方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.     

医疗废物焚烧残余物固化技术初探

根据对医疗废物焚烧残余物中有毒有害物质的化验分析结果,确定焚烧残余物中有毒有害成分含量仍较高,部分指标超出标准值,必须对其进行稳定化/固化处理,避免对土壤及地下水环境造成污染.本文阐述了稳定化/固化处理原理及处理工艺,使医疗废物无害化、减量化和资源化的处理原则得以全面实现.     

地震灾害与地震预报——写在邢台地震40周年之际

本文分析了我国的地震灾害，阐述了近代地震灾害的特点和发展趋势，指出地震预报既是强烈的社会需求，也是全球性的科学难题，最后较为全面地介绍了我国地震预报的主要进展。     

On-line optical determination of floc size of Fe(Ⅲ) coagulants

This study investigated the floc aggregation, average floc size, floc size variance and floc growth velocity when ferric chloride （FeCl3） and polyferric chloride （PFC） were used to treat the simulated water samples. The factors including coagulant dose, ionic strength and solution pH, which affect the floc aggregation, were studied. Experiments were carried out in a bench-scale reactor using photometric dispersion analyzer （ PDA）. Results showed that there were great differences between the floc aggregation of PFC and FeCl3. The average floc size and fioc growth velocity of PFC were much larger than those of FeCl3. Compared with FeCl3, PFC gave a better coagulation performance in wider range of pH, dosage and ionic strength. It was also found that the coagulation efficiency of PFC did not depend on average floc size but on floc growth velocity.     

防止井下作业污染环境的工艺技术应用

分析了井下作业施工对环境造成污染的因素，介绍江苏油田在井下作业过程中进行污染防治的措施及其相关配套新工艺、新技术的应用和效果。     

石化企业的节水与废水资源化问题

讨论了石化企业如何充分利用水资源，不断提高节水意识。并结合石化企业的具体情况，用系统工程的分析方法，深入研究节水和水资源化的方法和途径。对这些问题，提出一些看法供大家参考。     

复合催化氧化技术对油气田压裂返排液的处理研究

酸化压裂作业废水是石油天然气生产过程中的主要污染源,它的污染成份复杂,有害物质浓度高,特别是含有胍胶和表面活性剂等高分子物质,具有高COD、高稳定度、高粘度的特点.本文通过对压裂液的来源、水质特征、治理现状等常用方法的分析,确定了物理化学脱稳,过滤、O3/H2O2复合催化氧化、深度氧化的达标治理工艺路线.经过处理后的压裂液澄清透明,达到国家二级排放标准(GB8978-96).     

建筑行业环境保护与绿色施工

本文对建筑施工造成的环境污染及其危害性进行了分析,提出切实可行的文明施工、防止污染、新科技环保等综合措施,坚持可持续发展的科学发展观,发展文明施工、绿色施工.     

水体中苯及其衍生物降解途径研究进展

介绍了苯及其衍生物对水环境所造成的污染和危害,并对水体中该类污染物降解技术研究进展进行了综述.着重介绍了光化学及光催化技术、生物降解和超声波降解等技术在该领域的有关研究.     

Membrane fouling control by ultrasound in an anaerobic membrane bioreactor

In this study, ultrasound was used to control the membrane fouling online in an anaerobic membrane bioreactor (AMBR). Short-term running experiments were carried out under different operating conditions to explore feasible ultrasonic parameters. The experimental results indicated that when the crossflow velocity was more than 1.0 m/s, membrane fouling could be controlled effectively only by hydrodynamic methods without ultrasound. When ultrasound was applied, an ultrasonic power range of 60–150 W was suitable for the membrane fouling control in the experimental system. The experimental results showed that the membrane fouling was controlled so well that membrane filtration resistance (ΣR) could stay at 5 × 10¹¹ m⁻¹ for more than a week with the crossflow velocity of 0.75 m/s, which equaled the effect of crossflow velocity of more than 1.0 m/s without ultrasound. Translated from Techniques and Equipment for Environmental Pollution Control, 2006, 7(4): 25–29 [译自: 环境污染治理技术与设备]