Exposure to ionizing radiations and changes in blood cells and interleukin-6 in radiation workers

Environmental Science and Pollution Research - Long-term exposure to ionizing radiation (IR) can cause dire health consequences even less than the dose limits. Previous biomonitoring studies have...     

Interaction between meteorological parameters and COVID-19: an ecological study on 406 authorities of the UK

Environmental Science and Pollution Research - Understanding the factors affecting COVID-19 transmission is critical in assessing and mitigating the spread of the pandemic. This study investigated...     

Effects of Logged and Unlogged Forest Patches on Avifaunal Diversity

In the Hyrcanian forests of northern Iran, reduced-impact silviculture systems, (single-tree and group-tree selection) were applied over a large area, which generated different local habitat structures. The aim of this study was to assess the differences between treated and untreated areas of forest and their effect on avian richness, abundance and diversity (R.A.D). Birds were surveyed during the breeding season in 2009 by 100-point counts, equally distributed in the treated and untreated area. Avian R.A.D was significantly different and higher in the untreated area. Generally, forestry practices cause noticeable changes in canopy percentage, tree composition, snags and shrub number. Treated forest habitats in the area of study had a much more developed understory, fewer snags and fewer large diameter trees. The results highlighted the importance of forest maturity and showed that preventing silvicultural disturbances may not be the best solution for conserving and enhancing biodiversity. Rather, methods such as selective cutting seem an appropriate and sustainable way of forest management. It is suggested that forests should be managed to conserve structural elements which create favorable habitat for bird species, preventing future species losses due to logging practices.     

Determination of tolerable and toxic salt concentrations in drinking water in rat,pig, and rabbit

In some geographical areas human and animal populations are compelled to use salty water. In this study, tolerable and toxic salt concentrations were evaluated in rat, pig, and rabbit. Ninety Wistar rats weighing approximately 250 g were allocated to nine groups for study. For treatment, distilled water, 0.5, 1, 1.2, 1.4, 1.6, 1.8 or 2% salt (NaCl) concentrations were consumed by test groups, while the control group consumed Zanjan potable water. All animals were observed twice daily for mortality or evidence of morbidity. Serum sodium levels and plasma osmolarity were measured at the onset of experiment and 120 h later. Similar experimental conditions were employed in pig and rabbit. Rat tolerated 0.5, 1, and 1.2% NaCl concentrations in drinking water but higher concentrations were toxic and life threatening, accompanied by significantly increased serum sodium levels and plasma osmolarity. This study showed that pig was the most sensitive and rabbit the most resistant species to different NaCl concentrations. Although NaCl concentrations lower than 1.4% was considered as tolerable in rat, the animal health was affected. NaCl concentrations of 1.4% and higher may jeopardize animal health and were considered as toxic amounts.     

Determination of first-order landfill gas modeling parameters and uncertainties

Using first-order kinetic empirical models to estimate landfill gas (LFG) generation and collection rates is well recognized in the literature. The uncertainty in the estimated LFG generation rates is a major challenge in evaluating performance of LFG collection and LFG to energy facilities. In this investigation, four methods for quantifying first-order LFG generation model parameters, methane generation potential, L₀, and methane generation rate constant, k, were evaluated. It was found that the model is insensitive to the approach taken in quantifying the parameters. However, considering the recognition of using the model in the literature, the optimum method to estimate L₀ and k is to determine L₀ using disposed municipal solid waste composition and laboratory component specific methane potential values. The k value can be selected by model fitting and regression using the first-order model if LFG collection data are available. When such data are not available, k can be selected from technical literature, based on site conditions. For five Florida case-study landfills L₀ varied from 56 to 77 m³ Mg⁻¹, and k varied from 0.04 to 0.13 yr⁻¹ for the traditional landfills and was 0.10 yr⁻¹ for the wet cell. Model predictions of LFG collection rates were on average lower than actual collection. The uncertainty (coefficient of variation) in modeled LFG generation rates varied from ±11% to ±17% while landfills were open, ±9% to ±18% at the end of waste placement, and ±16% to ±203% 50 years after waste placement ended.     

The role of land use change on the sustainability of groundwater resources in the eastern plains of Kurdistan,Iran

In this study, land use change and its effects on level and volume of groundwater were investigated. Using satellite images and field measurements, change in land uses was determined from 1998 to 2007. By analyzing the observation wells data and preparing the zoning maps in GIS, groundwater level fluctuations were assessed. Considering the area corresponding to these fluctuations, changes in aquifers volume were calculated. The rain gauge and synoptic stations data were used to calculate meteorological parameters and evapotranspiration. The water requirement of the main crops was determined by CROPWAT software. Results showed an increase in average rainfall and crops water requirement. The classification of satellite images showed that 11,800 ha was increased in lands under irrigated crops cultivation, while 27,655 ha of rangeland was declined in the region. Groundwater levels dropped an average of 7 m, equal to 63.4 MCM reductions in volume of water in the aquifer.     

Investigation of the Thermosensitive Nanosphere Polymer in Removing Organophosphorus Pesticides from Water and Its Isotherm Study (Case Study: Diazinon)

In this research, a novel thermosensitive nanosphere polymer (TNP) was synthesized by copolymerization of N-isopropylacrylamide with 3-allyloxy-1,2-propanediol for the removal of diazinon from water. The characterization of the synthesized adsorbent has been performed by Fourier transform infrared spectrometer, scanning electron microscopy and elemental analysis. Batch adsorption method was performed to investigate the influences of various parameters like pH, temperature and contact time on the adsorption of diazinon. The equilibrium adsorption data of diazinon by TNP was studied by Langmuir, Freundlich, Temkin and Redlich–Peterson model. According to equilibrium adsorption results, the Langmuir, Freundlich and Temkin constants were evaluated to be 0.912 (L/mg), 7.916 (mg/g) (L/mg)^1/n and 2.494 respectively at pH 7 and room temperature. Based on Redlich–Peterson model analysis, the equilibrium data for the adsorption of diazinon was conformed well to the Langmuir isotherm model. This method was successfully applied for removal of diazinon from environmental samples. Moreover, in reusing of TNP, the sorption capacity was maintained without any significant change after 10 cycles of sorption–desorption process.     

The concentration of potentially toxic elements (PTEs) in apple fruit: a global systematic review,meta-analysis,and health risk assessment

Environmental Science and Pollution Research - The presence of potentially toxic elements (PTEs) in crops can directly/indirectly affect consumers’ health. The contamination of apple as one...     

A market modeling review study on predicting Malaysian consumer behavior towards widespread adoption of PHEV/EV

With the rising concern about climate change, there has been an increased public awareness that has resulted in new government policies to support scientific research for mitigating these problems. Malaysia is among the major energy-intense countries and is under an excessive burden to advance its energy efficiency and to also work towards the reduction of its carbon emission. Plug-in hybrid electric vehicles (PHEVs) have the potential to lessen the carbon emission and gasoline consumption in order to alleviate environmental problems. Most of the energy problems linked to the increasing transportation pollution are now being reduced with the solution of the adoption of PHEVs. PHEVs are seen as a solution to cut carbon emission, which prevents environmental damages. Furthermore, PHEVs’ driving range and performance can be comparable to the other hybrid vehicles as well as the conventional IC engines that have gasoline and diesel tanks. Thus, many efforts are being initiated to promote the use of PHEVs as an innovative and affordable transportation system. In order to achieve making the consumers aware of the adoption of PHEVs, we used a model which is based on the extended theory of planned behavior (TPB). This review is based on the factors affecting the adoption of PHEVs among Malaysian consumers. The model takes into account the ten key features that influence the adoption of PHEVs, such as environmental concern, personal norm, attitude, vehicle ownership costs, driving range, charging time, intention, subjective norm, perceived behavioral control, and personal norm. All these constructs are drivers towards the adoption of PHEVs. These factors affect the relationship between the adoption of PHEVs and how consumers intend to protect the environment. This review is based on improving how the “attitude-action” gap is understood as it is an important element for further studies on PHEVs. The aim of the research is to come up with a framework that examines how to modify the consumer’s environmental concerns in acquiring PHEVs. This will pave the way for more academic research and future works that can emphasize how to obtain empirical results. The authors’ recommendation is that, before a consumer’s behavior is assessed and considered, an observation of the current technology is needed with methods and knowledge of the existing technology adoption aspect.     

Dust explosion hazard assessment

The majority of powders that are used in the processing industries are combustible (also referred to as flammable, explosible). An explosion will occur if the concentration of the combustible dust that is suspended in air is sufficient to propagate flame when ignited by a sufficiently energetic ignition source.A systematic approach to identifying dust cloud explosion safety against their consequences generally involves:-Identification of locations where combustible dust cloud atmospheres could be present-Understanding of the explosion characteristics of the dust(s)-Identification of potential ignition sources that could be present under normal and abnormal conditions-Proper process and facility design to eliminate and/or minimize the occurrence of dust explosions and protect people and facilities against their consequences-Adequate maintenance of facilities to prevent ignition sources and minimize dust releaseThis presentation will discuss the conditions that are required for dust cloud explosions to occur and presents a well-tried approach to identify, assess, and eliminate/control dust explosion hazards in facilities.