Construction of vesicle CdSe nano-semiconductors photocatalysts with improved photocatalytic activity: Enhanced photo induced carriers separation efficiency and mechanism insight

Visible-light-driven photocatalysis as a green technology has attracted a lot of attention due to its potential applications in environmental remediation. Vesicle Cd Se nano-semiconductor photocatalyst are successfully prepared by a gas template method and characterized by a variety of methods. The vesicle Cd Se nano-semiconductors display enhanced photocatalytic performance for the degradation of tetracycline hydrochloride, the photodegradation rate of78.824% was achieved by vesicle Cd Se, which exhibited an increase of 31.779% compared to granular Cd Se. Such an exceptional photocatalytic capability can be attributed to the unique structure of the vesicle Cd Se nano-semiconductor with enhanced light absorption ability and excellent carrier transport capability. Meanwhile, the large surface area of the vesicle Cd Se nano-semiconductor can increase the contact probability between catalyst and target and provide more surface-active centers. The photocatalytic mechanisms are analyzed by active species quenching. It indicates that h+and UO_2~-are the main active species which play a major role in catalyzing environmental toxic pollutants. Simultaneously, the vesicle Cd Se nano-semiconductor had high efficiency and stability.     

In-situ synthesis of TiO2 rutile/anatase heterostructure by DC magnetron sputtering at room temperature and thickness effect of outermost rutile layer on photocatalysis

TiO_2 rutile/anatase heterostructure thin films with varying rutile thickness have been in-situ synthesized via DC magnetron sputtering with Ar gas at room temperature. The crystal texture, surface morphology, energy gap and optical properties of the films have been investigated by X-ray diffraction meter, grazing incidence X-ray diffraction meter, Raman spectroscopy, scanning electron microscopy, and UV–visible spectrophotometer, which indicates that the rutile/anatase heterostructure films are successfully fabricated. The further degradation experiments display that the photocatalytic activity can be dramatically affected by the thickness of the outmost rutile layer and the 100 nm thickness exhibits the best performance in all of the TiO_2 thin films. With the increase of the outmost rutile layer, the optical band gap of TiO_2 film displays a systematic decrease slightly. However,the change in photocatalytic activity does not coincide with that in the band gap. The photoresponse and electrochemical properties of the thin films have been characterized to understand the mechanism of the varied photocatalytic activity.     

Pd-MnO2 nanoparticles/TiO2 nanotube arrays (NTAs) photo-electrodes photo-catalytic properties and their ability of degrading Rhodamine B under visible light

Pd-MnO_2/TiO_2 nanotube arrays(NTAs) photo-electrodes were successfully fabricated via anodization and electro deposition subsequently; the obtained Pd-MnO_2/TiO_2 NTAs photo electrodes were analyzed by scanning electron microscopy(SEM), X-ray diffraction(XRD) and characterized accordingly. Moreover, the light harvesting and absorption properties were investigated via ultraviolet–visible diffuse reflectance spectrum(DRS); photo degradation efficiency was investigated via analyzing the photo catalytic degradation of Rhodamine B under visible illumination(xenon light). The performed analyses illustrated that Pd-MnO_2 codoped particles were successfully deposited onto the surface of the TiO_2 nanotube arrays;DRS results showed significant improvement in visible light absorption which was between400 and 700 nm. Finally, the photo catalytic degradation efficiency results of the designated organic pollutant(Rhodamine B) illustrated a superior photocatalytic(PC) efficiency of approximately 95% compared to the bare TiO_2 NTAs, which only exhibited a photo catalytic degradation efficiency of approximately 61%, thus it indicated the significant enhancement of the light absorption properties of fabricated photo electrodes and their yield of UOH radicals.     

海洋功能区划保留区管控要求解析及政策建议

本文基于保留区选划的原因和分类,结合新一轮全国和省级海洋功能区划编制,汇总和比较全国、省级保留区管控规定,分析了目前各省保留区个数、面积、岸线长度、离岸距离等设置情况。据此,依据保留区内涵将保留区划分为五类,即功能待定区、发展预留区、整治修复预留区、保护缓冲区以及特殊功能预留区,分别提出五类保留区的使用管理要求和环境保护要求。最后,文章从保留区用海现状处理方式、开发利用条件、用海活动管理等方面提出政策建议。总体来说,保留区不允许随意利用但并不完全禁止利用,在不改变海域自然属性的前提下,当用海活动符合保留区用途及环境保护要求,不影响周边海域功能正常发挥的情况下允许进行开发利用。     

后处理设施给水系统可靠性的GO法研究

后处理设施给水系统是后处理设施重要的公用系统,对后处理设施的稳定、安全运行至关重要.给水系统的可靠性需要深入分析,应用GO法进行了研究.获得了给水系统的平均故障概率、最小割集、重要度等可靠性指标.结果表明,给水系统的可靠性比较高,符合单一故障准则,二阶最小割集对系统故障的贡献最大,应该采取措施予以消除.进一步深入对比分析GO法与故障树法,结果显示,对于给水系统的可靠性分析,GO法有建模容易且图形简洁的优点.     

野外环境生长的薰衣草精油抑菌作用测定方法比较研究

采用滤纸片法和混合法对野外环境生长的薰衣草精油的抑菌作用进行了研究,并对两种试验方法进行了比较,测定了最小抑菌浓度(MIC)与最小杀菌浓度(MBC),以期充分发挥薰衣草精油的抑菌作用.滤纸片法结果表明:薰衣草精油对多数实验菌都有抑菌作用,对枯草杆菌则未表现出抑制作用;混合法实验显示:薰衣草精油对实验菌均有抑菌作用,精油浓度与抑菌作用成线性相关,抑菌作用较滤纸片法效果更好.在使用时,可用于表面喷涂、熏蒸,还可将精油作为安全的食品添加剂,提高食品的保鲜效果,保证其品质.     

因子分析在黄河上游干流地区滑坡灾害中的应用

黄河上游地区干流滑坡灾害频繁发生,造成了严重的经济损失和人员伤亡。对该区滑坡灾害进行研究,对于指导该区的抗灾、减灾和预防工作意义重大。采用遥感技术和野外采样实测,获取了研究区的129处滑坡灾害数据,进而对滑坡灾害影响因素进行了因子分析。通过因子分析,得到公因子,并对公因子命名。在此基础上,计算了因子得分及综合得分,并对其进行了排序。研究结果表明:灾害数据变量之间有较强的相关性,滑坡发生主要受到滑体标高因子、滑体外形因子、地表因子、环境因子和滑体性质5个公共因子的影响。滑体标高、环境特征和滑体性质对滑坡的影响较大,滑体外形因素和地表因素对滑坡发生的影响相对较小。     

氮氟掺杂二氧化钛(N,F-TiO2)的制备及可见光催化活性的研究

以氨水为氮源,氢氟酸为氟源,采用溶胶-凝胶法制备了氮氟掺杂二氧化钛(N,F-TiO2)光催化剂,并通过X-射线衍射(XRD)和扫描电镜(SEM)技术对其晶型和形态进行表征.最后以酸性红B为模型污染物,探讨了N和F加入量、焙烧温度、焙烧时间、照射时间、催化剂用量、溶液初始浓度和照射功率等因素对N,F-TiO2可见光催化活性的影响.结果表明,制备的N,F-TiO2以锐钛型为主,N和F的掺杂对TiO2的晶相没有明显改变,但可以扩大TiO2的可见光响应范围.当N和F的加入量均为2.0%,且在500℃下焙烧40 min时,得到的N,F-TiO2的可见光催化活性明显高于单N或单F掺杂的TiO2(N-TiO2或F-TiO2).对于50 mL浓度为10.0 mg·L-1的酸性红B溶液,当催化剂加入量为1.5 g·L-1,128W光照3.0 h,溶液pH=5.6时,去除率为85.40%.适当延长光照时间至4.0 h,降解率几乎可达100%.另外,研究还证明了N,F-TiO2催化可见光降解过程中有.OH自由基生成.     

地质雷达在监测地下水石油烃污染中的应用

随着我国工业迅速发展,石油烃污染威胁地下水安全问题逐渐暴露出来。地质雷达作为一种非破坏性的原位探测技术在国外已广泛应用于地下水监测,由于石油烃在地质雷达图谱上通常显示出高阻异常特征,这为探测地下水中的石油烃污染提供了可能。简述了地质雷达探测石油烃的原理,探测效果的影响因素,并列举了部分国外实例,证实了地质雷达探测地下水石油烃污染的可行性。     

Research on the evolvement of morphology of coking coal during the coking process

The evolvement of morphology and structure of the coal with different metamorphic degrees during coking process in the vertical furnace was investigated by infrared Image detector. Moreover, the temperature distribution in the radial direction and the crack formation were also studied in heating process. The results show that the amount of crack and the shrinkage level of char decrease with the coal rank rising. In addition, the initial temperature of crack formation for char increases with the coal rank rising.