Upstream flood pattern recognition based on downstream events

Reverse stream flood routing determines the upstream hydrograph in a stream reach given the downstream hydrograph. The Muskingum model of flood routing involves parameters that govern the routed hydrograph. These parameters are herein estimated using simulation methods coupled with optimization tools to achieve optimized parameters. Different simulation methods are shown to perform unequally in the estimation of nonlinear Muskingum parameters. This paper presents two simulation methods for nonlinear Muskingum reverse flood routing: (1) Euler equations and (2) Runge-Kutta 4th order equations. Moreover, the generalized reduced gradient (GRG) is used as the optimization tool that minimized the sum of the squared deviations (SSQ) between observed and routed inflows in a benchmark flood routing problem. Results show the Runge-Kutta 4th order equations yield better routed hydrographs with smaller SSQ than obtained in previous research and with the first simulation method (Euler equations).     

Physical and numerical modelling of tsunami generation by a moving obstacle at the bottom boundary

This paper presents a study of the waves generated by a solid block landslide moving along a horizontal boundary. The landslide was controlled using a mechanical system in a series of physical experiments, and laser-induced fluorescence measurements resolved both spatial and temporal variations in the free surface elevation. During its constant-velocity motion, the landslide transferred energy into ‘trapped’ offshore-propagating waves within a narrow frequency band. The wave trapping is demonstrated by investigating the wave dispersion characteristics using a two-dimensional Fourier Transform. The first of the trailing waves broke at Froude numbers greater than or equal to 0.625. The parametric dependence of the largest-amplitude waves and the potential energy within the wave field are discussed. The experimental results were compared to the predictions of an incompressible Navier–Stokes solver with and without turbulence models. The numerical model under-predicted the measured wave amplitudes, although it accurately predicted the measured wave phasing. The turbulent model more accurately predicted the shapes of the trailing waves. Both experimental and numerical results confirmed that investigations into wave generation by submerged objects moving at constant velocity should also consider the initial acceleration of the object, as this affects the overall evolution of the wave field. The applicability of the horizontal-boundary results to more realistic field scenarios is discussed.     

PCDD/Fs in ambient air in north-east Italy: The role of a MSWI inside an industrial area

The stack gases of a municipal solid waste incinerator (MSWI), and ambient air were sampled in four locations around the plant for the analysis of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs). The sampling area was close to an industrial area near Trieste, in north-east Italy. The purpose of the study was to estimate the impact of the MSWI emissions and to distinguish the contribution of these emissions from other potential emission sources in the industrial area.PCDD/F atmospheric concentrations were similar to those generally detected in urban–rural areas with one location about 2–3 times more contaminated than the others. Since the most contaminated location was inside the industrial area but upwind of the MSWI, principal component analysis (PCA) was used to establish whether other sources were the cause. This analysis clearly showed that a local steel plant’s emission was the main source of PCDDs/Fs in ambient air. This study highlights the usefulness of multivariate data analysis such as PCA to identify, among different potential emission sources, the one really responsible for the contamination.     

Darcian preferential water flow and solute transport through bimodal porous systems: Experiments and modelling

Soils often exhibit a variety of small-scale heterogeneities such as inter-aggregate pores and voids which partition flow into separate regions. In this paper a methodological approach is discussed for characterizing the hydrological behaviour of a heterogeneous clayey–sandy soil in the presence of structural inter-aggregate pores. For the clay soil examined, it was demonstrated that, coupling the transfer function approach for analyzing BTCs and water retention data obtained with different methods from laboratory studies captures the bimodal geometry of the porous system along with the related existence of fast and slow flow paths. To be effectively and reliably applied this approach requires that the predominant effects of the soil hydrological behaviour near saturation be supported by accurate experimental data of both breakthrough curves (BTCs) and hydraulic functions for high water content values. This would allow the separation of flow phases and hence accurate identification of the processes and related parameters.     

Degradation of greenhouse twines derived from natural fibers and biodegradable polymer during composting

Commercial composting operations generally do not accept organic wastes with plastic twines from the greenhouse vegetable industry and the bulk of the waste materials ends up in landfills. The objectives of this paper are to identify environmentally compatible substitutes that could replace the current use of petrochemically derived plastic twines in greenhouse vegetable production, thus diverting them from landfills, and to assess the extent of their degradation via composting. Physical properties of the twines, including linear density, percent weight loss and tensile strength were monitored for the biodegradation tests. A pilot-scale composting trial was conducted in an in-vessel composting system. Results showed that the three biodegradable twine materials (cotton, jute and EcoPLA) could degrade readily in a composting environment within a reasonable time frame. Specifically, at the end of 105 days of composting, 85.3%, 84.8% and 81.1% of weight loss was observed for cotton, jute and EcoPLA, respectively. Furthermore, EcoPLA exhibited a slower decline in tensile strength with time, when compared to jute and cotton.     

Medical waste production at hospitals and associated factors

This study was conducted to evaluate the quantities of medical waste generated and the factors associated with the generation rate at medical establishments in Taiwan. Data on medical waste generation at 150 health care establishments were collected for analysis in 2003. General medical waste and infectious waste production at these establishments were examined statistically with the potential associated factors. These factors included the types of hospital and clinic, reimbursement payment by National Health Insurance, total number of beds, bed occupancy, number of infectious disease beds and outpatients per day. The average waste generation rates ranged from 2.41 to 3.26kg/bed/day for general medical wastes, and 0.19-0.88kg/bed/day for infectious wastes. The total average quantity of infectious wastes generated was the highest from medical centers, or 3.8 times higher than that from regional hospitals (267.8 vs. 70.3Tons/yr). The multivariate regression analysis was able to explain 92% of infectious wastes and 64% of general medical wastes, with the amount of insurance reimbursement and number of beds as significant prediction factors. This study suggests that large hospitals are the major source of medical waste in Taiwan. The fractions of medical waste treated as infectious at all levels of healthcare establishments are much greater than that recommended by the USCDC guidelines.     

Distribution of Cd and As in organs and tissues of four marine mammal species stranded along the Italian coasts

Concentrations of Cd and As were determined in organs and tissues (muscle, heart, kidney, lung and liver) of four cetacean species (Stenella coeruleoalba, Truncatus truncatus, Grampus griseus and Ziphius cavirostris) stranded along the Italian coasts during the period 2000-2009. Significant differences were found between Cd concentrations in the different analysed tissues. Particularly, the kidney shows the highest concentrations of Cd in all analysed specimens, followed by the liver. No systematic or statistically significant difference in As concentrations was found in the analysed tissues. Considerable differences of Cd and As values in samples from different geographical areas (Sicily Channel, Adriatic Sea and Tyrrhenian Sea) were found, with the highest values measured in samples from the Sicily Channel. This basically suggests that anthropogenic and natural sources significantly affect Cd and As content in cetaceans.     

In vivo microspectroscopy monitoring of chromium effects on the photosynthetic and photoreceptive apparatus of Eudorina unicocca and Chlorella kessleri

In microorganisms and plants, chromium (Cr) is not essential for any metabolic process, and can ultimately prove highly deleterious. Due to its widespread industrial use, chromium has become a serious pollutant in diverse environmental settings. The presence of Cr leads to the selection of specific algal populations able to tolerate high levels of Cr compounds. The varying Cr-resistance mechanisms displayed by microorganisms include biosorption, diminished accumulation, precipitation, reduction of Cr(6+) to Cr(3+), and chromate efflux. In this paper we describe the effects of Cr(6+) (the most toxic species) on the photosynthetic and photoreceptive apparatus of two fresh water microalgae, Eudorina unicocca and Chlorella kessleri. We measured the effect of this heavy metal by means of in vivo absorption microspectroscopy of both the thylakoid compartments and the eyespot. The decomposition of the overall absorption spectra in pigment constituents indicates that Cr(6+) effects are very different in the two algae. In E. unicocca the metal induced a complete pheophinitization of the chlorophylls and a modification of the carotenoids present in the eyespot after only 120 h of exposition at a concentration equal or greater than 40 microM, which is the limit for total Cr discharge established by US EPA regulations. In C. kessleri, chromium concentrations a hundred times higher than this limit had no effect on the photosynthetic machinery. The different tolerance level of the two algae is suggested to be due to the different properties of the mucilaginous envelope and cell wall covering, respectively, the colonies of Eudorina and the single cells of Chlorella, which binds chromium cations to a different extent.     

Heavy metal (As,Cd, Hg,Pb, Cu,Zn, Se) concentrations in muscle and bone of four commercial fish caught in the central Adriatic Sea,Italy

Heavy metal (As, Cd, Cu, Pb, Zn, Hg and Se) concentrations in the muscle and bone of four fish species (Mullus barbatus, Merluccius merluccius, Micromesistius poutassou, and Scomber scombrus) from the central Adriatic Sea were measured and the relationships between fish size (length and weight) and metal concentrations in the tissues were investigated. Samples were analyzed by inductively coupled plasma-atomic emission spectrophotometry with automatic dual viewing. In the muscle, results of linear regression analysis showed that, except for mercury, significant relationships between metal concentrations and fish size were negative. Only mercury levels were positively correlated with Atlantic mackerel size (p?<?0.05). No significant variations of heavy metal concentrations were observed in muscles of the examined species, but a significant difference (p?<?0.01) was found for As, Cd, Pb, and Se concentrations in bone. All the investigated metals showed higher values in the muscle than in bone, except for lead and zinc. Regarding cadmium, lead, and mercury maximum levels, set for the edible portion by European legislation, several samples exceeded these values, confirming the heavy metal presence in species caught near the Jabuka Pit.