Effects of Rainfall and Ground‐Water Pumping on Streamflow in Mākaha,O’ahu,Hawai’i1

Abstract: Land‐use/land‐cover changes in Mākaha valley have included the development of agriculture, residential dwellings, golf courses, potable water supply facilities, and the introduction of alien species. The impact of these changes on surface water and ground water resources in the valley is of concern. In this study, streamflow, rainfall, and ground‐water pumping data for the upper part of the Mākaha valley watershed were evaluated to identify corresponding trends and relationships. The results of this study indicate that streamflow declined during the ground‐water pumping period. Mean and median annual streamflow have declined by 42% (135 mm) and 56% (175 mm), respectively, and the mean number of dry stream days per year has increased from 8 to 125. Rainfall across the study area appears to have also declined though it is not clear whether the reduction in rainfall is responsible for all or part of the observed streamflow decline. Mean annual rainfall at one location in the study area declined by 14% (179 mm) and increased by 2% (48 mm) at a second location. Further study is needed to assess the effect of ground‐water pumping and to characterize the hydrologic cycle with respect to rainfall, infiltration, ground‐water recharge and flow in the study area, and stream base flow and storm flow.     

Estimating Hydraulic Properties of Volcanic Aquifers Using Constant‐Rate and Variable‐Rate Aquifer Tests1

Abstract: In recent years the ground‐water demand of the population of the island of Maui, Hawaii, has significantly increased. To ensure prudent management of the ground‐water resources, an improved understanding of ground‐water flow systems is needed. At present, large‐scale estimations of aquifer properties are lacking for Maui. Seven analytical methods using constant‐rate and variable‐rate withdrawals for single wells provide an estimate of hydraulic conductivity and transmissivity for 103 wells in central Maui. Methods based on constant‐rate tests, although not widely used on Maui, offer reasonable estimates. Step‐drawdown tests, which are more abundantly used than other tests, provide similar estimates as constant‐rate tests. A numerical model validates the suitability of analytical solutions for step‐drawdown tests and additionally provides an estimate of storage parameters. The results show that hydraulic conductivity is log‐normally distributed and that for dike‐free volcanic rocks it ranges over several orders of magnitude from 1 to 2,500 m/d. The arithmetic mean, geometric mean, and median values of hydraulic conductivity are respectively 520, 280, and 370 m/d for basalt and 80, 50, and 30 m/d for sediment. A geostatistical approach using ordinary kriging yields a prediction of hydraulic conductivity on a larger scale. Overall, the results are in agreement with values published for other Hawaiian islands.     

Disruption of biofilms from sewage pipes under physical and chemical conditioning

Biofilms grown inside two sewage collecting pipes located in industrial and residential areas are studied. Bacterial biomass inside three layers of biofilms was evaluated. Biofilm cohesion under different mixing rate and ionic strength was also investigated. Effects of physical and chemical parameters in the biofilms were evaluated by monitoring turbidity, chemical and biochemical oxygen demands. Extracted organic matter from biofilms was partitioned to polar, aromatic and saturated fractions using activated silica column chromatography. Results revealed that bacterial biomass growth depending on biofilm thickness and stratification. The most loaded stratum in bacterial biomass was the sewage-biofilm interface stratum that represented 51% of the total bacterial biomass. Stirring rate and ionic strength of mono and bivalent salts showed a major influence in biofilm disruption. The stirring time enhanced the exchange dynamic and matter capture between biofilm fragments at the critical stirring rate 90 r/min. Sodium chloride showed the dispersing effect on biofilms in suspension, and decreased the BOD5 (biochemical oxygen demand) beyond the physiological salt concentration.     

Concentration of polychlorinated biphenyls and organochlorine pesticides in mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax) from Bizerte Lagoon (Northern Tunisia)

Concentrations of polychlorinated biphenyls (PCBs), and organochlorine pesticides (OCPs) were determined in two fish species, mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax), collected from Bizerte Lagoon and the Mediterranean Sea. In all samples, PCBs were found in higher concentrations than OCPs. The highest concentrations of OCPs and PCBs were found in sea bass, and in Bizerte Lagoon. Concentrations of DDTs and PCBs detected in this study were generally comparable or slightly higher than those found in studies from other Mediterranean and non-Mediterranean regions subject to a high anthropogenic impact. ∑PCBs, ∑HCHs and HCB levels were negatively correlated with lipid content, while no such correlation was seen for ∑DDTs. A significant correlation between levels and length and between levels and weight existed only for ∑PCBs. The daily intake of PCBs and OCPs ingested by people living in Bizerte through the studied fish species was estimated and compared with those observed in other areas.     

EDTA-enhanced phytoremediation of lead-contaminated soil by the halophyte Sesuvium portulacastrum

The low bioavailability of Pb and low number of Pb-tolerant plant species represent an important limitation for Pb phytoextraction. It was recently suggested that halophyte plant species may be a promising material for this purpose, especially in polluted salt areas while Pb mobility may be improved by synthetic chelating agents. This study aims to evaluate Pb extraction by the halophyte Sesuvium portulacastrum in relation to the impact of EDTA application. Seedling were cultivated during 60 days on Pb artificially contaminated soil (200, 400, and 800 ppm Pb) in the presence or in the absence of EDTA (3 g kg^?1 soil). Results showed that upon to 400 ppm, Pb had no impact on plant growth. However, exogenous Pb induce a decrease in shoot K⁺ while it increased shoot Mg²⁺ and had no impact on shoot Ca²⁺ concentrations. Lead concentration in the shoots increased with increasing external Pb doses reaching 1,390 ppm in the presence of 800 ppm lead in soil. EDTA addition had no effect on plant growth but strongly increased Pb accumulation in the shoot which increased from 1,390 ppm in the absence of EDTA to 3,772 ppm in EDTA-amended plants exposed to 800 ppm exogenous Pb. Both Pb absorption and translocation from roots to shoots were significantly enhanced by EDTA application, leading to an increase in the total amounts of extracted Pb per plant. These data suggest that S. portulacastrum is very promising species for decontamination of Pb²⁺-contaminated soil and that its phytoextraction potential was significantly enhanced by addition of EDTA to the polluted soil.     

Sequential photochemical-biological degradation of chlorophenols

UV/TiO₂/H₂O₂, UV/TiO₂ and UV/H₂O₂ were compared as pre-treatment processes for the detoxification of mixtures of 4-chlorophenol (4CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) prior to their biological treatment. When each chlorophenol was initially supplied at 50 mg l⁻¹, UV/TiO₂/H₂O₂ treatment supported the highest pollutant removal, COD removal, and dechlorination efficiencies followed by UV/TiO₂ and UV/H₂O₂. The remaining toxicity to Lipedium sativum was similar after all pre-treatments. Chlorophenol photodegradation was always well described by a first order model kinetic (r² > 0.94) and the shortest 4CP, DCP, TCP and PCP half-lives of 8.7, 7.1, 4.5 and 3.3 h, respectively, were achieved during UV/TiO₂/H₂O₂ treatment. No pollutant removal was observed in the controls conducted with H₂O₂ or TiO₂ only. Inoculation of all the photochemically pre-treated mixtures with activated sludge microflora was followed by complete removal of the remaining pollutants. Combined UV/TiO₂/H₂O₂-biological supported the highest detoxification, dechlorination (99%) and COD removal (88%) efficiencies. Similar results were achieved when each chlorophenol was supplied at 100 mg l⁻¹. COD and Cl mass balances indicated UV, UV/H₂O₂, and UV/TiO₂ treatments lead to the formation of recalcitrant photoproducts, some of which were chlorinated.     

n-Hexane Biodegradation in Trickle Bed Air Biofilters

While hydrophilic compounds are degraded easily in Trickling bed air biofilters (TBABs), hydrophobic compounds are retarded until biological cultures produce a sufficient RNA or enzyme/protein to utilize this compound. Hydrophobic compounds are not readily bio-available which makes them reluctant to biodegradation as mass transfer between the gas and liquid phases is a rate limiting step. To enhance the destruction of hydrophobic compounds in TBABs, the utilization of surfactant was introduced to increase the solubility which helps overcoming the rate limiting step. The surfactant was used as well to limit the growth of excess biomass ensuring smooth flow through the biofilter bed and preventing short circuits. Two different non-ionic non-toxic surfactants were used in this study: Triton X-100 and Tomadol® 25-7. Two lab-scale controlled TBABs were operated for investigating the performance difference for n-Hexane as an example of hydrophobic volatile organic compound (VOC) with and without the addition of surfactant. Operating conditions in both TBABs were as follows: nutrient feed rate (2L/day), air flowrate (1.4L/min), bed depth (60cm), empty bed retention time (120s), bed material (diatomaceous earth pellets) and room-temperature. The inlet concentration was changed from 50 to 100ppmv. Acclimation period, removal profile along biofilter depth, nitrogen consumption, and CO₂ production were compared under continuous loading operation condition. The optimum concentration of surfactant in the nutrient feed was determined by a batch experiment. The effect of different surfactant concentrations on VOC water solubility with time was studied by considering different VOC concentration sets within the TBAB loading rate range.     

Exploring the link between energy based taxes and economic growth

Environmental Economics and Policy Studies - This paper provides empirical evidence regarding the effect of energy based taxes on economic growth. The analysis is based on a panel dataset of 31...     

Synthesis of Chitosan@activated Carbon Beads with Abundant Amino Groups for Capture of Cu(II) and Cd(II) from Aqueous Solutions

In this study, chitosan and bio-based activated carbon obtained from sugarcane bagasse biowaste were used for the synthesis of efficient sorbent for Cu(II) and Cd(II) ion via precipitation method. The prepared material was enriched with amino groups through grafting tetraethylenepentamine and tested for heavy metal remediation from water samples. The influence of pH was investigated showing optimum sorption at pH 6 for Cu(II) and Cd(II). Sorption tests, explained by means of the most common sorption models, evidenced that the best performances were reached pointing out the promising application of the prepared sorbent for water purification treatments: Uptake kinetics are relatively fast: the equilibrium was reached within 140 min; and the kinetic profiles were preferentially fitted by the pseudo-second order rate equation. Sorption isotherms are fitted by Langmuir equation. The sorbent showed high metal ion sorption capacity with negligible influence of ion strength. The maximum sorption capacities reached 3.44 and 2.38 mmol g^??1 for Cu(II) and Cd(II), respectively at 298 K. Thermodynamic parameters were evaluated through variation of temperature. The sorption is unfavorable at elevated temperatures. Metal ions were successfully desorbed using 1 M HNO₃ solution.     

Risk assessment and remediation suggestion of impacted soil by produced water associated with oil production

Produced water is water trapped in underground formations that is brought to the surface along with oil or gas production. Oilfield impacted soil is the most common environmental problem associated with oil production. The produced water associated with oil-production contaminates the soil and causes the outright death of plants, and the subsequent erosion of topsoil. Also, impacted soil serves to contaminate surface waters and shallow aquifers. This paper is intended to provide an approach for full characterization of contaminated soil by produced water, by means of analysis of both the produced water and the impacted soil using several recommended analytical techniques and then identify and assay the main constituents that cause contamination of the soil. Gialo-59 oilfield (29N, 21E), Libya, has been chosen as the case study of this work. The field has a long history of petroleum production since 1959, where about 300,000 bbl of produced water be discharged into open pit. Test samples of contaminated soil were collected from one of the disposal pits. Samples of produced water were collected from different points throughout the oil production process, and the analyses were carried out at the labs of Libyan Petroleum Institute, Tripoli, Libya. The results are compared with the local environmental limiting constituents in order to prepare for a plan of soil remediation. The results showed that the main constituents (pollutants) that impact the soil are salts and hydrocarbon compounds. Accordingly; an action of soil remediation has been proposed to remove the salts and degradation of hydrocarbons.