Profitability of intensification technologies among smallholder maize farmers in the forest-savanna transition zone of Nigeria

Sustaining the productive capacity of the land resource under the existing land-use system and increasing population pressure requires the use of appropriate technologies that will enhance farm productivity and income levels.This paper examines the effect on farm profitability of smallholder maize farmers’ use of intensification technologies in tropical agriculture. The survey was conducted in southwest Nigeria. A multi-stage sampling technique was used to select 300 respondents from two major agroclimatic zones in Osun State. Primary data were collected using a structured questionnaire and complemented with focus group discussions (FGDs), while the State’s Ministry of Agriculture provided secondary data.Pressure on land was found high because farmland was continuously cropped for an average of 10 years with a mean fallow period of 2 years only. Technologies used to intensify agriculture included inorganic fertilizer, organic manure, alley cropping, and tree planting.Results from costs and returns analysis showed that average net returns to inorganic fertilizer use ranked highest in the two zones, while tree planting ranked lowest. There was a significant ecoregional difference on the average net returns/year earned by users of mineral fertilizer. While organic manure use earned higher net returns than alley cropping practice in the rain forest, the reverse was the case for the derived savanna. FGDs revealed that respondents’ preferred to use inorganic fertilizer despite its inadequate supply because, apart from enhancing higher returns and net gains, it also improved output level and provided an opportunity for the continuous use of the scarce land.These results imply that economic returns play a critical role in farmers’ use of intensification technologies and consequently affect their resource management decisions. Policy measures aimed at promoting research on appropriate technologies that are profitable on farmers’ fields will be more effective in enhancing farmers’ use of intensification technologies.     

Emergy as a tool for Ecodesign: evaluating materials selection for beverage packages in Brazil

The life of a product begins with the initial product design concepts; the costs and potential impacts of a product are heavily influenced by the final design, the production processes, the economic and environmental costs of all raw materials. Additionally, both of these factors are very much affected by how the products are managed during and after consumer usage. Thus, there is an urgent need for a tool to facilitate the integration and assessment of environmental and economic demands into the product planning and development processes. The introduction of environmental accounting based on emergy as a tool to assist in product design is proposed. This complementary tool may be inserted into the conventional design methodology to facilitate in the selection of materials and processes as well as in the actual design of the products. To illustrate the application of the proposed method for material selection, PET (polyethylene terephthalate) bottles and aluminum cans for beverage packaging are compared. Despite the exceptional condition of aluminum recycling in Brazil, results show that the best option for beverage packages is the PET bottles.     

Simulation and life cycle assessment of process design alternatives for biodiesel production from waste vegetable oils

This study uses the process simulator ASPEN Plus^® and Life Cycle Assessment (LCA) to compare three process design alternatives for biodiesel production from waste vegetable oils that are: the conventional alkali-catalyzed process including a free fatty acids (FFAs) pre-treatment, the acid-catalyzed process, and the supercritical methanol process using propane as co-solvent. Results show that the supercritical methanol process using propane as co-solvent is the most environmentally favorable alternative. Its smaller steam consumption in comparison with the other process design alternatives leads to a lower contribution to the potential environmental impacts (PEI’s). The acid-catalyzed process generally shows the highest PEI’s, in particular due to the high energy requirements associated with methanol recovery operations.     

A novel gas purification system for biologically produced gases

A novel gas purification system employing membrane contactors with dense membranes in the absorption as well as the desorption unit has been tested concerning the separation efficiency of CO₂. The separation efficiency of potassium carbonate (K₂CO₃) promoted by piperazine (PZ) as absorption medium has been tested in the absorption unit. Since the absorbent will be regenerated in the desorption unit, the influence of temperature, sweep flow rate and absorbent type (0.5 M K₂CO₃ and 0.5 M K₂CO₃/0.5 M PZ) on the separation efficiency of CO₂ in the desorption unit has been investigated. Desorption by vacuum has been considered as well.In addition experimental results of the coupling of a bioreactor producing hydrogen by anoxygenic photosynthesis (low and fluctuating product gas flow rates and fluctuating compositions) with a membrane contactor for gas purification are reported. This was done in order to show the applicability of this system to processes producing biogases.     

Valuing deaths or years of life lost? Economic benefits of avoided mortality from early heat warning systems

The study aims to explore the main drivers influencing the economic appraisal of heat warning systems by integrating epidemiological modelling and benefit-cost analysis. To shed insights on heat wave mortality valuation, we consider three valuation schemes: (i) a traditional one, where the value of a statistical life (VSL) is applied to both displaced and premature mortality; (ii) an intermediate one, with VSL applied for premature mortality and value of a life year (VOLY) for displaced mortality; and (iii) a conservative one, where both premature and displaced mortality are quantified in terms of loss of life expectancy, and then valued using the VOLY approach. When applying these three schemes to Madrid (Spain), we obtain a benefit-cost ratio varying from 12 to 3700. We find that the choice of the valuation scheme has the largest influence, whereas other parameters such as attributable risk, displaced mortality ratio, or the comprehensiveness and effectiveness of the heat warning system are less influential. The results raise the question of which is the most appropriate approach to value mortality in the context of heat waves, given that the lower bound estimate for the benefit-cost ratio (option iii using VOLY) is up to two orders of magnitude lower than the value based on the traditional VSL approach (option i). The choice of the valuation methodology has significant implications for public health authorities at the local and regional scale, which becomes highly relevant for locations where the application of the VOLY approach could lead to benefit-cost ratios significantly lower than 1. We propose that specific metrics for premature and displaced VOLYs should be developed for the context of heat waves. Until such values are available, we suggest testing the economic viability of heat warning systems under the three proposed valuation schemes (i–iii) and using values for VOLY commonly applied in air pollution as the health end points are similar. Lastly, periodical reassessment of heat alert plans should be performed by public health authorities to monitor their long-term viability and cost-effectiveness.     

Environmental Surveillance for Noroviruses in Selected South African Wastewaters 2015–2016: Emergence of the Novel GII.17

Norovirus (NoV) GII.4 is the predominant genotype associated with gastroenteritis pandemics and new strains emerge every 2–3 years. Between 2008 and 2011, environmental studies in South Africa (SA) reported NoVs in 63% of the sewage-polluted river water samples. The aim of this study was to assess whether wastewater samples could be used for routine surveillance of NoVs, including GII.4 variants. From April 2015 to March 2016, raw sewage and effluent water samples were collected monthly from five wastewater treatment plants in SA. A total of 108 samples were screened for NoV GI and GII using real-time RT-qPCR. Overall 72.2% (78/108) of samples tested positive for NoVs with 4.6% (5/108) GI, 31.5% (34/108) GII and 36.1% (39/108) GI + GII strains being detected. Norovirus concentrations ranged from 1.02 × 10² to 3.41 × 10⁶ genome copies/litre for GI and 5.00 × 10³ to 1.31 × 10⁶ genome copies/litre for GII. Sixteen NoV genotypes (GI.2, GI.3, GI.4, GI.5, GI.6, GII.2, GII.3, GII.4, GII.7, GII.9, GII.10, GII.14, GII.16, GII.17, GII.20, and GII.21) were identified. Norovirus GII.2 and GII.17 co-dominated and the majority of GII.17 strains clustered with the novel Kawasaki 2014 variant. Sewage surveillance facilitated detection of Kawasaki 2014 in SA, which to date has not been detected with surveillance in children with gastroenteritis <5 years of age. Combined surveillance in the clinical setting and environment appears to be a valuable strategy to monitor emergence of NoV strains in countries that lack NoV outbreak surveillance.     

Dynamics of skeleton formation in the Lake Baikal sponge Lubomirskia baicalensis. Part II. Molecular biological studies

In a preceding study it has been reported that the freshwater sponge Lubomirskia baicalensis, living in Lake Baikal (East Siberia), is composed of spicules forming a characteristic pattern which follows radiate accretive growth. Here we report that the spicules are synthesized by the enzyme silicatein, a protein which is related to cathepsin L. The cDNAs for silicatein and the related cathepsin L were isolated and used as probes to show that the mRNA levels of silicatein in the bases of the spicule skeleton of the animals are low, while the mRNA level of cathepsin L in this region exceeds that of the growing zone. This is the first comprehensive study on the importance of the axial filament/silicatein as an essential structural and functional component determining the growth and stability of demosponge spicules.Note: Sequences from Lubomirskia baicalensis have been deposited in the EMBL/GenBank; cDNAs for the putative silicatein (LBSILICA) are deposited under the accession no. AJ786771 and for cathepsin L (LBCATL) under the accession no. AJ786770.