天车通过式集烟罩在45t转炉烟尘治理中的应用

在此提出了天车通过式捕集工艺方法。并在45t转炉的烟气治理上得到成功应用,为解决45t以下中小转炉的问题开辟了新的途径。     

人群聚集场所的风险评价技术研究

分析人群聚集场所事故产生的原因,提出人群聚集场所风险评价的方法。鉴于人群聚集场所的复杂性和不确定性因素较多,认为定性风险评价较为适合。并阐述定性风险评价技术的步骤和详细内容。     

多轴差分吸收光谱仪对大气污染物SO2、NO2、O3的立体监测

多轴差分吸收光谱仪（MAX—DOAS）是用来监测大气中痕量气体成分的专用仪器,它能同时自动监测SO2、NO2和03三种污染气体,得到的垂直柱浓度对研究污染物的时空分布特点具有重要意义。分析了2011年5月下旬至2012年4月中旬期间MAX—DOAS在重庆市的测量数据,结果表明：夏季SO2的柱浓度高于其它季节,并在每个季节都出现了峰值：SO2与NO2之间浓度变化趋势相同,且最大小时浓度值都集中在上午;O3垂直柱浓度受气象条件和臭氧前体物的影响呈夏季高、秋冬低的季节性变化;通过多元回归建立了O3柱浓度与气象因素、前体物的关系式。     

重金属污染河道底泥稳定化固化修复工程技术研究

介绍了某市排污渠重金属污染治理工程中对重金属污染底泥稳定化固化处理技术的研究,研究了不同添加比的水泥对砾砂质和黏质底泥中重金属的无害化处理效果及规律,介绍了固化稳定化工艺流程和设备,可供国内同类工程项目借鉴。     

垃圾焚烧电厂排气筒中的氯化氢的测定

直接用离子色谱淋洗液吸收垃圾焚烧电厂排气筒中低浓度的氯化氢,不仅减少了分析中的两次稀释操作,而且还降低方法的检出限,可用于同类污染源低浓度氯化氢的测定。     

Distribution of C/N/P stoichiometry in suspended particulate matter and surface sediment in a bay under serious anthropogenic influence: Daya Bay,China

Environmental Science and Pollution Research - The C/N/P stoichiometry of organic matter can provide useful information for better understanding of the effects of human activities on aquatic...     

Formation mechanism and control strategy for particulate nitrate in China

Over the past decade, fine particulate matter (PM) pollution in China has been abated significantly, benefiting from strict emission control measures, but particulate nitrate continues to rise. Here, we review the progress in particulate nitrate (pNO₃⁻) pollution characterization, nitrate formation mechanisms, and the proposed control strategies in China. The spatial and temporal distributions of pNO₃⁻ are summarized. The current status of knowledge on the chemical mechanism is updated, and the significance of its formation pathways is assessed by various approaches such as field observation and modelling of nitrate production rate, as well as isotopic analysis. The factors impacting pNO₃⁻ formation and the corresponding pollution regulation strategies are discussed, in which the importance of atmospheric oxidation capacity and ammonia are addressed. Finally, the challenges and open questions in pNO₃⁻ pollution control in China are outlined.     

Research on ammonia emissions characteristics from light-duty gasoline vehicles

In this study, ammonia emissions characteristics of typical light-duty gasoline vehicles were obtained through laboratory vehicle bench test and combined with New European Driving Cycle (NEDC) condition and Worldwide Harmonized Light Vehicles Test Cycle (WLTC) condition. The influence of ambient temperature on ammonia emissions is mainly concentrated in the cold start stage. The influence of ambient temperature on ammonia emission is shown that the ammonia emissions of light-duty gasoline vehicles under ambient temperature conditions (14 and 23°C) are lower than those under low ambient temperature conditions (?7°C) and high ambient temperature conditions (35 and 40°C). The influence of TWC on ammonia emission is shown that ammonia is a by-product of the catalytic reduction reaction of conventional gas pollutants in the exhaust gas in the TWC. Under NEDC operating conditions and WLTC operating conditions, ammonia emissions after the catalyst are 45 times and 72 times that before the catalyst, respectively. In terms of ammonia emissions control strategy research, Pd/Rh combination can reduce NH₃ formation more effectively than catalyst with a single Pd formula. Precise control of the engine's air-fuel ratio and combination with the optimized matched precious metal ratio TWC can effectively reduce ammonia emissions.     

延迟焦化装置非密闭除焦工序职业病危害程度分析

目的 了解延迟焦化装置非密闭除焦工序职业病危害程度.方法 选取某大型炼化企业延迟焦化装置一套,通过现场调查,确定非密闭式除焦工序存在的主要职业病危害因素及其接触岗位,对职业病危害因素进行检测,评判并分析各岗位化学有害因素职业接触水平,确定职业病危害程度.结果 除焦工岗位接触硫化氢、粉尘危害因素检测结果超标,装车工接触粉尘危害因素检测结果超标.除焦工硫化氢、粉尘接触水平均为Ⅳ级,装车工粉尘接触水平为Ⅳ级.结论 加强延迟焦化装置非密闭除焦工序个人使用的职业病防护用品的配备,新建延迟焦化装置应尽量选择密闭除焦技术,当前运行的存在非密闭除焦工序的延迟焦化装置应进行工艺技术改造.     

Electro-oxidation of Ni (II)-citrate complexes at BDD electrode and simultaneous recovery of metallic nickel by electrodeposition

The simultaneous electro-oxidation of Ni (II)-citrate and electrodeposition recovery of nickel metal were attempted in a combined electro-oxidation-electrodeposition reactor with a boron-doped diamond (BDD) anode and a polished titanium cathode. Effects of initial nickel citrate concentration, current density, initial pH, electrode spacing, electrolyte type, and initial electrolyte dosage on electrochemical performance were examined. The efficiencies of Ni (II)-citrate removal and nickel metal recovery were determined to be 100% and over 72%, respectively, under the optimized conditions (10 mA/cm², pH 4.09, 80 mmol/L Na₂SO₄, initial Ni (II)-citrate concentration of 75 mg/L, electrode spacing of 1 cm, and 180 min of electrolysis). Energy consumption increased with increased current density, and the energy consumption was 0.032 kWh/L at a current density of 10 mA/cm² (pH 6.58). The deposits at the cathode were characterized by scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). These characterization results indicated that the purity of metallic nickel in cathodic deposition was over 95%. The electrochemical system exhibited a prospective approach to oxidize metal complexes and recover metallic nickel.