率在50%以上,其中对K⁺贡献占比高达89.0%,涿州站点SO₄^2-、K⁺、Mg²⁺、Cl^-的贡献量分别是接待中心站点的2.2、2.1、1.9、1.8倍,燃放期硫氧化率（SOR）、氮氧化率（NOR）相比于非燃放期均有一定程度的升高;集中燃放期OC、EC浓度较非集中燃放期分别升高了2.5、2.1倍,烟花爆竹燃放对OC影响大于EC.     

Direct capture of carbon dioxide from air via lime-based sorbents

Mitigation and Adaptation Strategies for Global Change - Direct air capture (DAC) is a developing technology for removing carbon dioxide (CO2) from the atmosphere or from low-CO2-containing...     

Simulation of a 100-MW solar-powered thermo-chemical air separation system combined with an oxy-fuel power plant for bio-energy with carbon capture and storage (BECCS)

The combination of concentrated solar power–chemical looping air separation (CSP-CLAS) with an oxy-fuel combustion process for carbon dioxide (CO₂) capture is a novel system to generate electricity from solar power and biomass while being able to store solar power efficiently. In this study, the computer program Advanced System for Process Engineering Plus (ASPEN Plus) was used to develop models to assess the process performance of such a process with manganese (Mn)-based oxygen carriers on alumina (Al₂O₃) support for a location in the region of Seville in Spain, using real solar beam irradiance and electricity demand data. It was shown that the utilisation of olive tree prunings (Olea europaea) as the fuel—an agricultural residue produced locally—results in negative CO₂ emissions (a net removal of CO₂ from the atmosphere). Furthermore, it was found that the process with an annual average electricity output of 18 MW would utilise 2.43% of Andalusia’s olive tree prunings, thereby capturing 260.5 k-tonnes of CO₂, annually. Drawbacks of the system are its relatively high complexity, a significant energy penalty in the CLAS process associated with the steam requirements for the loop-seal fluidisation, and the gas storage requirements. Nevertheless, the utilisation of agricultural residues is highly promising, and given the large quantities produced globally (~?4 billion tonnes/year), it is suggested that other novel processes tailored to these fuels should be investigated, under consideration of a future price on CO₂ emissions, integration potential with a likely electricity grid system, and based on the local conditions and real data.