Modeling porosity reductions caused by mineral fouling in continuous-wall permeable reactive barriers

A study was conducted to assess key factors to include when modeling porosity reductions caused by mineral fouling in permeable reactive barriers (PRBs) containing granular zero valent iron. The public domain codes MODFLOW and RT3D were used and a geochemical algorithm was developed for RT3D to simulate geochemical reactions occurring in PRBs. Results of simulations conducted with the model show that the largest porosity reductions occur between the entrance and mid-plane of the PRB as a result of precipitation of carbonate minerals and that smaller porosity reductions occur between the mid-plane and exit face due to precipitation of ferrous hydroxide. These findings are consistent with field and laboratory observations, as well as modeling predictions made by others. Parametric studies were conducted to identify the most important variables to include in a model evaluating porosity reduction. These studies showed that three minerals (CaCO3, FeCO3, and Fe(OH)2 (am)) account for more than 99% of the porosity reductions that were predicted. The porosity reduction is sensitive to influent concentrations of HCO3-, Ca2+, CO3(2-), and dissolved oxygen, the anaerobic iron corrosion rate, and the rates of CaCO3 and FeCO3 formation. The predictions also show that porosity reductions in PRBs can be spatially variable and mineral forming ions penetrate deeper into the PRB as a result of flow heterogeneities, which reflects the balance between the rate of mass transport and geochemical reaction rates. Level of aquifer heterogeneity and the contrast in hydraulic conductivity between the aquifer and PRB are the most important hydraulic variables affecting porosity reduction. Spatial continuity of aquifer hydraulic conductivity is less significant.     

化学溶胀法分离废弃线路板中金属与基板

废弃线路板的粉碎和所含金属组分的高效解离是后续分选回收的前提条件。本研究分别使用乙二胺等10种溶剂浸泡废弃线路板,比较对线路板中铜箔与基板间剥离强度的影响,从而筛选出4种有代表性的溶剂,即溶剂D、溶剂F、丙酮和水, 比较废弃线路板经化学溶胀后的单体解离度和获得一定粒径分布的颗粒所需的破碎时间。研究结果表明,化学溶胀后破碎能大幅提高金属的单体解离度,浸泡效果的优良排序为：溶剂D>溶剂F>丙酮>水;浸泡时间越长,浸泡温度越高,对剥离强度的降低越有利;使用溶剂D在150℃、3 h或140℃、5 h的工艺下浸泡废弃线路板,可以使铜箔与基板自动脱落。研究结果为后续的分选提供了便利的条件。     

数据挖掘平台在珊瑚礁生态系统保护中的初步构建研究

近年来,由于疾病、污染、海洋温度上升以及人类的过度利用,珊瑚礁正面临着致命的毁灭.为了保护珊瑚礁生态系统,迫切需要收集和分析数据,找出影响珊瑚礁生存的主要因素.数据挖掘技术可用于复杂系统的行为建模和预测,将数据挖掘算法与珊瑚礁生态系统数据相结合,构建生态数据挖掘平台,为预测珊瑚礁的生长趋势提供决策支持.针对海洋数据多源性、多态性和多样性的特点,提出改进的数据挖掘平台,并详细论述了数据源层、ETL工具层和数据仓库的结构和功能.     

投加聚氨酯泡沫微生物固定化载体的SBBR脱氮除磷实验研究

研究投加聚氨酯泡沫微生物固定化载体的SBBR脱氮除磷效果及机理.在SBR中填充聚氨酯泡沫微生物固定化载体,形成序批式生物膜反应器(SBBR).SBBR以实际生活污水为处理对象,在A/O运行工况下对微生物进行培养驯化,并在SBBR运行稳定时研究其脱氮除磷效果.研究结果表明,SBBR中的聚氨酯泡沫微生物固定化载体在空间上形...     

膜生物反应器处理微污染水源水的研究与应用现状

膜生物反应器及其组合工艺能实现水源水中微污染物的有效去除,是一种新型高效水处理工艺.总结了膜生物反应器处理微污染水源水的研究与应用现状、污染物去除效果和机制;在分析膜污染机制基础上归纳了膜污染控制和污染膜清洗方式,展望了膜生物反应器在给水领域应用需克服解决的技术难点.     

灭多威的环境毒理研究进展

本文对近年来有关灭多威的环境毒理研究进行了综述。内容包括，在土壤和水中的归趋；在作物上的残留；在高等动物体内的代谢；对土壤生物群落的影响；对水生生物、天敌和有益节肢动物、高等动物和人以及植物的毒性。     

Electrochemical oxidation of bisphenol A. Application to the removal of bisphenol A using a carbon fiber electrode

Leachate samples with a high strength of ammonium-nitrogen (NH4+-N) were collected from a local landfill site in Hong Kong. Two experiments were carried out to study (1) the inhibition of microbial activity of activated sludge by NH4+-N and (2) the chemical precipitation of NH4+-N from leachate as a preliminary treatment prior to the activated sludge process. The experimental results demonstrated that the efficiency of COD removal decreased from 97.7% to 78.1%, and the dehydrogenase activity of activated sludge decreased from 9.29 to 4.93 microg TF/mg MLSS, respectively, when the NH4+-N concentration increased from 53 to 800 mg/l. The experiment also demonstrated that the NH4+-N in the leachate can be quickly precipitated as MgNH4PO4 x 6H2O after addition of MgCl2 x 6H2O + Na2HPO4 x 12H2O. The NH4+-N concentration was reduced from 5618 to 112 mg/l within 15 min when a molar ratio of Mg2+:NH+:PO4(3-) = 1:1:1 was used. The optimum pH to reach the minimum solubility of MgNH4PO4 x 6H2O was found to be in the range of 8.5-9.0. Attention should be given to the high salinity formed in the treated leachate by using MgCl2 x 6H2O + Na2HPO4 x 12H2O, which may affect microbial activity in the following biological treatment processes. Using two other combinations of chemicals [MgO + 85%H3PO4 and Ca(H2PO4)2 x H2O + MgSO4 x 7H2O] could minimise salinity generation after precipitation, while they were less efficient for NH4+-N removal.     

Polycyclic aromatic hydrocarbon (PAH) deposition to and exchange at the air-water interface of Luhu, an urban lake in Guangzhou, China

Urban lakes are vulnerable to the accumulation of semivolatile organic compounds, such as PAHs from wet and dry atmospheric deposition. Little was reported on the seasonal patterns of atmospheric deposition of PAHs under Asian monsoon climate. Bulk (dry + wet) particle deposition, air-water diffusion exchange, and vapour wet deposition of PAHs in a small urban lake in Guangzhou were estimated based on a year-round monitoring. The total PAH particle deposition fluxes observed were 0.44-3.46 μg m⁻² day⁻¹. The mean air-water diffusive exchange flux was 20.7 μg m⁻² day⁻¹. The vapour deposition fluxes of PAHs ranged 0.15-8.26 μg m⁻² day⁻¹. Remarkable seasonal variations of particulate PAH deposition, air-water exchange fluxes and vapour wet deposition were influenced by seasonal changes in meteorological parameters. The deposition fluxes were predominantly controlled by the precipitation intensity in wet season whereas by atmospheric concentration in dry season.     

响应曲面法优化絮凝处理木薯淀粉废水

采用中心复合实验设计和响应面分析法研究复合絮凝剂聚合氯化铝锌(PAZC)和聚合氯化铝(PAC)混凝处理木薯淀粉废水,进行设计和分析,以溶液pH值和絮凝剂用量为考察因素,分别以COD、浊度去除率为考察指标,选用最佳优化数学模型描述考察指标和考察因素之间的数学关系,并以设定PAZC和PAC对COD去除率(65%),浊度去除率(90%)和SS去除率(90%)的目标值,通过等高线叠加图预测最优实验条件,得到PAZC投量为6.5 mg/L,pH为7.7时,COD去除率和浊度去除率分别达到最大为76.6%和99.9%;PAC投量为19.2 mg/L,pH为7.8时,COD去除率和浊度去除率最大值分别为64.4%和97.1%。经对最优条件进行验证,预测值与验证实验平均值接近。     

饮用水生物处理中微生物量和活性的测定方法

微生物量和微生物活性是饮用水生物处理工艺设计与运行的重要参数。总结论述了适用于表示饮用水生物处理过程生物膜中微生物数量和活性的几种主要指标的测定方法。