在线固相萃取-超高效液相色谱法检测水中14种有机磷酸酯

与传统固相萃取耗时长、工作量大、有机溶剂使用量多相比,本文建立了一种在线固相萃取-超高效液相色谱串联质谱方法同时测定地表水中14种有机磷酸酯的新方法.地表水样过膜后,直接注入在线固相萃取净化装置,经净化后进入分离柱分离,用乙腈和0.1%的甲酸水溶液梯度洗脱,采用电喷雾离子源正离子多反应监测模式,对14种有机磷酸酯类化合物进行检测,内标法定量.该方法分析时长13.0 min,方法的线性相关系数R~20.98,地表水和自来水样品的加标回收率在64.8%—113%,相对标准偏差RSD在1.2%—9.3%,检出限为0.1—2.7 ng·L~(-1).与常规方法相比,该方法提高了分析通量和灵敏度,准确度好,操作简便,适用于地表水和自来水中有机磷酸酯的检测.     

耐盐苯酚降解菌Staphylococcus sp.的分离及降解特性

从巴丹吉林沙漠盐湖表层沉积物中筛选到一株高效耐盐苯酚降解菌CL.测定了菌株CL的生理生化指标、16S rRNA基因序列,通过动力学模型探究了该菌株的生长和苯酚降解特性,同时考察了固定化对其耐受及降解苯酚能力的影响.结果表明,菌株CL属于葡萄球菌属(Staphylococcus sp.),在温度30℃、pH 7.0—8.0、盐度0—10%和苯酚浓度100—200 mg·L~(-1)条件下,该菌株能高效降解苯酚,其降解率均在85%以上.菌株CL对不同浓度苯酚的降解符合Haldane模型,其最大比降解速率和抑制常数分别为0.32 h~(-1)和351.70 mg·L~(-1),同时该菌株在不同盐度下对苯酚的降解符合Ghose and Tyagi模型.固定化可以明显增加菌株CL对苯酚的降解和耐受能力.菌株CL在高盐环境下能够高效降解苯酚,具有生物处理高盐含酚废水的潜力.     

UV-254 nm活化过硫酸盐降解麻黄碱的影响因素和机理

采用UV-254 nm活化过硫酸盐高级氧化技术去除水中污染物麻黄碱(EPH),并研究了其降解动力学过程和降解机理.考察了过硫酸盐(PS)投加量、EPH的初始浓度、不同pH值及不同离子(HCO~-_3、NO~-_3、Cl~-)对降解效果的影响.结果表明,UV-254 nm活化过硫酸盐工艺能有效去除实验条件下的EPH,其氧化降解反应符合二级动力学方程.EPH去除率随着PS投加量的增加而增大.pH对降解反应有较大的影响,在pH=7的条件下,反应速率最快,表观反应动力学常数(k_(obs))为0.467 min~(-1).进一步研究表明,HCO~-_3、NO~-_3和Cl~-对EPH的降解都存在抑制作用,在相同浓度下,其抑制程度依次为Cl~- NO~-_3 HCO~-_3.通过UPLC-MS/MS鉴定了麻黄碱降解的中间体,并提出了可能的降解机理和转化途径.     

Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.