Runoff and sediment losses from 27 upland catchments in Southeast Asia: Impact of rapid land use changes and conservation practices

Rapid changes in upland farming systems in Southeast Asia generated predominantly by increased population pressure and ‘market forces’ have resulted in widespread land degradation that has been well documented at the plot scale. Yet, the links between agricultural activities in the uplands and downstream off-site effects remain largely unknown because of the difficulties in transferring results from plots to a larger scale. Many authors have thus pointed out the need for long-term catchment studies. The objective of this paper is to summarize the results obtained by the Management of Soil Erosion Consortium (MSEC) over the last 5 years from 27 catchments in five countries (Indonesia, Laos, Philippines, Thailand, and Vietnam). The purpose of the study was to assess the impacts of cultivation practices on annual runoff and erosion rates. Initial surveys in each catchment included topography, soils and land use. Monitoring included climatic, hydrologic and erosion (total sediment yield including bed load and suspended sediment load) data, land use and crop yields, and farmers’ income. In addition, new land management options were introduced through consultations with farmers and evaluated in terms of runoff and erosion. These included tree plantations, fruit trees, improved fallow with legumes, maize intercropped with legumes, planted fodder, native grass strips and agro-ecological practices (direct sowing and mulch-based conservation agriculture). Regressions analyses showed that runoff during the rainy season, and normalized runoff flow coefficient based on erosive rainfall during the rainy season (rainfall with intensity exceeding 25 mm h⁻¹) increase with the percentage of the catchment covered by maize. Both variables decrease with increasing soil depth, standard deviation of catchment slope (that reflects terrain roughness), and the percentages of the catchment covered by fallow (regular and improved), tree plantations and planted fodder. The best predictors of sediment yield were the surface percentages of maize, Job's tears, cassava and footpaths. The main conclusions generated from this study were: (i) soil erosion is predominantly influenced by land use rather than environmental characteristics not only at the plot scale but also at the catchment scale; (ii) slash-and-burn shifting cultivation with sufficiently long rotations (1 year of cultivation, 8 years of fallow) is too often unjustly blamed for degradation; (iii) in its place, continuous cropping of maize and cassava promotes high rates of soil erosion at the catchment scale; (iv) conservation technologies are efficient in reducing runoff and total sediment yield at the catchment scale; (v) the adoption of improved soil management technologies by upland farmers is not a function of the degree of intensification of their farming system and/or of their incomes. The results suggest that if expansion of maize and cassava into already degraded upland systems were to occur due to increased demand for biofuels, there is a risk of higher runoff and sediment generation. A failure to adopt appropriate land use management strategies will result in further rapid resource degradation with negative impacts to downstream communities.     

Assessment of some water quality parameters in the Red River downstream,Vietnam by combining field monitoring and remote sensing method

Environmental Science and Pollution Research - The Red River is the largest river in northern Vietnam, and it serves as the main water source for production and human activities in the Red River...     

Utilization of a biosurfactant foam/nanoparticle mixture for treatment of oil pollutants in soil

Oil contamination has become a primary environmental concern due to increased exploration, production, and use. When oil enters the soil, it may attach or adsorb to soil particles and stay in the soil for an extended period, contaminating the soil and surrounding areas. Nanoparticles have been widely used for the treatment of organic pollutants in the soil. Surfactant foam has effectively been employed to remediate various soil contaminants or recover oil compounds. In this research, a mixture of biosurfactant foam/nanoparticle was utilized for remediation of oil-contaminated soil. The results demonstrated that the biosurfactant/nanoparticle mixture and nitrogen gas formed high-quality and stable foams. The foam stability depended on the foam quality, biosurfactant concentration, and nanoparticle dosage. The pressure gradient change in the soil column relied on the flowrate (N₂ gas + surfactant/nanoparticle mixture), foam quality, and biosurfactant concentration. The optimal conditions to obtain good quality and stable foams and high oil removal efficiency involved 1 vol% rhamnolipid, 1 wt% nanoparticle, and 1 mL/min flowrate. Biosurfactant foam/nanoparticle mixture was effectively used to remediate oil-contaminated soil, whereas the highest treatment efficiency was 67%, 59%, and 52% for rhamnolipid biosurfactant foam/nanoparticle, rhamnolipid biosurfactant/nanoparticle, and only rhamnolipid biosurfactant, respectively. The oil removal productivity decreased with the increase of flowrate due to the shorter contact time between the foam mixture and oil droplets. The breakthrough curves of oil pollutants in the soil column also suggested that the foam mixture’s maximum oil treatment efficiency was higher than biosurfactant/nanoparticle suspension and only biosurfactant.

     

Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001     

Improvement of prenatal diagnosis of wilson disease using microsatellite markers

This paper describes a case of prenatal diagnosis for Wilson disease (WD) carried out in an at-risk couple of Sardinian descent, following non-directive genetic counselling. Diagnosis was obtained by using eight microsatellites located within or flanking the WD locus, six of which were 100 per cent and two 50 per cent informative. The use of several markers may limit the occurrence of misdiagnosis resulting from recombination or instability of repeats.     

Rank aggregation of local expert knowledge for conservation planning of the critically endangered saola

There has been much recent interest in using local knowledge and expert opinion for conservation planning, particularly for hard‐to‐detect species. Although it is possible to ask for direct estimation of quantities such as population size, relative abundance is easier to estimate. However, an expert's knowledge is often geographically restricted relative to the area of interest. Combining (or aggregating) experts’ assessments of relative abundance is difficult when each expert only knows a part of the area of interest. We used Google's PageRank algorithm to aggregate ranked abundance scores elicited from local experts through a rapid rural‐appraisal method. We applied this technique to conservation planning for the saola (Pseudoryx nghetinhensis), a poorly known bovid. Near a priority landscape for the species, composed of 3 contiguous protected areas, we asked groups of local people to indicate relative abundances of saola and other species by placing beans on community maps. For each village, we used this information to rank areas within the knowledge area of that village for saola abundance. We used simulations to compare alternative methods to aggregate the rankings from the different villages. The best‐performing method was then used to produce a single map of relative abundance across the entire landscape, an area larger than that known to any one village. This map has informed prioritization of surveys and conservation action in the continued absence of direct information about the saola.     

Verification of a 3D CFD model for vertical slot fish-passes

In the present work, we verified a 3D computational fluid dynamics model for vertical slot fish-passes (VSFs) that employs the renormalization-group k-epsilon turbulence model (RNG KE) and the volume of fluid (VOF) method. We compared model calculations with experiments in two pool designs T1 and T2 of an experimental VSF and with 2D calculations using the shallow water equations (SWE) and the standard k-epsilon (2D SKE) model. Calculations of the 3D model showed (1) good agreement with experiments and 2D calculations in predicting mean flow velocities, (2) better performance in the determination of the water surface in the VSF, which is attributed to the accurate VOF method, (3) superior prediction of turbulence characteristics than the 2D model, which is due to the 3D RNG KE model that overcomes the problem of turbulence overestimation of the 2D SKE model, and to the fact that the 3D model takes into account the 3D features of the flow in the fish pass. Moreover, the present 3D calculations showed that the common assumptions in VSFs that (1) the flow is 2D, and (2) the simulation of 4 pools of a VSF is sufficient to obtain satisfactory results, are not always valid. Flow can be considered as 2D only in pool design T2 and for certain geometries and flow characteristics in pool design T1; while, eventually, all the pools of a fish pass need to be modeled to ensure accurate results. Finally, the present work illustrates the need to perform fish experiments simultaneously with flow experiments.     

Effects of arsenic on nitrate metabolism in arsenic hyperaccumulating and non-hyperaccumulating ferns

This study investigated the effects of arsenic on the in vitro activities of the enzymes (nitrate reductase and nitrite reductase) involved in nitrate metabolism in the roots, rhizomes, and fronds of four-month old Pteris vittata (arsenic – hyperaccumulator) and Pteris ensiformis (non-arsenic--hyperaccumulator) plants. The arsenic treatments (0, 150, and 300 μM as sodium arsenate) in hydroponics had adverse effects on the root and frond dry weights, and this effect was more evident in P. ensiformis than in P. vittata. Nitrate reductase and nitrite reductase activities of arsenate-treated plants were reduced more in P. ensiformis than in P. vittata. This effect was accompanied by similar decreases in tissue NO₃^? concentrations. Therefore, this decrease is interpreted as being indirect, i.e., the consequence of the reduced NO₃^? uptake and translocation in the plants. The study shows the difference in the tolerance level of the two Pteris species with varying sensitivity to arsenic.     

Concentrations of Heavy Metals in Muscle with Relation to the Growth of Two Marine Fish Species

Heavy metal concentrations in muscle and their relation to thegrowth of two marine fish species,including tonguefish( Cynoglossus arel) and mullet( Mugil cephalus),were studied. The samples were collected in Bach Dang estuary andconcentrations of heavy metals( As,Cd,Co,Mn,Cu,Zn,Pb,and V) in muscle of the fisheswere determined. The result showed that the accumulated trend of heavy metal is different between fish species. The concentration of As,Zn,Mn,V,Cu,Pb,Co and Cd in tonguefish were 73. 7 ± 30. 6,22. 82 ± 4.87,3. 44 ± 2. 13,1. 61 ± 0. 15,0. 71 ± 0. 13,0. 45 ± 0. 24,0. 03 ± 0. 02 and 0. 02 ± 0. 02 mg·g-1,respectively. Meanwhile the concentration of Zn,As,V,Mn,Cu,Pb,Co and Cd in mullet were 83. 41 ±19. 68,9. 78 ± 1. 92,1. 36 ± 0. 54,1. 29 ± 0. 51,0. 65 ± 0. 12,0. 42 ± 0. 20,0. 06 ± 0. 03 and0. 03 ± 0. 01mg·g-1,respectively. Comparison of metal levels among thesespecies indicated that the concentrations of As and Mn in tonguefish were significantly higher than those in mullet,whereas Zn levels in mullet were found to be higher than that in tonguefish. There is no significant differences of Cd,Co,Cu,Pb and V levels in muscle between two species. Significant inversed relationshipsbetween concentration levels of metals and lengths of tonguefish were found for Mn,Cu and Zn,butnot for As,Cd,Pb,and V. There were no significant relationships between the heavy metal concentrations and the length of mullet. In general,decreasesof the heavy metal concentrations corresponded to the increases of fish body lengths,particularly for As,Co,Cu,Mn and V and the exception for Cd. Terefore reduced risks were associated with consuming biggermullet fish,and increased risks of As and Cd were associated with consuming bigger tonguefish in Bach Dang river mouth.     

Sorption of selenium anionic species on apatites and iron oxides from aqueous solutions

The sorption of selenite and selenate ions from aqueous solutions was investigated on hydroxyapatite, fluorapatite, goethite and hematite, in order to simulate the behavior of radioactive selenium in natural or artificial sorbing media. Correlation studies with acido-basic properties and solubility of the solids were also performed. The sorption is pH dependant, but these solids are very efficient for retaining selenite at pH values generally encountered in natural waters, with however higher K(d) values for oxides than apatites. Selenate ions are much less sorbed than selenite. Several methods such as electron microscopy and spectroscopic techniques were used to identify the sorption mechanisms. In the case of hydroxyapatite, sorption proceeds by substitution of phosphate groups in the lattice of the apatite crystal in the superficial layers of the solid. In the case of goethite and hematite, sorption can be interpreted and modeled by a surface complexation process, but there is a discrepancy between sorption site densities for selenite and for protons.