Impurities in industrial grade 4,4'-isopropylidene diphenol (bisphenol A): possible implications for estrogenic activity

Fifteen trace impurities, including a novel cyclohexene derivative, have been identified and quantified in samples of an industrial grade of the oestrogen-active compound 4,4'-isopropylidene diphenol (bisphenol A). All of these compounds, like bisphenol A itself, possess phenolic hydroxyl groups para to other substituents and all thus might also have oestrogenic properties. Published studies on the endocrine disrupting properties of bisphenol A have not considered potentially active impurities but full assessment of the oestrogenicity of bisphenol A, as it is used commercially, will become possible when adequate supplies of these compounds are available through synthesis.     

Remediation of soil contaminated with dioxins by subcritical water extraction

The effectiveness of subcritical water extraction (SCWE) was examined for removing dioxins from contaminated soil. Most dioxins in the soil sample were reduced at 300 degrees C or more, but decreased dioxin concentrations were also observed at 150 degrees C. After 4 h of extraction, 99.4%, 94.5% and 60% of PCDDs were removed from samples at 350, 300 and 150 degrees C, respectively. It was also determined that degradation of dioxins had occurred, since the sum of dioxins in the soil plus water extracts after the experiments had considerably decreased. This study revealed that pressurizing is not essential for the removal of dioxins. Reduction was complete within 30 min at 350 degrees C; however, it took a much longer time at lower temperatures. The results of addition experiments in which OCDDs were added to different types of soil samples have shown that dechlorination is one of the major reaction pathways. After addition of OCDD to soil samples, experiments were carried out to examine in detail the degradation pathways of PCDDs. The removal rates and congener profiles varied among soil types. Although it was previously assumed that removal rates and congener profiles depended on the chemical components in soil, nonparametric statistical analysis revealed no significant relationship between the rate of reduction and elements present in the soil. It was confirmed from isomer patterns that dechlorination of the 2,3,7,8-positions in PCDDs takes place somewhat faster than for the 1,4,6,9-positions.     

Modified clean-up for PBDD,PBDF and PBDE with an active carbon column--its application to sediments

A clean-up method for polybrominated dibenzo-p-dioxins (PBDDs), dibenzofurans (PBDFs) and diphenyl ethers (PBDEs) was modified using combinations of multi-layered silica gel, Florisil and active carbon columns. By using active carbon column chromatography in the final procedure, PBDEs were well separated from PBDD/Fs in an elution test with reference standards. We report the application of this method to sediment samples taken from industrialized areas in Japan. These sediments contained PBDEs ranging in concentration from 13 to 2394 pg/g, dry wt. PBDEs did not interfere with the quantification of PBDD/Fs. In addition, PBDEs found in the PBDD/F fraction did not interfere with the identification of PBDFs using the HRGC/HRMS separation method. Some 2,3,7,8-tetra- to hexabrominated dioxins and furans were also detected in the sediment samples.     

Are direct developers more locally adapted than planktonic developers?

The hypothesis that populations of direct developers exhibit greater geographic differentiation in life history features than populations of planktonic developers, was tested with two species of grazing snails of the genus Littorina from 1986 to 1987. Littorina sitkana (direct developer) and L. scutulata (planktonic developer) coexist on sun- and wave-sheltered beaches from Alaska to Oregon, USA. Seasonal patterns in growth, survival and reproduction were monitored for samples from four geographically separated populations of each species grown in population cages at a common site, Friday Harbor, Washington, USA. The environmental and population effects on growth in the two species were determined in a four-way reciprocal transplant experiment with the same populations. Both the direct and planktonic developers exhibited geographic differentiation in life history features. Differentiation in the direct developer occurred over distances shorter than 30 km, while differentiation in the planktonic developer occurred over the 500 km distance examined (greater than their larvae would likely travel).     

Caste-fate determination primarily occurs after adult emergence in a primitively eusocial paper wasp: significance of the photoperiod during the adult stage

Independent-founding paper wasps constitute a major group of primitively eusocial insects, and when caste-fate determination occurs in temperate species of these wasps, particularly regarding whether it occurs before or after emergence, remains unclear. No critical morphological differences occur between potential queens of the next generation (often called gynes) and workers in primitively eusocial insects. The gynes of temperate species are characterized by diapausing, and the nutrients available during the larval stage have often been believed to determine caste fate. Short days usually induce diapause in temperate nonsocial insects, although few investigations of the effects of day length on caste-fate determination in paper wasps have been conducted. By exposing individuals to different combinations of short and long days during the immature and adult stages, we show for the first time that short days during the adult stage (but not during the immature stage) facilitated caste-fate determination toward gynes in a paper wasp. Moreover, the decision to diapause partly depended on changes in the photoperiod during the pupal and adult stages. The size of the adult also affected caste-fate determination, with diapause more likely to occur in large adults, but this size effect did not occur when individuals were exposed to many short days during the pupal stage. In addition, all adults except for a small proportion of smaller individuals prepared for diapause under short days. These findings suggest that the photoperiod is a higher priority cue than adult size.     

Development of a novel hybrid microwave-heater reactor for paper-based waste treatment

It is necessary to develop a medical waste management system featuring nonburning treatment and safety functions for small medical institutions. In this article, the development of a waste management system without oxygen injection was achieved by means of hybrid heating using microwave energy and an electric heater. The shape of the microwave reactor was a rectangular parallelepiped with a volume of about 0.1 m³. In the experimental setup, microwave energy (2.45 GHz, about 800 W) was injected from the top of the reactor, while the heater (about 1 kW) was located at the bottom. Heat insulators were set into all the walls of the reactor. The gases generated in the system were vented through water and activated carbon. Five paper-based diapers with absorbed water were used as the waste sample. For the evaluation of performance, the reduction rate was defined as the ratio (in percent) of the weight before and after treatment. The reduction rate as a function of treatment time and the effect of the position of the waste in the reactor on the reduction rate and the uniformity of treatment were examined for about 3 kg of waste. It was found that the reduction rate reached as low as 4.2% at 3 h and then 3% after 8 h. The treated profile strongly depended on the position of the waste in the reactor. In particular, it was clarified that a metal cylindrical enclosure and a needle electrode played an important role in attaining uniform treatment of the waste.     

Improvement of permeability of waste sludge by mixing with slag or construction and demolition waste

To determine the allowable ratio of waste sludge required to ensure an aerobic zone in the landfill, we investigated sludge permeability, which involved mixing sludge, the major landfill waste in Japan, at different mixing ratios with other wastes (slag and construction and demolition waste (C&D)). We measured parameters of sample permeability and analyzed parameters that exert a large influence on oxygen penetration depth with a simulation model accounting for both diffusion and convection driven by temperature gradients. We also determined the critical volumetric contents in which gas and/or water permeability change significantly when sludge is mixed with sand or gravel. From the results of the simulations, gas permeability of the layer, the difference between inside and outside temperatures and the oxygen consumption rate exert a large influence on the resulting oxygen penetration depth. The allowable ratio of sludge required to ensure an aerobic zone in the landfill was determined by considering the balance of the above three parameters. By keeping volumetric sludge content to below 25%, air convection and oxygen penetration depth of several meters were achieved in the modeling.     

Effect of polyethylene addition to coal on hydrogasification enhancement

Hydrogasification of a coal/polyethylene mixture was carried out using a low concentration of polyethylene in the samples with the aim of industrial application. Coal/polyethylene mixtures in the ratio of 90:10 and 75:25 were used in this study. A hydrogasification experiment was conducted using a unique batch reactor at 1073 K under a 7.1 MPa hydrogen atmosphere. The reaction time varied from 1 to 80 s. The results revealed a methane yield from the mixtures that was noticeably greater than the values calculated from experimental results obtained from coal and polyethylene respectively, assuming no mutual influences. A significant synergistic effect was observed even when the polyethylene content was as low as 10 %. It is suggested that there might be an advantage in hydrogasification processes if waste plastics are mixed with coal, such content being practically assumed.     

A Microcomputer-based Forecasting Model: Potential Applications for Emergency Response Plans and Air Quality Studies

Most atmospheric transport and diffusion models within emergency response systems have very limited physics and are forced to rely on the assumption that wind and turbulence conditions at the time of the release will be representative over the period for which dispersion must be predicted. For releases where the principal concern is about the first few kilometers of travel, such an assumption is appropriate. However, for large accidental releases during stable conditions, the plume may travel for several hours before it is diluted to safe levels and the assumption of persistence may be inappropriate, particularly for transport in complex terrain. Under these circumstances, a model that can forecast changes in wind and turbulence conditions is required. We have installed such a model on microcomputers and tested it in complex terrain near Salt Lake City. One-hour tracer releases produced surface concentrations that remain high for much longer times than that expected based on one hour’ travel time with the mean wind at the source height. Furthermore, relatively large concentrations were found at distances of over 40 km from the source. The model was generally able to reproduce the principal features described by the measurements, although some effects of subgrid scale terrain were missed.     

Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.