La3+掺杂对吸附相反应制备TiO2复合催化剂的结晶过程及弱紫外光下活性的影响

利用吸附相反应技术制备弱紫外光响应的高效催化剂,并通过XRD、XPS以及HRTEM探索了不同焙烧温度下La3+掺杂量对TiO2结晶过程的影响.结合弱紫外光下甲基橙的降解反应,深入研究催化剂结晶过程的变化对弱紫外光下催化剂活性的影响.结果表明,La3+掺杂会抑制TiO2的结晶过程.当焙烧温度或者掺杂量较低时,La3+不能进入TiO2的晶格结构但会轻微地抑制TiO2的结晶过程;未进入晶格结构的La3+存在会引入光生载流子的浅能级捕获中心,在弱光体系中极大提升了催化剂的活性.当La3+的掺杂量为0.05%(原子分数)时,经过900℃焙烧后催化剂降解能力最高,其活性超过商用P25的2倍多.在较高La3+掺杂量(超过0.20%)时,900℃焙烧后一定量La3+进入TiO2的晶格结构而大大抑制了TiO2结晶;这种强烈的抑制作用使得催化剂中存在大量无定形结构TiO2,无定形TiO2甚至多于700℃焙烧后的催化剂,反而大大抑制了弱光体系中催化剂活性.     

短程硝化颗粒污泥的快速培养与硝化特性研究

以城市污水处理厂剩余污泥为种泥,以2 min沉淀时间为选择压,在序批式反应器(SBR)中快速培养出好氧颗粒污泥。经过60个周期(20 d),反应器内出现砂粒状颗粒,并持续稳定运行120 d。成熟的颗粒污泥平均粒径856.56μm,具有良好的硝化性能。SBR反应器以固定曝气时间方式运行,亚硝酸盐积累率达80%以上,实现了稳定短程硝化。试验结果表明:絮体污泥(即接种污泥)与颗粒污泥的硝化过程相似但略有差异。二者差别在于,氨氮氧化结束后,继续曝气120 min,絮体污泥将亚硝酸盐完全转化为硝酸盐,而颗粒污泥仅将部分亚硝酸盐转化且过程比较缓慢。     

景观用再生水氮磷条件下两种典型水华藻类的生长及竞争规律

针对再生水景观水体的藻类控制,以BG11培养基为基础,设定不同氮磷浓度,对铜绿微囊藻和小球藻进行了纯培养和共培养实验。实验结果表明:初始总氮浓度为15 mg/L、总磷浓度为0.1 mg/L时两种藻就能出现明显的生长高峰;当总氮浓度为3⁴5 mg/L,氮磷比为3045 mg/L,氮磷比为30¹50的情况下,小球藻在与铜绿微囊藻的竞争中容易成为优势藻种。     

Research on the evolvement of morphology of coking coal during the coking process

The evolvement of morphology and structure of the coal with different metamorphic degrees during coking process in the vertical furnace was investigated by infrared Image detector. Moreover, the temperature distribution in the radial direction and the crack formation were also studied in heating process. The results show that the amount of crack and the shrinkage level of char decrease with the coal rank rising. In addition, the initial temperature of crack formation for char increases with the coal rank rising.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultraviolet-visible spectrophotometer within a range of 199–700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596°C.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultravioletvisible spectrophotometer within a range of 199-700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596℃.     

日本沼虾与秀丽白虾的营养生态位

为科学评估虾类的营养关系及资源的保护,利用稳定同位素技术研究了2种淡水虾类在大型通江湖泊——洞庭湖和鄱阳湖中的营养生态位和生态宽幅大小.结果表明,日本沼虾与秀丽白虾的δ13C值呈显著差异,而δ15N值无明显差异.同时,由于营养状况及水文的差异,虾类同位素值的差异在2个湖泊中表现不同.日本沼虾的δ13C值范围比秀丽白虾大,频率分布相对集中在-25.0‰～-23.0‰区间,表明其摄食的食物来源更广,对某些饵料生物有所偏好.另外,日本沼虾与秀丽白虾的营养生态位重叠程度较大,表明二者的主要食物来源相同,在食物网中占据的营养级相近,存在着激烈的种间竞争.在鄱阳湖中,日本沼虾占有的营养生态位和生态宽幅大于秀丽白虾;而在洞庭湖的研究结果则相反,主要是由于采样区域生境的差异及人类活动干扰的程度不同所致.     

无锡市大气中类二噁英多氯联苯污染水平

为了了解无锡市大气中类二噁英多氯联苯(Dioxin-like PCBs,DL-PCBs)水平,利用大流量空气采样器在无锡市分别采集了6个气相和6个颗粒相大气样品,气相色谱-质谱(GC-NCI-MS)测定样品中12种类二噁英多氯联苯。结果显示,大气样品中∑_(12)DL-PCBs的总浓度(气相+颗粒相)为1157～2 747 fg/m³,平均浓度为1759 fg/m3,平均浓度为1759 fg/m³。其中,气相的浓度为11 124～2 721 fg/m3。其中,气相的浓度为11 124～2 721 fg/m³,平均值为1 701fg/m3,平均值为1 701fg/m³;颗粒相的浓度为26～143 fg/m3;颗粒相的浓度为26～143 fg/m³,平均值为58fg/m3,平均值为58fg/m³。气相中∑_(12)DL-PCB含量占总量的97%,而颗粒相仅占3%。DL-PCBs的总毒性当量(气相+颗粒相)为2.16～4.47fg TEQ/m3。气相中∑_(12)DL-PCB含量占总量的97%,而颗粒相仅占3%。DL-PCBs的总毒性当量(气相+颗粒相)为2.16～4.47fg TEQ/m³,平均值为3.53fg TEQ/m3,平均值为3.53fg TEQ/m³。DL-PCBs单体中PCB-118的浓度最高,平均占总浓度的54%,其次是PCB-105和PCB-77,PCB+81在所有样品中均未检出。在所有DL-PCBs中,毒性当量浓度的主要贡献者为PCB-126,其平均贡献率为95%,其次为PCB-169,平均贡献率为3%。     

不同类型湖泊沉积物中氮释放规律研究

通过对武汉市东湖子湖郭郑湖、庙湖以及南湖这3个不同类型的湖泊进行释氮模拟实验,结果表明:(1)在厌氧条件下,不同污染程度的湖泊中沉积物释氮作用均比较明显。为了抑制沉积物向上覆水释氮,控制湖泊富营养化,保持湖泊较高的溶解氧水平是必要的。(2)在厌氧条件下,高温对不同类型湖泊总氮和氨氮的释放均能起到促进作用。(3)沉积物与上覆水间污染物的浓度梯度越大,总氮和氨氮的释放速率与释氮量也越大,此时温度的影响不明显。(4)通过比较3类湖泊沉积物上覆水中总氮和氨氮两者的释放浓度可知,氨氮的释放贡献十分显著,因此控制氨氮的释放量对于控制湖泊氮释放量具有显著效果。     

人工湿地处理不同废水工艺与植物优化配置研究

从各种废水处理技术类型及其处理效果与经济效益出发,针对近年来人工湿地技术的应用情况,综述了国内外利用人工湿地技术处理生活污水、污染河流和富营养化水体、农村污水和畜牧养殖废水、城市地表径流、工业废水(包括造纸废水、油田废水、矿区废水等)等方面的进展,分析了人工湿地处理不同废水的工艺流程,并对湿地植物优化配置提出了相应建议,旨在为人工湿地处理废水的工程应用提供技术参考.