External force-assisted laser forming process for gaining high bending angles

Laser forming process is used in forming and bending of metallic and non-metallic sheets. Laser beam irradiation causes a localized temperature increase and a localized mechanical strength decrease. In this article, an external mechanical force is added to a laser beam irradiation, which is called external force-assisted laser forming process, to gain a 90-degree bending angle. Furthermore, Numerical simulation of the process is performed to achieve a good understanding of the process. Simulation results show that more than two-third of the final forming is due to the laser beam irradiation. Equivalent plastic strain values during laser forming and external force-assisted laser forming processes are compared. Results show that equivalent plastic strain in laser forming process increases in a step pattern, with increasing in scan pass numbers. This occurs because when the laser beam irradiates on the sheet surface, it reduces the yield strength of the sheet. Equivalent plastic strain in external force-assisted laser forming process has an oscillatory step nature. This attributes to simultaneous effects of strain hardening and thermal induced reduction of yield strength of the sheet. Simulations were in good accordance with experiments.     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.     

Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

Exploring the role of emotional intelligence in behavior-based safety coaching

INTRODUCTION: Safety coaching is an applied behavior analysis technique that involves interpersonal interaction to understand and manipulate environmental conditions that are directing (i.e., antecedent to) and motivating (i.e., consequences of) safety-related behavior. A safety coach must be skilled in interacting with others so as to understand their perspectives, communicate a point clearly, and be persuasive with behavior-based feedback. METHOD: This article discusses the evidence-based "ability model" of emotional intelligence and its relevance to the interpersonal aspect of the safety coaching process. RESULTS: Emotional intelligence has potential for improving safety-related efforts and other aspects of individuals' work and personal lives. Safety researchers and practitioners are therefore encouraged to gain an understanding of emotional intelligence and conduct and support research applying this construct toward injury prevention.     

Traffic behaviour among adolescents using mopeds and light motorcycles

INTRODUCTION: Motorcycling is recognized to be a relatively risky activity. Powered two wheelers (PTW) are classified as mopeds, light, and heavy motorcycles, the first two categories being denoted light PTWs. This paper reviews the scientific literature on accident risks and traffic behavior among users of light PTWs with the aim of clarifying the current state of knowledge. METHOD: Based on a risk analytical and an anthropological perspective on motorcycling, the paper discusses the significance of cultural and social factors as important aspects of safety. More targeted and effective safety measures, for example better training programs, are needed to prevent motorcycle accidents. This means developing a deeper understanding of the rider as an individual, and the individuals within different groups and settings. Why and how motorcyclists approach the road, its function as a social arena, the varieties of goals and values, and the motorcyclists' own perceptions of the behavior that ensures their "achievements" or "successes", are some of the issues. Today, this kind of knowledge is scarce and almost entirely absent from the scientific literature. RESULTS: We conclude that the massive quantities of data on numbers of accidents, the categorization of situations, the causal explanations related to speed, gender, age, lack of concentration so forth, can only be employed as support for safety measures as long as they are linked to social and cultural factors. IMPACT ON INDUSTRY: Risk informed decision making has become an integral part of authorities' and manufacturers' implementation of safety measures. This tendency is strengthened by the fact that the responsibility of product safety rests upon the manufacturers, cf. for example EU safety regulations. Therefore it is paramount that a thorough understanding of social and cultural factors related to the PTW driving is necessary for the industry to develop targeted and efficient safety measures.     

Evidence for a male-produced pheromone in <Emphasis Type="Italic">Tetropium fuscum</Emphasis> (F.) and <Emphasis Type="Italic">Tetropium cinnamopterum</Emphasis> (Kirby) (Coleoptera: Cerambycidae)

(E)-6,10-dimethyl-5,9-undecadien-2-ol (geranyl acetol), termed here fuscol, was identified as a male-produced pheromone emitted by Tetropium fuscum (F.) and Tetropium cinnamopterum Kirby. In field experiments, traps baited with synthetic fuscol alone were not significantly attractive, but the combination of fuscol plus host volatiles (a synthetic blend of monoterpenes plus ethanol) attracted significantly more male and female T. fuscum and female T. cinnamopterum than did host volatiles alone. This is the first homoterpenoid alcohol to be described in the Cerambycidae, and the first pheromone reported from the sub-family Spondylidinae.     

Artiodactyls from the Pondaung Formation (Myanmar): new data and reevaluation of the South Asian Faunal Province during the Middle Eocene

Although Asia is thought to have played a critical role in the radiation of artiodactyls, the fossil record of stem selenodonts (“dichobunoids”) remains dramatically poor in tropical Asian regions. In this study, we report a new dichobunid genus and species Cadutherium kyaukmagyii and a new basal ruminant genus and species Irrawadymeryx pondaungi, from the late Middle Eocene Pondaung Formation, Central Myanmar. Although the scarcity of the present material prevents any attempts to investigate the phylogenetic relationships of Cadutherium with contemporaneous forms from other Holarctic landmasses, this new form shed new light on the diversity of these small rabbit-like ungulates during a key period of their evolutionary history. Reexamination of the small-bodied artiodactyls from Pondaung leads us to propose new identifications of certain published specimens and, in turn, to investigate the temporal and geographic distribution of taxa recognized in the Pondaung Formation. Although fragmentary, these potential new taxa reveal an unsuspected diversity of small forms among artiodactyls of Pondaung. This addition to the Eocene record of dichobunoids and early ruminants provides further insight in the diversity of dental patterns among small artiodactyls from the Pondaung Formation and attests to the antiquity of these groups in Southeast Asia.     

Last Glacial mammals in South America: a new scenario from the Tarija Basin (Bolivia)

The chronology, sedimentary history, and paleoecology of the Tarija Basin (Bolivia), one of the richest Pleistocene mammalian sites in South America, are revised here based on a multidisciplinary study, including stratigraphy, sedimentology, geomorphology, paleontology, isotope geochemistry, and ¹⁴C geochronology. Previous studies have indicated a Middle Pleistocene age for this classic locality. We have been able to obtain a series of ¹⁴C dates encompassing all the fossil-bearing sequences previously studied in the Tarija Basin. The dated layers range in age from about 44,000 to 21,000 radiocarbon years before present (BP), indicating that the Tarija fauna is much younger than previously thought. Glacial advances correlated to marine isotopic stages (MIS) 4 and 2 (ca. 62 and 20 ka BP, respectively) are also documented at the base and at the very top of the Tarija–Padcaya succession, respectively, indicating that the Bolivian Altiplano was not dry but sustained an ice cap during the Last Glacial Maximum. The results of this multidisciplinary study enable us to redefine the chronological limits of the Tarija sequence and of its faunal assemblage and to shift this paleontological, paleoclimatological, and paleoecological framework to the time interval from MIS 4 to MIS 2.     

A male gift to its partner? Cyanogenic glycosides in the spermatophore of longwing butterflies (<Emphasis Type="Italic">Heliconius</Emphasis>)

Males of several insect species transfer nuptial gifts to females during mating, typically in the form of a protein-rich spermatophore. In chemically defended species, males could potentially enhance such a gift with chemicals that help protect the female, her eggs, or both. This was shown for lepidopteran species that accumulate pyrrolizidine alkaloids. Most Heliconius butterflies are presumably protected from predators by virtue of de novo synthesized and/or sequestered cyanogenic glycosides. Males of Heliconius species are known to transfer nutritional gifts to the females but whether defensive chemicals could also be transferred is not known. To ascertain whether transfer of cyanogens occurs, we dissected freshly mated females from nine different Heliconius species and analyzed spermatophores for cyanogenic glycosides. We found cyanogens in the spermatophores of all nine species. This is the first time cyanogenic glycosides are reported in the spermatophores of arthropods. We discuss the implications of these findings for Heliconius biology and for other cyanogenic insects as well. We suggest that chemically defended species commonly lace their nuptial gifts with defensive chemicals to improve gift quality.     

Triterpene saponin hemi-biosynthesis of a leaf beetle’s (<Emphasis Type="Italic">Platyphora kollari</Emphasis>) defensive secretion

The adults of the leaf beetle Platyphora kollari (Chrysomelidae) are able to metabolise the oleanane triterpene β-amyrin (1) into the glycoside 3-O-β-d-glucopyranosyl-(1→4)-β-d-glucuronopyranosyl-hederagenin (2) that is stored in their defensive glands. The aim of this study was to test the hypothesis that oleanolic acid (3) is an intermediate in the conversion of 1 into 2 and to check whether the sequestration of pentacyclic triterpenes is selective in favour of β-amyrin (1). To this end, adults of P. kollari were fed with Ipomoea batatas leaf disks painted with a solution of [2,2,3-²H₃]oleanolic acid or [2,2,3-²H₃]α-amyrin and the secretion of their defensive glands analysed by HPLC–ESIMS. The data presented in this work indicated that the first step of the transformation of β-amyrin (1) into the sequestered glycoside 2 is its oxidation into oleanolic acid (3) and that this conversion is selective but not specific in favour of β-amyrin (1).