Adsorption of chloridazon from aqueous solution on modified kerolite-rich materials

The adsorption of chloridazon (5-amine-4-chloro-2-phenylpyridazin-3(2H)-one) on kerolite samples heated at 110 degrees C (K-110), 200 degrees C (K-200), 400 degrees C (K-400), 600 degrees C (K-600) and acid-treated with H(2)SO(4) solutions of two different concentrations (0.25 and 0.5 M) (K-0.25 and K-0.5, respectively) from pure water at 25 degrees C has been studied by using batch and column experiments. The adsorption experimental data points were fitted to the Freundlich equation in order to calculate the adsorption capacities (K(f)) of the samples; K(f) values ranged from 184.7 mg kg(-1) (K-0.5) up to 2253 mg kg(-1) (K-600). This indicated that the heat treatment given to the kerolite greatly increases its adsorption capacity for the herbicide whereas the acid treatment produces a clear decrease in the amount of chloridazon adsorbed. The removal efficiency (R) was also calculated; R values ranging from 52.8% (K-0.5) up to 88.3% (K-600). Thus, the results showed that the 600 degrees C heat-treated kerolite was more effective in relation to adsorption of chloridazon and it might be reasonably used in removing this herbicide from water.     

Hepatic monooxygenase (CYP1A and CYP3A) and UDPGT enzymatic activities as biomarkers for long-term carbofuran exposure in tench (Tinca tinca L)

The effect of a long-term exposure of tenchs to different concentrations (10 and 100 micro g/L) of the pesticide carbofuran has been evaluated. Microsomal hepatic cytochrome P450 subfamily 1A (CYP1A) and 3A (CYP3A) activities, as well as the phase II enzyme uridine diphospho-glucuronosyltransferase (UDPGT) activity were evaluated as adequate biomarkers of fish exposure to environmentally relevant concentrations of the pesticide carbofuran in freshwater ecosystems. A clear time-dependent inhibition of both CYP1A and UDPGT activities was observed in fish exposed to the highest dose of carbofuran with respect to controls, whereas in the case of CYP3A activity, values of exposed animals did not show a clear pattern of alteration during the experiment. The results of the present study demonstrated that hepatic CYP1A and UDPGT activities from tench could be considered as sensitive biomarkers for carbamate pesticides in polluted water, thus allowing future and ecologically relevant biomonitoring studies with this species.     

Urbanisation and flood vulnerability in the peri-urban interface of Mexico City

Chronic flooding in the Chalco valley, state of Mexico, Mexico, is the outcome of past and present socio‐environmental changes which have taken place in Mexico City's south‐eastern peri‐urban interface. This flooding is the result of a complex interaction between urbanisation in an ex‐lacustrine area, permanent ecological deterioration and ground subsidence, poor sanitation and inadequate policy responses. Far from solving the flooding problem, short‐term policy responses have created increasingly unsafe conditions for current residents. A socio‐historical analysis of disasters reveals the importance of taking into consideration particular social actors and institutions in hazard generation and flood vulnerability over time. This paper analyses three aspects of this flooding: first, the importance of approaching floods from a socio‐historical perspective; second, the relation between urbanisation, former policies and flood risk generation; and third, current policy responses to and the failure in the risk management of La Compañía Canal.     

New metallothionein assay in Scrobicularia plana: heating effect and correlation with other biomarkers

Metallothionein (MT) and other biomarker levels were measured in Scrobicularia plana clams to assess pollution of the Guadalquivir Estuary possibly affected by metals released from Aznalcóllar pyrite mine in 1998. After optimizing reagent concentrations for monobromobimane derivatization, MT levels were quantified by reversed-phase high-performance liquid chromatography coupled to fluorescence detection (RP-HPLC-FD) in heated or unheated digestive gland extracts and compared to those obtained by differential pulse polarography (DPP). MT content assayed by RP-HPLC-FD in unheated samples was higher than that obtained by DPP and correlated better with metals and anti-oxidant activities. MT assay by RP-HPLC-FD in unheated extracts would be preferable for assessing metal pollution, due to its greater sensitivity and specificity. In addition to MT induction, glyoxalase II inhibition was well correlated with metal contents. Our results suggest that metals at the estuary do not originate from Aznalcóllar spill, but from those carried along by the river and deposited at its concave bank.     

Preparation of a porous clay heterostructure and study of its adsorption capacity of phenol and chlorinated phenols from aqueous solutions.

A porous clay heterostructure (PCH) from a Mexican clay was prepared and characterized, and its aqueous phenol and dichlorophenols (DCPs) adsorption capacities were studied using a batch equilibrium technique. The PCH displayed a surface area of 305.5 m2/g, 37.2 A average porous diameter, and a basal space of 23.2 A. The adsorption capacity shown by the PCH for both phenol and DCPs from water (14.5 mg/g for phenol; 48.7 mg/g for 3,4-DCP; and 45.5 mg/g for 2,5-DCP) suggests that the PCH has both hydrophobic and hydrophilic characteristics, as a result of the presence of silanol and siloxane groups formed during the pillaring and calcination of the PCH. The values of maximal adsorption capacity for dichlorophenols were higher than those reported for aluminum pillared clays and some inorgano-organo clays and comparable with some ionic exchange resins.     

Treatment of chromium plating process effluents with ion exchange resins.

The surface treatment industry deals with various heavy metals, including the elements Cr, Zn, Ni, Cd, and Cu. Conventional treatments of effluents generate class I solid residue. The aim of this investigation was to study the viability of ion exchange as an alternative process for treatment of rinse water and to determine the efficacy of two ion exchange systems, System 1: "strong" cationic resin-"strong" anionic resin and System 2: "strong" cationic resin-"weak" anionic resin. Commercial resins and solutions taken from rinse tanks of chromium plating companies were used in this investigation. A two-column system, one for the cationic resin and another for the anionic resin, both with 150 ml capacity was mounted. The solution was percolated at a rate of 10 ml/min. The following solutions were used for regeneration of the resins: 2% H2SO4 for the cationic and 4% NaOH for the anionic. The percolated solutions revealed chromium contents of less than 0.25 mg/l, independent of the system used. The "strong" cationic resin-"weak" anionic resin gave excellent regeneration results. The "strong" cationic-"strong" anionic resin presented problems during regeneration, and did not release the retained ions after percolation of 2000 ml of 4% NaOH solution. It is concluded that for this type of treatment, the system composed of "strong" cationic resin and "weak" anionic resin is more appropriate.     

Comparison of Soil Extraction Isotherms of Soil Samples Saturated With Nonpolar Liquids

In multiphase systems capillary pressures play a significant role on fluid movement and retention. The facility to predict the effect of different thermal remediation strategies requires the knowledge of the effect of temperature on capillary pressure-saturation relationships in the soils. The objective of recent study was (a) to develop a technique for routinely measuring the pressure-saturation curves of soil samples saturated with a nonpolar liquid at different regulated temperatures (b) to build a database using the measured pressure-saturation curves and the physical, chemical properties of the model soils (c) to establish the dependence of nonaqueous phase liquid retention on the soil properties and the temperature. The retention curves (extraction isotherms) with nonaqueous phase liquid were determined using a modified pressure plate extractor. The wetting phase was a non-aromatic hydrocarbon distillation product. Pressure plates were designed and constructed in the laboratory of our department. The temperature was held constant at 20, 40 and 60 ^∘C. Statistical analysis was performed involving selected soil parameters and the measured nonaqueous phase liquid retention data. The results show that knowing some easily measurable soil parameters (bulk density, particle size distribution, humus and lime content) we can estimate the nonaqueous phase liquid retention of the soils. The measured “extraction isotherms” provide essential information about the temperature-dependency of pressure-saturation curves.     

Removal of emerging pollutant dibutylhydroxytoluene from water with CNT/TiO2 catalysts in a visible LED photoreactor

Environmental Science and Pollution Research - For the photocatalytic degradation of antioxidant 2,6-di-tert-butyl-hydroxytoluene (BHT), several TiO2-based composites have been prepared in MWCNT...