Changes of polyamine levels in roots of Sagittaria sagittifolia L. under copper stress

Introduction

The goal of the present study was to investigate the effects of Cu contamination on the above-mentioned biochemical and physiological parameters in order to explore possible prevention strategies against heavy metal stress.

Materials and methods

Effects of copper (Cu) on the roots of Sagittaria sagittifolia L. were studied after 10 days of treatment at five concentration levels. The accumulation of Cu, the generation rate of O₂ ^·?C, the contents of thiobarbituric acid reactive substances (TBARS) and polyamines, as well as the activities of arginine decarboxylase (ADC) and polyamine oxidase (PAO) in the roots were measured and analyzed.

Results and discussion

It was observed that endogenous Cu content increased in roots of S. sagittifolia L. in a concentration-dependent manner, along with an increased production of O₂ ^·?C. TBARS content increased progressively up to 5 ??mol l^?1 Cu. A constant increase in ADC activity was also observed. The results indicated that lower Cu concentrations (2.5 and 5 ??mol l^?1, respectively) had greater enhancing effect on the contents of free Put and perchloric acid-soluble conjugated (PS-conjugated) putrescine (Put), while Cu treatments at different concentration levels had similar enhancing effect on the content of perchloric acid-insoluble bound Put. In total, Put content in each Cu-treated group was higher than that in the control group. PAO activity was inhibited up to 10 ??mol l^?1 Cu but enhanced at higher Cu concentrations (20 and 40 ??mol l^?1). This explained the initial rise and subsequent decline of the contents of all forms of spermine (Spm), free and PS-conjugated spermidine (Spd). However, with the increase of Cu concentration, total Spm content increased gradually while total Spd content decreased. Our results suggest that Cu is phytotoxic to the roots of S. sagittifolia L. at high concentrations, and that the increased Spm level is not sufficient to resist Cu-induced oxidative damages.     

Chlorination of chlortoluron: kinetics, pathways and chloroform formation

Chlortoluron chlorination is studied in the pH range of 3-10 at 25 ± 1 °C. The chlorination kinetics can be well described by a second-order kinetics model, first-order in chlorine and first-order in chlortoluron. The apparent rate constants were determined and found to be minimum at pH 6, maximum at pH 3 and medium at alkaline conditions. The rate constant of each predominant elementary reactions (i.e., the acid-catalyzed reaction of chlortoluron with HOCl, the reaction of chlortoluron with HOCl and the reaction of chlortoluron with OCl⁻) was calculated as 3.12 (± 0.10) × 10⁷ M⁻² h⁻¹, 3.11 (±0.39) × 10² M⁻¹ h⁻¹ and 3.06 (±0.47) × 10³ M⁻¹ h⁻¹, respectively. The main chlortoluron chlorination by-products were identified by gas chromatography-mass spectrometry (GC-MS) with purge-and-trap pretreatment, ultra-performance liquid chromatography-electrospray ionization-MS and GC-electron capture detector. Six volatile disinfection by-products were identified including chloroform (CF), dichloroacetonitrile, 1,1-dichloropropanone, 1,1,1-trichloropropanone, dichloronitromethane and trichloronitromethane. Degradation pathways of chlortoluron chlorination were then proposed. High concentrations of CF were generated during chlortoluron chlorination, with maximum CF yield at circumneutral pH range in solution.     

Atmospheric particle characterization, distribution, and deposition in Xi'an, Shaanxi Province, Central China

Physical characterization and chemical analysis of settled dusts collected in Xi’an from November 2007 to December 2008 show that (1) dust deposition rates ranged from 14.6 to 350.4 g m⁻² yr⁻¹. The average deposition rate (76.7 g m⁻² yr⁻¹) ranks the 11th out of 56 dust deposition rates observed throughout the world. The coal-burning power was the major particle source; (2) on average (except site 4), ∼10% of the settled dusts having size <2.6, ∼30% having size <10.5, and >70% having size <30 μm; (3) the concentrations for 20 out of 27 elements analyzed were upto 18 times higher than their soil background values in China. With such high deposition rates of dusts that contain elevated levels of toxic elements, actions should be taken to reduce emission and studies are needed to assess the potential impacts of settled particles on surface ecosystem, water resource, and human health in the area.     

钛基IrO2-SnO2电极在烟气海水脱硫恢复系统中的应用

采用浸渍-热分解法制备了含IrOx-TiO2中间层的IrO2-SnO2电极,得到的电极具有较高的析氯电催化活性和较强的稳定性,并通过电化学氧化法对Na2SO3海水脱硫模拟液进行处理,考察了电流密度、温度、pH值和电解时间等电解工艺参数对Na2SO3去除率和化学需氧量COD的影响。结果表明,在电流密度为200 mA/cm^2,pH值为3.5,电解440 mg/L的Na2SO3海水脱硫模拟液,15 min时Na2SO3去除率可达96.5%,COD去除率可达82.6%。     

间歇浸取对废物水泥窑共处置产品中Cr和As释放的影响

研究间歇浸取条件下废物水泥窑共处置产品中重金属Cr、As的释放,对水泥产品在实际应用中的环境安全性评价有重要意义.通过模拟煅烧实验制取含Cr和As的水泥熟料,并制取混凝土样品,采用pH影响实验和扩散浸出实验,研究了混凝土中Cr和As的溶解特性及其间歇浸取对混凝土中Cr和As释放的影响.结果表明,浸取方式对浸取液pH有较...     

凹凸棒土的氨氮吸附性能研究

在以氨氮去除率为指标,在振荡时间60 min,振荡温度25℃,振荡速度140r/min的条件下发现凹凸棒土的最佳投加量2.5 g;添加凹凸棒土可以加强SBR生物系统去除氨氮的能力;拟合凹凸棒土吸附氨氮的等温线方程符合Freundlich吸附模型.     

添加不同量的腐殖酸对猪粪堆肥中主要养分变化的影响

腐殖酸是一种可以控制堆肥氮素损失的天然固定剂,通过研究腐殖酸对猪粪堆肥过程中主要养分含量变化的影响,确定了腐殖酸的最佳加入量.结果表明,加入5%含量(占鲜猪粪重)的腐殖酸最有利于发酵反应的进行,能够促进有机质的分解,有效控制氮素损失,可使速效钾含量增加,但对有效磷的转化能力影响不大;与其他处理相比,加入5%含量的腐殖酸...     

不同来源废水COD、TOC与Cl-的关系

通过对含盐化工废水(A)、受潮汐影响的河流水(B)、城市生活污水处理厂排水(C)、采油废水(D)4种不同来源废水进行为期15 d的采样监测,测定了其COD、TOC和Cl-浓度,分析比较了3种废水指标之间的关系,其中COD分别使用重铬酸钾法、氯气校正法和碘化钾碱性高锰酸钾法3种方法进行测定.实验结果表明,4种废水Cl-浓...