Atmospheric particle characterization, distribution, and deposition in Xi'an, Shaanxi Province, Central China

Physical characterization and chemical analysis of settled dusts collected in Xi’an from November 2007 to December 2008 show that (1) dust deposition rates ranged from 14.6 to 350.4 g m⁻² yr⁻¹. The average deposition rate (76.7 g m⁻² yr⁻¹) ranks the 11th out of 56 dust deposition rates observed throughout the world. The coal-burning power was the major particle source; (2) on average (except site 4), ∼10% of the settled dusts having size <2.6, ∼30% having size <10.5, and >70% having size <30 μm; (3) the concentrations for 20 out of 27 elements analyzed were upto 18 times higher than their soil background values in China. With such high deposition rates of dusts that contain elevated levels of toxic elements, actions should be taken to reduce emission and studies are needed to assess the potential impacts of settled particles on surface ecosystem, water resource, and human health in the area.     

Internally mixed sea salt, soot, and sulfates at Macao, a coastal city in South China

Direct observation of the mixing state of aerosol particles in a coastal urban city is critical to understand atmospheric processing and hygroscopic growth in humid air. Morphology, composition, and mixing state of individual aerosol particles from Macao, located south of the Pearl River Delta (PRD) and 100 km west of Hong Kong, were investigated using scanning electron microscopy (SEM) and transmission electron microscopy coupled with energy-dispersive X-ray spectrometry (TEM/EDX). SEM images show that soot and roughly spherical particles are prevalent in the samples. Based on the compositions of individual aerosol particles, aerosol particles with roughly spherical shape are classified into coarse Na-rich and fine S-rich particles. TEM/EDX indicates that each Na-rich particle consists of a Na-S core and NaNO3 shell. Even in the absence of heavy pollution, the marine sea salt particles were completely depleted in chloride, and Na-related sulfates and nitrates were enriched in Macao air. The reason could be that SO2 from the polluted PRD and ships in the South China Sea and NO2 from vehicles in the city sped up the chlorine depletion in sea salt through heterogeneous reactions. Fresh soot particles from vehicular emissions mainly occur near curbside. However, there are many aged soot particles in the sampling site surrounded by main roads 200 to 400 m away, suggesting that the fresh soot likely underwent a quick aging. Overall, secondary nitrates and sulfates internally mixed with soot and sea salt particles can totally change their surface hygroscopicity in coastal cities.     

间歇浸取对废物水泥窑共处置产品中Cr和As释放的影响

研究间歇浸取条件下废物水泥窑共处置产品中重金属Cr、As的释放,对水泥产品在实际应用中的环境安全性评价有重要意义.通过模拟煅烧实验制取含Cr和As的水泥熟料,并制取混凝土样品,采用pH影响实验和扩散浸出实验,研究了混凝土中Cr和As的溶解特性及其间歇浸取对混凝土中Cr和As释放的影响.结果表明,浸取方式对浸取液pH有较...     

凹凸棒土的氨氮吸附性能研究

在以氨氮去除率为指标,在振荡时间60 min,振荡温度25℃,振荡速度140r/min的条件下发现凹凸棒土的最佳投加量2.5 g;添加凹凸棒土可以加强SBR生物系统去除氨氮的能力;拟合凹凸棒土吸附氨氮的等温线方程符合Freundlich吸附模型.     

添加不同量的腐殖酸对猪粪堆肥中主要养分变化的影响

腐殖酸是一种可以控制堆肥氮素损失的天然固定剂,通过研究腐殖酸对猪粪堆肥过程中主要养分含量变化的影响,确定了腐殖酸的最佳加入量.结果表明,加入5%含量(占鲜猪粪重)的腐殖酸最有利于发酵反应的进行,能够促进有机质的分解,有效控制氮素损失,可使速效钾含量增加,但对有效磷的转化能力影响不大;与其他处理相比,加入5%含量的腐殖酸...     

拜耳法赤泥粒径分级预处理的研究

赤泥是从铝土矿中提取氧化铝的过程中产生的工业废渣.分析了拜耳法赤泥的粒径分布,以及主要化学组成和矿物组成在不同粒径赤泥中的变化规律.在此基础上,提出先将赤泥粒径分级预处理,然后根据粗细粒径赤泥的差异分别进行回收利用的思路.研究结果表明,赤泥中粒径大于0.075 mm的粗颗粒以铁、硅、钙为主,实践证明可以通过磁选或重选工...     

粉煤灰-混凝-SBR法处理高浓度洗涤剂废水

针对车间合成洗涤剂生产废水浓度高、可生化性差、负荷大等特点,采用粉煤灰吸附-混凝进行物化处理和SBR法生物处理洗涤剂废水.运行结果表明:在常温下,当处理车间废水初始COD为6000～7000 mg/L、LAS为600～650 mg/L时,物化处理COD和LAS去除率分别为76.4%和77.1%,其中粉煤灰、PAC的投加...     

日本城市污水再生利用方面的经验分析

日本开展污水再生利用工作已经有30年的历史,经过多年的积累,在综合管理、技术开发应用等方面取得了一定的成果.对日本在再生水政策标准、生产模式、处理技术和技术经济性、安全输配和水质安全性等方面的概况进行了汇总分析,并对缺水地区--福冈、东京都和横滨的再生水生产利用实例进行了介绍,以期对我国城市污水再生利用具有一定的借鉴.     

pH、溶解氧、叶绿素a之间相关性研究Ⅰ:养殖水体

利用国内、外近20年的资料和饮用水水源地潘家口水库现场围隔实验结果,分析养殖水体中pH、溶解氧(dissolved oxygen,DO)和叶绿素a之间的相互关系.结果表明,当叶绿素a平均含量低于10μg/L时,水体交换弱的夏季和秋季养殖水域水体中pH、DO与叶绿素a无明显相关甚至无相关;水体交换强的夏季和秋季养殖水域水...     

生物预处理/常规与常规工艺处理西江原水的对比

采用生物预处理／常规与常规工艺处理西江微污染原水,对主要污染物的去除效果工艺进行了比较。结果表明,生物预处理／常规工艺对COD_Mn、氨氮的平均去除率达48.9%、62.3%,比常规工艺提高了18.9%、28.4%。2种工艺对浊度的去除率相当,皆为95％左右。生物预处理采用高速给水曝气生物滤池工艺,反冲洗采用气水联合方式,48 h过滤水头损失＜2 kPa,冲洗前后过滤水头损失变化量均值＜0.4 kPa。