Treatment of dairy manure using the microwave enhanced advanced oxidation process under a continuous mode operation

The microwave enhanced advanced oxidation process (MW/H₂O₂-AOP) was used to treat dairy manure for solubilization of nutrients and organic matters. This study investigated the effectiveness of the MW/H₂O₂-AOP under a continuous mode of operation, and compared the results to those of batch operations. The main factors affecting solubilization by the MW/H₂O₂-AOP were heating temperature and hydrogen peroxide dosage. Soluble chemical oxygen demand (SCOD) and volatile fatty acids (VFA) increased with an increase of microwave (MW) heating temperature; very high concentrations were obtained at 90°C. Insignificant amounts of ammonia and reducing sugars were released in all runs. An acidic pH condition was required for phosphorus solubilisation from dairy manure. The best yield was obtained at 90°C with an acid dosage of 1.0 %; about 92 % of total phosphorus and 90 % of total chemical oxygen demand were in the soluble forms. The MW/H₂O₂-AOP operated in a continuous operation mode showed pronounced synergistic effects between hydrogen peroxide and microwave irradiation when compared to a batch system under similar operating conditions, resulting in much better yields.     

Modelling the biphasic sorption of simazine,imidacloprid, and boscalid in water/soil systems

The sorption kinetics of simazine (6-chloro-N,N′-diethyl-1,3,5-triazine-2,4-diamine), imidacloprid (1-(6-chloro-3-pyridylmethyl)-N-nitroimidazolidin-2-ylideneamine), and boscalid (2-chloro-N-(4′-chlorobiphenyl-2-yl)nicotinamide), three pesticides of wide use in agriculture, was determined in five different water/soil systems over a time interval from the initial few seconds to about 1 month. In all the experiments, sorption kinetics showed a biphasic pattern characterized by an initial, relatively short phase with a high sorption rate and a later phase with much a lower sorption rate. Initial sorption capacity increased with soil organic carbon content and with sorbate hydrophobicity. We postulate that the first phase of the process involves a fast second-order sorption reaction on superficial sites of soil particles, whereas the second phase depends on diffusion-controlled migration to internal binding sites. A kinetic equation based on this hybrid model accurately fitted all data sets. Less satisfactory results were obtained employing the pseudo-first order, pseudo-second order, Elovich, two site non-equilibrium, or Weber-Morris equation. The superior performance of the hybrid model for describing boscalid sorption probably reflects the high hydrophobic character and consequent low diffusion rates of this compound. The accuracy of modelling was in any case strongly dependent on the time interval considered.     

Removal of Pb and MDF from contaminated soils by EDTA- and SDS-enhanced washing

Heavy metal- and organic-contaminated sites are ubiquitous, but few studies have been conducted to address such an issue. EDTA- and SDS-enhanced washing was studied for remediation of Pb- and/or marine diesel fuel (MDF)-contaminated soils. The feasibility of recovery and reuse of EDTA and SDS, as well as the physicochemical interactions among the chemical agents, contaminants and soils were extensively investigated using batch experiments. The optimal washing sequence was then determined. The experimental results showed that EDTA could be recovered and reused for four cycles without significant loss of its chelating capacity, while the extraction capability of SDS was noticeably reduced after each reuse cycle. The free phase of marine diesel fuel (MDF) in soils physically isolated the sorbed Pb on soils and thus reducing its extraction by EDTA. The presence of SDS alone or together with low concentration of EDTA was found to enhance Pb removal probably via electrostatic interaction and dissolution of soil organic matter. However, it hindered Pb extraction by high concentration of EDTA, because of the potential formation of complexes between some strongly-bound Pb and SDS, that are more resistant to desorption. Therefore, EDTA washing followed by SDS achieved the highest Pb removal efficiency. On the other hand, MDF removal by SDS was significantly hindered by coexisting Pb in soils, probably because the formation of Pb-dodecyl sulfate (DS) complex would decrease the effective amount of SDS available for forming micelles in solution and enhance MDF sorption. EDTA alone or together with SDS could enhance MDF removal, but the residual MDF after EDTA-washing became more resistant to SDS removal. Consequently, SDS washing followed by EDTA is considered as the optimal washing sequence for MDF removal.     

Assessment of susceptibility of olive cultivars to the Bactrocera oleae (Gmelin, 1790) and Camarosporium dalmaticum (Thüm.) Zachos & Tzav.-Klon. attacks in Calabria (Southern Italy)

Within the framework of research concerning the application of techniques alternative to chemical pesticides for control of parasites, the C.R.A. Experimental Institute for Olive Growing for many years has been performing a large investigation in order to detect sources of genetic resistance in olive germplasm. In the present study we observed the behavior related to the olive fly (Bactrocera oleae) infestation and Camarosporium dalmaticum infection of ten olive cultivars farmed under the same agronomic and climatic conditions in Calabria, Southern Italy. The sampling and the data collecting were carried out in three different ripening times.The drupe amount of oleuropein and cyanidine was detected by laboratory analyses in order to verify a possible correlation between these molecules and the level of infestation/infection of the above-mentioned parasites. The obtained data were submitted to analysis of variance. In relation to the fungal infection the results displayed that cvs Tonda nera dolce showed the lowest susceptibility, while the cv Giarraffa turned out to be the most susceptible. The less susceptible cultivars to the phytophagous were Tonda nera dolce and Bhardi Tirana. Since the less susceptible cultivar to olive fly attacks are the same observed in relation to the susceptibility to olive fruit rot, it is suggested a relation between the olive fly infestation and the fungal infection. It suggests the utility to achieve these results both to transfer directly to the farmers' world and to emphasize ecosystem health and biodiversity conservation.     

Effect of spatial variability of storm on the optimal placement of best management practices (BMPs)

It is significant to design best management practices (BMPs) and determine the proper BMPs placement for the purpose that can not only satisfy the water quantity and water quality standard, but also lower the total cost of BMPs. The spatial rainfall variability can have much effect on its relative runoff and non-point source pollution (NPSP). Meantime, the optimal design and placement of BMPs would be different as well. The objective of this study was to discuss the relationship between the spatial variability of rainfall and the optimal BMPs placements. Three synthetic rainfall storms with varied spatial distributions, including uniform rainfall, downstream rainfall and upstream rainfall, were designed. WinVAST model was applied to predict runoff and NPSP. Additionally, detention pond and swale were selected for being structural BMPs. Scatter search was applied to find the optimal BMPs placement. The results show that mostly the total cost of BMPs is higher in downstream rainfall than in upstream rainfall or uniform rainfall. Moreover, the cost of detention pond is much higher than swale. Thus, even though detention pond has larger efficiency for lowering peak flow and pollutant exports, it is not always the determined set in each subbasin.     

Uncertainty in watershed response predictions induced by spatial variability of precipitation

Negligence to consider the spatial variability of rainfall could result in serious errors in model outputs. The objective of this study was to examine the uncertainty of both runoff and pollutant transport predictions due to the input errors of rainfall. This study used synthetic data to represent the “true” rainfall pattern, instead of interpolated precipitation. It was conducted on a synthetic case area having a total area of 20 km² with ten subbasins. Each subbasin has one rainfall gauge with synthetic precipitation records. Six rainfall storms with varied spatial distribution were generated. The average rainfall was obtained from all of the ten gauges by the arithmetic average method. The input errors of rainfall were induced by the difference between the actual rainfall pattern and estimated average rainfall. The results show that spatial variability of rainfall can cause uncertainty in modeling outputs of hydrologic, which would be transport to pollutant export predictions, when uniformity of rainfall is assumed. Since rainfall is essential information for predicting watershed responses, it is important to consider the properties of rainfall, particularly spatial rainfall variability, in the application of hydrologic and water quality models.     

Lignin/Poly(ε-Caprolactone) Blends with Tuneable Mechanical Properties Prepared by High Energy Ball-Milling

Polymer blends between lignin, a natural, widely available, no-cost material, and Poly(ε-caprolactone) (PCL), a biodegradable polymer, have been prepared using the ‘clean’, friendly to the environment, technique of the High Energy Ball Milling (HEBM). Two kinds of lignin have been used, Straw lignin, obtained through the Steam Explosion process (SE lignin), and/or Lignosulphonated one (LS lignin). The tensile mechanical tests have shown that, at certain specific compositions, the blends, in particular those with both SE and LS lignin, have good mechanical properties. In particular, by varying the blend composition it is possible to obtain materials with tuneable properties, therefore useful for different applications. Dynamic-Mechanical-Thermal Analysis (DMTA) reveals substantial immiscibility of the blends. Experiments of UV irradiation show that lignin acts as an UV stabilizer for PCL. The effect is higher with SE lignin, likely due to its low molecular weight, which allows the short lignin chains to diffuse more easily within the amorphous regions of PCL.     

Contribution of vehicular traffic and industrial facilities to PM10 concentrations in a suburban area of Caserta (Italy)

PM10 levels have been recorded in the suburban area of Caserta (Italy) from February to October 2012. The daily limit was exceeded in 13 % of the determinations, with no significant difference between weekdays and weekends. Benzo[a]pyrene concentrations were in the range 0.01–0.46 ng/m³, thus, never exceeding the National Standard. The B(a)P-eq was 0.20 ng/m³. PM10 peaks were associated with wind from east–northeast. The same was observed for Ca concentrations, whereas no relation with wind direction was observed for organic pollutants. The results point to a local limestone quarry and cement factory as the likely major source of PM10 pollution in the area investigated.     

Treatment of dairy manure using the microwave enhanced advanced oxidation process under a continuous mode operation

The microwave enhanced advanced oxidation process (MW/H(2)O(2)-AOP) was used to treat dairy manure for solubilization of nutrients and organic matters. This study investigated the effectiveness of the MW/H(2)O(2)-AOP under a continuous mode of operation, and compared the results to those of batch operations. The main factors affecting solubilization by the MW/H(2)O(2)-AOP were heating temperature and hydrogen peroxide dosage. Soluble chemical oxygen demand (SCOD) and volatile fatty acids (VFA) increased with an increase of microwave (MW) heating temperature; very high concentrations were obtained at 90°C. Insignificant amounts of ammonia and reducing sugars were released in all runs. An acidic pH condition was required for phosphorus solubilisation from dairy manure. The best yield was obtained at 90°C with an acid dosage of 1.0 %; about 92 % of total phosphorus and 90 % of total chemical oxygen demand were in the soluble forms. The MW/H(2)O(2)-AOP operated in a continuous operation mode showed pronounced synergistic effects between hydrogen peroxide and microwave irradiation when compared to a batch system under similar operating conditions, resulting in much better yields.