Phthalic acid esters (PAEs) in workplace and house dust from Vietnam: concentrations,profiles, emission sources,and exposure risk

Environmental Science and Pollution Research - The occurrence of nine phthalic acid esters (PAEs) were determined in indoor dust samples collected from vehicle repair shops, waste processing...     

Spatial variability of sydney air quality by cumulative semivariogram

This paper establishes that an isotropic spatial correlation function in the form of a modified Bessel function of the second kind, first order, can be used to model the spatial variability of a pollution concentration field over a sufficiently long period of time in which the variability due to meteorological factors has been smoothed out. The corresponding cumulative semivariogram is derived and fitted by nonlinear least-squares to monthly averaged ozone data at 18 monitoring stations of the Sydney region. The good fit of the model indicates that the Sydney airshed has homogeneous and isotropic subregions whose radius of influence is about 17 km. The Bessel function form of the spatial correlation has a physical meaning as it is derived from the diffusion equation; hence, it is expected that the model can be used, in general, to represent the spatial variability of a smoothed homogeneous and isotropic concentration field.     

Regimes of human and climate impacts on coastal changes in Vietnam

Vietnam is a tropical to subtropical country located on the eastern Asian coast where the Red (Song Hong) and Mekong rivers discharge into the sea. The catchments of these two transboundary rivers cover parts of six countries, and their water and sediment discharges greatly influence the coastal seas of Vietnam. The impact of human activities include changes in the supply and distribution of water, sediments, and nutrients; changes in the relationships and balance among dynamically interacting factors and processes; and changes in the quality of the coastal and marine environments due to the increased use and accumulation of pollutants and the loss of habitats. These impacts have resulted in increasing unpredictability and severity of coastal problems such as floods, erosion, sedimentation, and saltwater intrusion; environmental pollution; and the degradation of ecosystems, with accompanying decrease in biodiversity and fishery productivity.     

Macroinfaunal structure and effects of thermal discharges in a mesohaline habitat of Chesapeake Bay,near a Nuclear Power Plant

The soft-bottom macroinfauna of the Chesapeake Bay near the Calvert Cliffs Nuclear Power Plant, Maryland, USA, was studied quarterly in 1977. A total of 42,900 organisms distributed among 55 taxa was taken in 180 Smith-McIntyre grabs. Two communities and an ecotone between these two communities were identified in association with three sediment types: sand, sand-clay, and clay. Reproductive activities of 8 numerically dominant species are described. The macroinfauna at Calvert Cliffs was largely seasonal; species richness and organism abundances were lowest in late summer. The polychaetes Scolecolepides viridis and Heteromastus filiformis and the bivalves Macoma balthica and Mya arenaria were dominant in March-June. In September-December, the polychaetes Neanthes succinea, Paraprionospio pinnata, and Glycinde solitaria and the bivalve Gemma gemma became dominant. There were clear indications of differences associated with sediment types in total number of species, total number of individuals, and abundances of the dominant species. The shallower and intermediate habitats had higher sand-clay ratios, lower organic carbon contents, and larger numbers of organisms than the deeper clay habitat. Within each depth, no apparent detrimental effects caused by the thermal discharges on total number of species, total number of individuals, abundances of the dominant species, species diversity or evenness were found. Increased abundance was observed at the discharge stations for a few species, especially for Mya arenaria and N. succinea.     

Assessment of occupational exposure to diesel fumes--parameter optimization of the thermal coulometric measurement method for carbon

'Elemental' carbon (EC) is used as a surrogate to assess occupational exposure to diesel soot. EC thermal analysis needs complete desorption of organic compounds from the soot particles prior to analysis in order to minimize positive interferences and artefacts. The desorption of the organic compounds can be considered as the major step which influences the reliability of the EC determination. A systematic study was carried out to investigate the different parameters of influence such as desorption temperature, desorption duration, heating rate and type of the sample on the desorption efficiency. It was found that temperature and duration are the major parameters of influence on the desorption efficiency. The influence of the sample load can be seen as a measure of the pyrolysis susceptibility of the sample. An optimized temperature program is proposed.     

草酸促进双酚A在黏土矿物悬浮液中光降解研究

选择两种常见的天然黏土矿物高岭石和蒙脱石,研究了有机污染物双酚A(BPA)在其表面的吸附及草酸对黏土矿物悬浮液中BPA光降解的影响.结果表明,BPA在两种黏土矿物表面的吸附量较小,吸附符合Langmuir等温式.在250W金属卤化物灯(λ≥360nm)照射下,草酸可显著促进BPA在高岭石和蒙脱石悬浮液中的光降解,降解动力学符合Langmuir-Hinshelwood方程. 降解速率受pH值的影响较大,pH=4.0时速度最快,光降解速率同时受草酸浓度的影响.最后,通过分析矿物中铁的化学环境及反应过程中铁浓度变化,分析了草酸促进BPA在黏土矿物悬浮液中光降解的可能机制.     

Antifungal efficiency assessment of the TiO2 coating on façade paints

The work studies the photocatalytic activity and the antifungal efficiency of the TiO₂/Zn-Al coatings placed on the target commercial façade paints. The photocatalytic active nanocomposite based on TiO₂ and Zn-Al-layered double hydroxides (ZnAl-LDHs) was synthesized by a wet impregnation technique with 3 % w/w TiO₂. The freshly prepared suspension was applied by spray technique on the surfaces of the white façade paints. The goal of the work was to develop a method that quickly quantifies the antifungal activity of the commercial façade paints with and without biocidal components covered with a photocatalytic coating. The essence of the proposed method is the monitoring of the fungal growth (artificial ageing conditions) and the quantification of its development (UV-A 0.13 mWcm^?2) on the façade paint surfaces. A special fungus nutrient (potato dextrose agar (PDA)) was inoculated with the spores of the Aspergillus niger ATCC 6275, and the test samples (façade paints with and without photocatalytic coating) were placed on the inoculated nutrient in the petri dishes. The images of the fungal growth on the samples of the facade paints, during a period of 5 days, were imported into Matlab R2012a where they were converted to binary images (BW), based on the adequate threshold. The percentage of the surface coverage was calculated by applying the specifically written program code which determines the ratio of the black and white pixels. The black pixels correspond to the surface covered with hyphae and mycelia of the fungus.     

Polybrominated diphenyl ethers in plastic products,indoor dust,sediment and fish from informal e-waste recycling sites in Vietnam: a comprehensive assessment of contamination,accumulation pattern,emissions, and human exposure

Residue concentrations of polybrominated diphenyl ethers (PBDEs) in different kinds of samples including consumer products, indoor dust, sediment and fish collected from two e-waste recycling sites, and some industrial, urban and suburban areas in Vietnam were determined to provide a comprehensive assessment of the contamination levels, accumulation pattern, emission potential and human exposure through dust ingestion and fish consumption. There was a large variation of PBDE levels in plastic parts of obsolete electronic equipment (from 1730 to 97,300 ng/g), which is a common result observed in consumer plastic products reported elsewhere. PBDE levels in indoor dust samples collected from e-waste recycling sites ranged from 250 to 8740 ng/g, which were markedly higher than those in industrial areas and household offices. Emission rate of PBDEs from plastic parts of disposed electronic equipment to dust was estimated to be in a range from 3.4 × 10^?7 to 1.2 × 10^?5 (year^?1) for total PBDEs and from 2.9 × 10^?7 to 7.2 × 10^?6 (year^?1) for BDE-209. Some fish species collected from ponds in e-waste recycling villages contained elevated levels of PBDEs, especially BDE-209, which were markedly higher than those in fish previously reported. Overall, levels and patterns of PBDE accumulation in different kinds of samples suggest significant emission from e-waste sites and that these areas are potential sources of PBDE contamination. Intakes of PBDEs via fish consumption were generally higher than those estimated through dust ingestion. Intake of BDE-99 and BDE-209 through dust ingestion contributes a large proportion due to higher concentrations in dust and fish. Body weight normalized daily intake through dust ingestion estimated for the e-waste recycling sites (0.10–3.46 ng/day/kg body wt.) were in a high range as compared to those reported in other countries. Our results highlight the potential releases of PBDEs from informal recycling activities and the high degree of human exposure and suggest the need for continuous investigations on environmental pollution and toxic impacts of e-waste-related hazardous chemicals.     

Emissions and distribution of methyl bromide in field beds applied at two rates and covered with two types of plastic mulches

A field experiment was conducted to compare two plastic mulches and two application rates on surface emissions and subsurface distribution of methyl bromide (MBr) in field beds in Florida. Within 30 minutes after injection of MBr to 30 cm depth, MBr had diffused upward to soil surface in all beds covered with polyethylene film (PE) or virtually impermeable film (VIF) and applied at a high rate (392 kg/ha) and a low rate (196 kg/ha). Due to the highly permeable nature of PE, within 30 minutes after injection, MBr volatilized from the bed surfaces of the two PE-covered beds into the atmosphere. The amount of volatilization was greater for the high rate-treatment bed. On the other hand, volatilization of MBr from the bed surfaces of the two VIF-covered beds were negligible. Volatilization losses occurred from the edges of all the beds covered with PE or VIF and were greater from the high rate-treatment beds. Initial vertical diffusion of MBr in the subsurface of the beds covered with PE or VIF was mainly upward, as large concentrations of MBr were detected from near bed surfaces to 20 cm depth in these beds 30 minutes after injection and little or no MBr was found at 40 cm depth. The two VIF-covered beds exhibited greater MBr concentrations and longer resident times in the root zone (0.5–40 cm depth) than corresponding PE-covered beds. Concentrations of MBr in the root zone of the high rate-treatment beds were 3.6–6.1 times larger than the low rate-treatment beds during the first days after application. In conclusion, VIF promoted retention of MBr in the root zone and, if volatilization loss from bed edges can be blocked, volatilization loss from VIF-covered beds should be negligible.     

Metal contamination of short-term snow cover near urban crossroads: correlation analysis of metal content and fine particles distribution

Snow samples were collected near crossroads in Novi Sad, Serbia, during December 2009 to assess metal concentrations (Ca, K, Zn, Fe, Cu, Mn, Al, Pb and Na), fine particle distribution and pH value. The filtered samples of melted snow were analysed, with a focus on particles smaller than a few μm. The most common values of the frequency number distribution curve were either in the range of 0.05-0.07 μm or one order of magnitude higher (0.2-0.5 μm). At examined locations metal concentrations varied from 0.0004 mg L⁻¹ for Pb to 18.9 mg L⁻¹ for Na. Besides Na, which mostly originated from de-icing salt, Ca is found to be the most abundant element in snow indicating the dominant influence of natural factors on snow chemistry. No significant difference was found in concentration of the elements at locations near crossroads with either low or high traffic volume, except for Na and Zn.To investigate how metals were related a correlation analysis was done for the concentrations of metals and with respect to the particle size distribution parameters and pH values. The major influence on the fine particle volume (mass) was concluded to be due to the elements from anthropogenic sources. This conclusion was based on the significant positive correlation between Fe, Zn and Al and the fine particle volume based distribution parameters.