SO2暴露方式与油松生长的关系

苗龄为87d的油松(Pinus tabulaeformis Carr.)于2002-07-01～08-29在3个处理组进行SO₂暴露实验60昼夜,处理1和处理2在24h中SO₂浓度分别为0.1 mg·m^-3和0.2 mg·m^-3,处理3每日6h SO₂浓度为0.5 mg·m^-3,18h SO2浓度为0.1mg·m^-3.经SO₂暴露后,处理1油松针叶气孔保卫细胞、针叶颜色未见异常;叶绿素含量、类胡萝卜素含量、光合速率、蒸腾速率、单株干重、相对生长速率与对照组无显著差异;但针叶含硫量比对照增加17%,从针叶渗出的钾离子量比对照增加22%.处理2油松气孔保卫细胞、针叶颜色未见异常;叶绿素含量、光合速率、蒸腾速率与对照组无显著差异;类胡萝卜素含量下降5%,针叶含硫量增加92%,从针叶渗出的钾离子量比对照增加67%,单株干重下降4.5%,相对生长速率下降0.6mg·(g·d)^-1.处理3油松气孔保卫细胞、针叶颜色发现异常;叶绿素含量与对照组相似,但类胡萝卜素含量下降21%,含硫量增加104%,从针叶渗出的钾离子量比对照增加89%,光合速率下降5%,蒸腾速率增加8%,单株干重下降7.6%,相对生长速率下降1.3mg·(g·d)^-1.     

Amelioration effect of humic acid extracted from solubilized excess sludge on saline-alkali soil

In this study, the main characteristics and soil amendment effects on the saline–alkali soil of humic acid extracted from solubilized excess sludge (SS-HA) were investigated. The excess sludge was solubilized prior to extraction to improve the humic acid recovery rate. The structural features of SS-HA were characterized by an elemental analysis, Fourier transform infrared spectroscopy, and ¹H-nuclear magnetic resonance spectroscopy, and compared with those of HA extracted from non-solubilized excess sludge (ES-HA). The results showed that extraction efficiency of humic acid was enhanced by using solubilization, although structural properties of humic acid extracted from solubilized excess sludge were almost the same as those of ES-HA. To study a utilization method of SS-HA, the soil amendment effects on saline–alkali soil by mixture of SS-HA were investigated with a model soil-column experiment. SS-HA reduced the pH of the saline–alkali soil, and the effect was immediately observed or faster than the case in which only peat is added. Moreover, the cation exchangeable capacity of the saline–alkali soil was enhanced by addition of SS-HA.     

Comparison of polybrominated diphenyl ethers in fish, vegetables, and meats and levels in human milk of nursing women in Japan

At present, little is known about the occurrence of polybrominated diphenyl ethers (PBDEs) in fish and food products sold in Japan. To investigate whether human exposure to PBDEs through the diet is significant, the concentrations of PBDEs were determined in fish and in meat and vegetables sold in two food markets in the city of Hirakata, Osaka prefecture. The concentrations of PBDEs in the breast milk of 12 primiparae nursing women at one month after delivery also were determined to ascertain the relationship between the levels found in the diet and levels in humans. sigma PBDE concentrations ranged between 21 and 1650 pg/g fresh weight in the edible tissues of five species of fish and one shellfish species. The highest concentrations were measured in yellow-fin tuna, followed by short-necked clam, salmon, yellowtail, mackerel and young yellowtail. Interestingly, sigma PBDE concentrations were not statistically significantly different in two cultured mackerel samples from Japan and mackerel collected from northern European waters. sigma PBDE concentrations in beef, pork and chicken meat (ranging between 6.25 and 63.6 pg/g fresh weight) and in three different vegetables (ranging between 38.4 and 134 pg/g fresh weight) were significantly lower than the concentrations in fish. In human milk, sigma PBDE concentrations ranged between 668 and 2840 pg/g lipid basis, which is comparable to the levels in populations of nursing women reported in Sweden and elsewhere. There was a strong positive relationship between PBDE concentrations in human milk and dietary intake of fish and shellfish, which was established in the women from responses to a questionaire on food consumption habits. The results of this study of food products commonly consumed in Japan and the levels found in nursing women raise a concern about low level PBDE contamination of fish and other foods intended for human consumption.     

Adsorption fein zerriebener Teilchen der stark basischen Anionenaustauscher an der Grenzfläche zweier Flüssigkeiten und ihre Anwendungen zur mikrochemischen Analyse

The Science of Nature -     

Indirect identification of an unstable intermediate in γ-HCH degradation by Pseudomonas paucimobilis UT26

While a postulated intermediate, 1,3,4,5-tetrachlorocyclohexa-1,4-diene(1,4-TCDN), is one of the key-compounds in γ-hexachlorocyclohexane(γ-HCH) degradation by Pseudomonas paucimobilis UT26(UT26), it has neither been isolated nor identified yet. Thus, an indirect identification was attempted to demonstrate its existence by a chemical oxidation of the microbial degradation products in situ.

1,2,4,5-Tetrachlorobenzene(1,2,4,5-TeCB) was newly produced by the chemical oxidation with hydrogen peroxide under iron(II) of W medium containing degradation products in situ of γ-1,3,4,5,6-pentachlorocyclohexene(γ-PCCH) by Escherichia coli MV1184(E. coli) which possesses the dehydrochlorinating activity of UT26. The chemical oxidation required the preceding enzymatic reactions to γ-PCCH by E. coli for the production of 1,2,4,5-TeCB. In facts, 1,2,4,5-TeCB was not produced from γ-PCCH by either of the chemical or enzymatic reaction alone.

Considering these results and the fact that hydrogen peroxide is known to dehydrogenate chemical compounds, it was concluded that 1,2,4,5-TeCB was produced directly from the unstable intermediate, 1,4-TCDN, on yielded from γ-PCCH by an enzymatic dehydrochlorination.     

Abundance, growth and life cycle of the mesopelagic amphipod Primno abyssalis (Hyperiidea: Phrosinidae) in the Oyashio region, western subarctic Pacific

Abundance and life-cycle features of the mesopelagic hyperiid amphipod Primno abyssalis (formerly P. macropa) in the Oyashio region, western subarctic Pacific, were investigated using samples collected between July 1996 and July 1998. P. abyssalis was collected throughout the entire survey period, with abundance peaks occurring in spring to autumn. While all maturity stages of males and females were observed throughout the study period, the peak reproduction season was in summer. Instar analysis based on the segment number of the pleopod rami indicated that hatched juveniles molted 10 times before becoming adult males and 13 times before becoming adult females. Judging from the dry and ash-free dry weights of each instar, males and females continued to feed throughout the final instar stage. Based on cohort analysis of seasonal samples and laboratory observations on molting frequencies, growth in body length of P. abyssalis was linear with time, and estimated generation lengths were 2.3-3.8 years for females and 1.4-1.9 years for males. Brood size of females ranged from 66 to 337 and increased with increasing female body length. Lifetime fecundity, calculated as the sum of six successive broods, was 1,004. Compared with P. abyssalis in the southern Sea of Japan, those in the Oyashio region have a larger number of adult instars (six versus five for females, three 3 vs one for males), a lower growth rate (0.014 mm day^-1 vs 0.021 mm day^-1), and mature earlier (instar 13 vs instar 15 for females; instar 10 vs instar 11 for males). These characteristics are considered to be advantageous life-history traits to counteract higher niche competition within the mesopelagic community and higher predation pressure by mesopelagic fishes in the Oyashio region than in the Sea of Japan.     

Effect of metabolism on bioconcentration of geometric isomers of d-phenothrin in fish

Yearling carp (Cyprinus carpio) were exposed to d-phenothrin (a 1:4 mixture of d-cis and d-trans isomers) in the absence and the presence of piperonyl butoxide under the flow-through test condition and the bioconcentration factors (BCF's) of the geometric isomers were separately evaluated. It was demonstrated that BCF values for the d-cis isomer were significantly higher by 1.1 to 2.2-fold than those for the d-trans isomer and the subsequent exposure in the presence of piperonyl butoxide resulted in elevated BCF values for the d-cis isomer, but no remarkable change in BCF's was observed for the d-trans isomer. The elevation observed here was presumably attributable to a reduced elimination caused by inhibited oxidative reactions characteristic to the d-cis isomer. The contribution of biotransformation to the elimination rate constant (K₃/K₂ was estimated to be 2.3–11. Thus, the result was well explained by a distinct oxidative metabolism of the d-cis isomer and a significance of metabolism in bioconcentration phenomenon was exemplified.     

The influence of lower extremity postures on kinematics and injuries of cyclists in vehicle side collisions

Objective: A cyclist assumes various cyclic postures of the lower extremities while pushing the pedals in a rotary motion while pedaling. In order to protect cyclists in collisions, it is necessary to understand what influence these postures have on the global kinematics and injuries of the cyclist.

Method: Finite element (FE) analyses using models of a cyclist, bicycle, and car were conducted. In the simulations, the Total Human Model of Safety (THUMS) occupant model was employed as a cyclist, and the simulation was set up such that the cyclist was hit from its side by a car. Three representative postures of the lower extremities of the cyclist were examined, and the kinematics and injury risk of the cyclist were compared to those obtained by a pedestrian FE model. The risk of a lower extremity injury was assessed based on the knee shear displacement and the tibia bending moment.

Results: When the knee position of the cyclist was higher than the hood leading edge, the hood leading edge contacted the leg of the cyclist, and the pelvis slid over the hood top and the wrap-around distance (WAD) of the cyclist's head was large. The knee was shear loaded by the hood leading edge, and the anterior cruciate ligament (ACL) ruptured. The tibia bending moment was less than the injury threshold. When the cyclist's knee position was lower than the hood leading edge, the hood leading edge contacted the thigh of the cyclist, and the cyclist rotated with the femur as the pivot point about the hood leading edge. In this case, the head impact location of the cyclist against the car was comparable to that of the pedestrian collision. The knee shear displacement and the tibia bending moment were less than the injury thresholds.

Conclusion: The knee height of the cyclist relative to the hood leading edge affected the global kinematics and the head impact location against the car. The loading mode of the lower extremities was also dependent on the initial positions of the lower extremities relative to the car structures. In the foot up and front posture, the knee was loaded in a lateral shear direction by the hood leading edge and as a result the ACL ruptured. The bicycle frame and the struck-side lower extremity interacted and could influence the loadings on lower extremities.     

Proximate composition of household waste and applicability of waste management technologies by source separation in Hanoi,Vietnam

The organic fraction of municipal solid wastes in Southeast Asia, which has a high moisture content, accounts for a large proportion of total waste. Local governments need to pay adequate attention to the composition of wastes to determine alternative waste management technologies. This study proposed the use of a triangle diagram to describe changes in proximate composition and rates of successful source separation of municipal solid waste and to identify technical challenges about alternative waste management technologies such as incineration, composting, and refuse-derived fuel production based on physical and proximate composition analysis of household waste sampled in Hanoi, Vietnam, as a case study. The analysis indicated the effectiveness of different types of source separation as well as different levels of successful achievement of source separation as an adjustment mechanism for the proximate composition of waste. Proper categorization of wastes for source separation is necessary for the appropriate use of alternative waste management technologies. The results showed that, at a source separation rate of just greater than 0.52 in a three-way separation scheme, the waste separated as combustible waste would be suitable for incineration with energy recovery. Based on well-designed schemes of source separation, alternative waste management technologies can be applied.