Mitigating construction safety risks using prevention through design

Introduction

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD).

Method

This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs.

Results

Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction.

Impact on industry

The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance.     

Monitoring of sources and atmospheric processes controlling air quality in an urban Mediterranean environment

Different monitoring parameters (PM mass concentrations, number–size distribution, black carbon, gaseous pollutants, and chemical composition, among others) are currently used in air quality studies. Urban aerosols are the result of several sources and atmospheric processes, which suggests that a single monitoring technique is insufficient to quantitatively evaluate all of them.This study assesses the suitability of a number of monitoring techniques (PM mass concentrations, number and size distribution of ultra-fine particles, levels of gaseous pollutants, and a complete chemical characterization of PM₁₀ and PM_2.5) by examining the response of those techniques to the different emission sources and/or atmospheric processes affecting an urban Mediterranean area (Barcelona, NE Spain).The results of this work reveal that the PM mass, the number concentration and the chemical composition give different, but complementary, information. Whereas the mineral matter, a key atmospheric aerosol component across the Mediterranean, is not properly quantitatively assessed by measuring sub-micrometric particles, the monitoring of the number concentration is indispensable to interpret the origin of specific aerosol episodes. Furthermore, the chemical composition yields very relevant information to deduce the causes of specific pollution episodes.The number concentration of ultra-fine particles in urban areas is strongly dependent upon vehicle exhaust emissions, which may cause adverse health impacts. Moreover, urban Mediterranean environments are favourable to produce nucleation-mode particles (<20 nm) with photochemical origin. In those cases, these particles are expected to be of high solubility and consequently their toxicity may differ from that of traffic-generated ultra-fine particles. Thus, the use of a single monitoring parameter to evaluate the health effects seems to be not enough.     

Monitoring of firefighters exposure to smoke during fire experiments in Portugal

Forest fires represent a serious threat to public security in Europe due to the large burned area. Moreover, smoke pollution due to forest fire events is an important public health issue for the communities directly affected, and particularly for the personnel involved in firefighting operations. Aiming to contribute to the scientific knowledge concerning firefighters exposure to forest fires smoke, data of individual exposure to carbon monoxide, nitrogen dioxide, volatile organic compounds, and particulate matter were obtained during experimental field fires for a group of 10 firefighters equipped with portable “in continuum” measuring devices. Measured values are very high exceeding the Occupational Exposure Standard limits, in particular for peak limit thresholds. These are the first measurements and analysis of firefighter's individual exposure to toxic gases and particles in fire smoke experiments in Europe. However, they already indicate that urgent measures to avoid these levels of exposure are needed.     

Interactive effects of metal contamination and pathogenic organisms on the introduced marine bivalve Ruditapes philippinarum in European populations

In natural environment, marine organisms are concomitantly exposed to pollutants and multiple disease agents resulting in detrimental interactions. The present study evaluated interactive effects of metal contamination (cadmium) and pathogenic organisms (trematode parasites Himasthla elongata and pathogenic bacteria Vibrio tapetis) singularly and in combination on the bivalve Ruditapes philippinarum, an introduced species to Europe, under laboratory controlled conditions. After 7 days, metal bioaccumulation and pathogen load were analyzed as well as metallothionein (MT) response and hemocyte concentrations and activities. Results showed that infection by opportunistic pathogens affects metal accumulation, leading to maximal Cd accumulation in co-infected clams. Among stressors only V. tapetis induced significant effects on immune parameters whereas a particular interaction “trematode-bacteria” was shown on MT responses. Despite low trematode infection in agreement with the resistant status of R. philippinarum to these macroparasites, significant interaction with bacteria and metal occurred. Such results highlight the necessity of taking pathogens into account in ecotoxicological studies.     

Diastereoisomer- and enantiomer-specific determination of hexabromocyclododecane in fish oil for food and feed

Fish oils are one of the main sources of ω-3 fatty acids. However, they can present elevated levels of some lipophilic pollutants, such as hexabromocyclododecanes (HBCDs). Since data about HBCDs in fish oil samples are very limited, in this study, 25 samples of fish oil for feed and food have been analyzed. Total HBCDs, as well as, α-, β- and γ-diastereoisomers have been determined. Total HBCDs ranged from 0.09 to 26.8 ng g⁻¹, with higher concentrations in fish oil for feed (average value of 9.69 ng g⁻¹) than those for food (1.14 ng g⁻¹). Concentrations of α-HBCD (average value of 4.12 ng g⁻¹ in feed samples and 0.48 ng g⁻¹ in food samples) and γ-HBCD (5.05 and 0.43 ng g⁻¹ respectively) were higher than that of β-HBCD (0.52 and 0.19 ng g⁻¹ respectively) in most of the samples. However, none of them was predominant in the samples. Concentrations of HBCDs were compared to concentrations of other pollutants and correlation between dioxin and dioxin-like PCBs levels and HBCDs levels were observed. Intake of HBCDs was calculated for fish oil with human consumption purposes and it ranged from 0.08 to 5.38 ng HBCDs d⁻¹, which could contribute significantly to HBCDs total intake. Enantiomeric fractions were also determined. No clear enrichment was observed for γ-HBCD, while (−)-α-HBCD enrichment was detected in some samples.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Marku?ovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation–equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite?>?pyrite?>?tetrahedrite?>?arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16–8.12) and the waters (pH 7.00–8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu?>?Sb?>?Hg?>?As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52–7.96) and low concentrations of dissolved metal(loid)s (<5–7.0 μg/L Cu, <0.1–0.3 μg/L Hg, 5.0–16 μg/L As, and 5.0–43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.     

Periods of non-feeding in Polysyncraton lacazei (Ascidiacea: Didemnidae): a rejuvenative process?

Polysyncraton lacazei (Giard) (Ascidiacea: Didemnidae) displays short periods of non-feeding during the warm season in the northwestern Mediterranean Sea (NE of Spain). These periods were analyzed from 1988 to 1990 by monitoring naturally occurring colonies and by morphological and histological observation of non-feeding colonies. During this phase the surface of the colonies is covered by a glassy pellicle and the siphonal apertures are sealed. The phenomenon consists of a reabsorption of the branchial portion of the zooids and a budding of new thoraces. This process does not fit into either the propagative or survival categories of budding proposed for ascidians, and is interpreted as a rejuvenative phenomenon which extends the life span of the zooids.     

Carrier detection and microsatellite analysis of duchenne and becker muscular dystrophy in spanish families

Duchenne and Becker muscular dystrophy (D/BMD) are usually problematical when trying to determine the carrier status of at-risk women, which usually has to be based on haplotype or dosage analysis on Southern blots. Using multiplex polymerase chain reaction (PCR) analysis, we have detected deletions in 20 out of 44 D/BMD families with living affected members (45·5 per cent), more often in sporadic cases of DMD (14/22 with detectable deletion) than in familial ones (4/15), the majority (15/20) occurring in the distal region of the D/BMD gene. Four highly informative short tandem repeat polymorphisms (STRPs), which lie within the distal deletion hot spot of the D/BMD gene, can show loss of heterozygosity in carrier females, providing direct evidence of their carrier status. These STRPs greatly improve informativity, with a combined heterozygosity of 100 per cent and with the majority of families informative for three of the four STRPs. In 14/15 (93 per cent) of the families with distal deletions, the STRPs provided direct information on carrier status, and in some cases, they provide valuable information on recombination breakpoints and non-paternity.     

The return of the giants: ecological effects of an increasing elephant population

Northern Botswana and adjacent areas, have the world's largest population of African elephant (Loxodonta africana). However, a 100 years ago elephants were rare following excessive hunting. Simultaneously, ungulate populations were severely reduced by decease. The ecological effects of the reduction in large herbivores must have been substantial, but are little known. Today, however, ecosystem changes following the increase in elephant numbers cause considerable concern in Botswana. This was the background for the "BONIC" project, investigating the interactions between the increasing elephant population and other ecosystem components and processes. Results confirm that the ecosystem is changing following the increase in elephant and ungulate populations, and, presumably, developing towards a situation resembling that before the reduction of large herbivores. We see no ecological reasons to artificially change elephant numbers. There are, however, economic and social reasons to control elephants, and their range in northern Botswana may have to be artificially restricted.